| Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re after because most of the thoughts and projects Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are actually many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice in this bundle quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who buy it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found across the internet. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will be able to construct all types of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. .

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will be able to build some really wonderful furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It will be a subject of conversation when you have friends come over to visit. They’ll ask: How can you create it? Just how long can it take to finish the job? What kind of wood did you use? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you discuss your work, a feeling of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? .

Begin with an idea in your mind of what you want to construct then get a excellent woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. A few woodworking program suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a few. Obviously, you can begin with as grand a woodworking plan as you choose. On the other hand, the chances are if you start out with a small woodworking project initially, you will get a better chance of keyword completing the job.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking tools, but it is simple to break the bank buying a lot of tools you may not utilize all that frequently. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood glue! Obviously, you will need a dry area to work and might need a set of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools that novices will need. You may always increase your arsenal as you gain experience!

Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the writers in woodworking magazines do a story about the best way to increase your woodworking craft. When it’s showing you the way you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home

If you are a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Making something new with your hands is a special sense. Do not begin a job if you’re not interested, as this may land you at a terrible location.

2. Consider the main reason for making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and examine the time you have, before you start with a job.

4. Start jobs that you can finish. If you are in the middle of some work, then it is wise to not begin any project in any way.

Starting Your First Woodworking Shop

If you keep these vital points in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to begin with. As a newcomer, always pick a project which has a very basic build up or a very simple structure. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools,

Tools are the ways through which you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You can even purchase keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for novices, but having it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Based on the sort of project that you would like to complete, pricing could be set. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will be a little hefty. Therefore, it is better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you do not need to purchase any more material other than the timber ply.

Time and Directions

Directions are one of the principal things which every newcomer should follow. Instructions guide is very simple to understand the procedure, what to do and how to do it. Time also plays a significant part in the building of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword that will allow you to achieve success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you know the purpose of woodworking, the item you need to construct, the tools you need to own and the typical time it’s possible to devote every day; then you are all set to go.

Conclusion,

All these strategies and education will make the woodworking projects and plans for novices fast to finish. Always make sure that you have all of the vital tools, materials, space ready. Read the instructions for building a product handy. Appropriate strategy and preparation can allow you to make a fantastic woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home

Folks when trying to find a way to pass time or want an alternate way to generate money they generally turn into a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be very careful when choosing which job to start out with because there are jobs which may be too difficult for a beginner. But don’t be concerned about that because we will give you guidelines on the ideal way to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your project you need to know if you have the available tools to work on that project. Try not to spend a good deal of cash on buying gear when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will provide you time to research unique projects and learn so many things. That is why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different projects.
It’s extremely important you know about different kinds of wood available for creating jobs. Expect carpenters use several types of wood quality for decorating pieces, learning what type of wood that they use will allow you to prepare the wood you will need for specific projects you may choose to pursue.
Once you understand the basics of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

practice makes perfect so be sure you practice your work daily if possible. Try out a lot of layouts using a variety of tools so that you can find the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of tools and equipment. A small home workshop may generate a wide array of simple projects which will allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you will perform your woodworking, based on the dimensions of your home, you may have the ability to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the remainder of the family. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to function in. if you can have a dedicated place for a workshop all the better. Floor gear and bench top gear can stay in place from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you can shop and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the seat to home your hand power tools along with a pegboard above the seat to hang additional equipment. Put in a woodworking at one end of the seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT,

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools at your regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. There are plenty of quality lightly used tools out there that belong to individuals who stumbled on that one molding project around the house or obtained tools as presents which they will never use. You can usually buy tools for all these sellers for under half of the initial price and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple added bucks on a inexpensive piece of gear. The excess cost of time and travel in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can end up being the most versatile tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to build an whole house. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your second project. After choosing the right saw put in a quality blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut corners. It’s ideal for cutting holes in timber too like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you might discover that your palm sander using a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in wood pieces. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure remains the same. Get a set of the maximum clamps that you could spend. You may contact them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces in your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices which will not crush or damage many of the various woods that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most often used tools. Buy a good excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your shop you may not use the tape in these spans, the larger tape steps offer more rigid tapes which won’t flop around and slide off the ending of planks. Assessing when you’re on your own will be a lot easier, and naturally, quality tape steps can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners 

Woodworking is referred to as the construction or the creation of items from wood. You can produce a great deal of different objects from woodworking and these objects can be as large as gazebos or as small as wooden toys. No matter how large or small your private project maybe you will be very likely to do that goal with woodworking. In addition, woodworking has many private in addition to psychological benefits! In this article, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

Individuals who build things out of wood are generally known keyword because carpenters. Carpenters can work on a number of woodworking projects and job types. For instance, some carpenters own their carpentry company and these individuals have the luxury to place their work hours. This advantage allows carpenters the opportunity to spend more time with their own families and have less job strain. Raising kids is a really tough task no matter what way you approach the task! For a carpenter who possesses their own business, this task may not be hard because that person is going to have more time to be a part of his or her child’s life. By playing a larger role in the life of your child you’ll be having a larger influence on the type of character that kid develops into, which is a huge concern for any loving parent. In addition to these advantages, carpentry can also have health benefits too.

Starting Your First Woodworking Shop

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically healthy is really important and keyword will help prevent the occurrence of various illnesses later on in life. By being physically fit you can decrease chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a range of different disorders.

, Do It Yourself Woodworking Saves Cash:

I feel as I paid way too much when I visit home improvement shops and buy patio furniture, and I am sure that I am not the only person who has felt like this! A successful business owner once advised me to constantly increase the sales price of a product to double everything you’ve obtained it for. This way, you always have the option to reduce the product to 50 percent away and come out without getting any losses. This seems like it may be exactly the same strategy that home improvement shops use in selling their own wooden furniture products. Regardless, there is a way that you can get around paying the extra money and that’s to do with building it yourself. Luckily, there are some really excellent woodworking products that offer thousands of comprehensive woodworking keyword plans for hundreds of different job types. So, you can really build whatever you need or see in almost any home improvement store. Doing something does require a bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Video: Woodworking Tools