10×16 Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re following because all the thoughts and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are actually many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People who are only getting started will find the ideas and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice within this bundle quite readily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his very best to direct them in every possible way he could, through simple to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners 10×16 Shed Plans

Woodworking is 1 hobby that can also be a rewarding career if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll be able to build all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. 10×16 Shed Plans.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will have the ability to create some really wonderful furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It will be a subject of conversation when you have friends come over to see. They’ll ask: How can you make it? Where did you get the woodworking programs? How long can it take to complete the project? What kind of wood did you use? What type of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you discuss your job, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners 10×16 Shed Plans

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? 10×16 Shed Plans.

Start with a concept in mind of what you want to construct then get a excellent woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to mention a few. Of course, you can start out with as grand a woodworking plan as you pick. On the other hand, the odds are if you start out using a little woodworking job at first, you’ll have a better prospect of keyword completing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you may not utilize all that often. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and might need a pair of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools that novices will need. You may always increase your toolbox as you get experience!

10×16 Shed Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the authors in woodworking magazines do a story on the best way best to increase your woodworking craft. Whether it is showing you how you can apply an end to a completed project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking 10×16 Shed Plans

If you’re a beginner and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you do not have the right information, instruction, and skill, you might land up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a few essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Creating something new with your hands is a particular sense. Don’t start a job if you are not interested, as this may land you at a terrible place.

2. Think of the primary reason for creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a job.

4. Start projects which you’re able to complete. If you are in the middle of a work, then it is wise not to begin any project in any way.

The Benefits of Woodworking 10×16 Shed Plans

If you keep these essential things in mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you want to start with. As a newcomer, always pick a project that has a very basic build up or a simple structure. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you can always proceed to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their tools. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, 10×16 Shed Plans

Tools would be the ways through which you will win the struggle of woodworking. Many people believe power tools are needs. But for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much simple for you. When you buy a hammer, always check the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws available in the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them will help you ahead of time woodworking. You might even buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking projects. Based on the sort of project that you would like to complete, pricing can be set. The simple the project, the less cost it involves. But at the beginning buying the tools will be a little hefty. Therefore, it’s much better to resolve a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t need to buy any more material other than the timber ply.

Time and Instructions

Instructions are among the primary things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is very simple to comprehend the process, what to do and how to get it done. It keyword is a systematic manual for completing the job. Time also plays an important role in the building of woodworking projects. Woodworking projects require time and therefore it’s necessary for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, the item you want to build, the tools you need to possess and the typical time it’s possible to devote every day; then you are all set to go.

Conclusion, 10×16 Shed Plans

These tips and instruction will create the woodworking projects and plans for beginners quickly to complete. Always ensure you have all the essential tools, materials, area prepared. Read the instructions for building an item handy. Appropriate strategy and planning will allow you to make a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners 10×16 Shed Plans

Folks if you’re looking for a way to pass time or desire an alternative way to generate money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be quite cautious when choosing which project to start out with because you will find projects which may be too difficult for a newbie. But don’t be concerned about that since we are going to provide you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your project you need to know if you have the available tools to work on that job. Try not to invest a good deal of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home 10×16 Shed Plans

Woodworking in your home will provide you time to explore different jobs and learn a lot of things. That is why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about various jobs.
It is extremely important you know more about different kinds of wood available for creating projects. Expect carpenters utilize different types of wood quality for decorating pieces, learning which kind of wood they use can allow you to prepare the wood you’ll need for certain projects you may want to pursue.
Once you know the basics of wood choice and the usage of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to satisfy your wants.

10×16 Shed Plans practice makes perfect so be sure you practice your work daily if possible. Try out lots of designs utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you can make a number of mistakes but with time you will learn how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking 10×16 Shed Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A small home workshop can generate a broad array of simple projects that will help you develop your creative and building skills while rewarding you with practical and artistic wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you’ll perform your woodworking, based on the size of your home, you may be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the remainder of the family. A good compromise could be the garage of your home.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking 10×16 Shed Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. 10×16 Shed Plans if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can remain in place from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. In the start, set up a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to home your hand power tools and a pegboard over the bench to hang other equipment. Install a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, 10×16 Shed Plans

The scope of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools in the local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality gently used tools out there which belong to individuals who stumbled on that 1 molding project around the home or received tools as presents which they will never use. You can usually purchase tools for all these sellers for less than half the initial cost and save even more money if you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a few extra dollars on a cheap piece of equipment. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this may prove to be the most flexible instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw could be used to build an whole house. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut corners. It is perfect for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit can be costly. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t need in your workshop. Buy an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you might discover that your palm sander with just a little bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it usually requires the beginner woodworker a few years to collect a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps which you could spend. You may contact them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the user to rapidly open and close the limbs with no dull handle rotation. The wood beamed surfaces on your vice will occasionally require replacement. I would rather use soft pine in my vices which will not crush or damage many of the various forests that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of the most often used tools. Purchase a good quality name brand tape measure with a wide tape usually in the 25-foot selection. Although in your shop you might not be using the tape at these spans, the bigger tape steps provide more rigid tapes that won’t flop around and slip off the end of planks. Measuring when you are on your own will be a great deal easier, and naturally, quality tape steps can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber.

What is Woodworking? Starting Your First Woodworking Shop 10×16 Shed Plans

Woodworking is known as the building or the creation of items from wood. You can produce a great deal of different objects from woodworking and these objects are often as large as gazebos or as little as wooden toys. However big or small your personal project maybe you will be quite likely to do that goal with woodworking. Additionally, woodworking has many personal as well as emotional benefits! In this guide, I am going to briefly identify some of the benefits for you.

Woodworking as a Career:

Individuals who build things out of wood are usually known keyword as carpenters. Carpenters can operate on a number of woodworking projects and job types. For instance, a few carpenters possess their carpentry business and these individuals have the luxury to place their job hours. This advantage enables carpenters the chance to spend more time with their families and also have less job strain. Raising kids is a very tough task regardless of what way you approach the endeavor! To get a carpenter who possesses their own business, this task might not be hard since that person is going to have more time to become part of her or his child’s lifetime. By playing a larger role in the life of your child you will be having a greater influence on the sort of character that child develops into, which is a massive concern for any loving parent. In addition to these benefits, carpentry may also have health benefits as well.

Woodwork Crafts – The Beginners Guide To Woodworking 10×16 Shed Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword can help prevent the incidence of various ailments in the foreseeable future life. By being physically healthy you can decrease chances that you will have a heart attack, have seizures, become a diabetic, and lower the odds of giving birth to a range of different disorders.

10×16 Shed Plans, Do It Yourself Woodworking Saves Cash:

I always feel like that I paid way too far when I visit home improvement shops and purchase patio furniture, and I am certain that I am not the only person that has felt this way! A successful business owner once advised me to constantly raise the sales price of a commodity to double everything you’ve got it for. In this manner, you can always reduce the product to 50 percent off and come out without getting any losses. This sounds like it might be the exact same tactic that home improvement stores use in selling their own wooden furniture products. Regardless, there is a way that you can get around paying the additional money and that’s to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of comprehensive woodworking keyword plans for countless different project types. So, you really can build whatever you want or see in almost any home improvement store. Doing something yourself does take a bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Law of triviality

Parkinson's law of triviality is C. Northcote Parkinson's 1957 argument that members of an organization give disproportionate weight to trivial issues.[1] Parkinson provides the example of a fictional committee whose job was to approve the plans for a nuclear power plant spending the majority of its time on discussions about relatively minor but easy-to-grasp issues, such as what materials to use for the staff bike shed, while neglecting the proposed design of the plant itself, which is far more important and a far more difficult and complex task.

The law has been applied to software development and other activities.[2] The terms bicycle-shed effect, bike-shed effect, and bike-shedding were coined as a metaphor to illuminate the law of triviality; it was popularised in the Berkeley Software Distribution community by the Danish software developer Poul-Henning Kamp in 1999[3] and has spread from there to the whole software industry.

The concept was first presented as a corollary of his broader "Parkinson's law" spoof of management. He dramatizes this "law of triviality" with the example of a committee's deliberations on an atomic reactor, contrasting it to deliberations on a bicycle shed. As he put it: "The time spent on any item of the agenda will be in inverse proportion to the sum [of money] involved." A reactor is so vastly expensive and complicated that an average person cannot understand it, so one assumes that those who work on it understand it. On the other hand, everyone can visualize a cheap, simple bicycle shed, so planning one can result in endless discussions because everyone involved wants to add a touch and show personal contribution.[4]

Video: Woodworking Projects