12 X 12 Shed Plans Free | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are following because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those who are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s simple step by step directions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice within this package quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who buy it will be backed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that are available across the net. Ted has done his best to guide them in every conceivable way he can, through simple to understand textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to purchase the essential hand and power tools that beginners will need. You may always add to your toolbox as you gain experience!

12 X 12 Shed Plans Free Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the authors in woodworking magazines do a story about how best to increase your woodworking craft. When it’s showing you how you can apply an end to a completed project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home 12 X 12 Shed Plans Free

If you’re just beginning and very enthusiastic about doing a DIY project for house then, woodworking could be interesting. If you don’t have the proper information, instruction, and ability, you may land up spending more time and money than you initially intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential factors that you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your own hands is a particular feeling. Do not start a project if you are not interested, because this might land you in a bad place.

2. Consider the main reason behind making this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a project.

4. Start projects which you’re able to finish. If you are in the middle of a work, then it is better to not begin any project in any way.

Starting Your First Woodworking Shop 12 X 12 Shed Plans Free

If you maintain these essential points in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects you want to begin with. As a beginner, always select a project that has a very basic build up or a simple construction. A few easy to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always proceed into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so that you have a better knowledge of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, 12 X 12 Shed Plans Free

Tools are the means whereby you will win the struggle of woodworking. A lot of people believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much easy for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws available on the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You can even buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for beginners, but having it might make work easier for you in a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Based on the type of job you would like to complete, pricing can be set. The simple the project, the less cost it involves. But at the beginning purchasing the tools will be a little hefty. Because of this, it is much better to fix a budget first on the resources, then keyword on the project. Purchasing the basic tools will ensure that you don’t have to buy any more material aside from the wood ply.

Time and Instructions

Instructions are one of the principal things that each and every newcomer should follow. Instructions guide is quite simple to understand the process, what to do and the way to do it. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and therefore it is necessary for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which will help you to achieve success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success quickly. If you understand the objective of woodworking, the item that you need to build, the tools you require in order to possess and the average time you can devote daily; then you’re all set to go.

Conclusion, 12 X 12 Shed Plans Free

These tips and education will make the woodworking projects and plans for novices fast to complete. Always make sure that you have all of the vital tools, materials, space ready. Read the instructions for building an item handy. Proper strategy and planning will allow you to make a great woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking 12 X 12 Shed Plans Free

People when trying to find a way to pass time or want an alternative method to generate money they usually turn to a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be very cautious when choosing which project to begin with because there are projects that can be too tough for a newbie. But do not be concerned about that since we are going to give you guidelines on the ideal way to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your project you have to be aware of if you’ve got the available resources to work on such a job. Try not to invest a good deal of money on purchasing equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the artistic hand and the hands.

Starting Your First Woodworking Shop 12 X 12 Shed Plans Free

Woodworking in your home will give you time to research different projects and learn a lot of things. That’s why it’s very important to invest less money when starting out so that you can afford to make mistakes and at some time learning about different jobs.
It is extremely important that you know more about different kinds of wood available for making projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which kind of wood they use will help you prepare the wood you will need for certain jobs you might want to pursue.
Once you understand the basics of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your needs.

12 X 12 Shed Plans Free practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts using a variety of tools so that you can find the hang of working with the tools. When starting out you can make a range of errors but with time you will find out how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop 12 X 12 Shed Plans Free

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A little home workshop may produce a broad array of simple projects which will allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you’ll perform your woodworking, based on the size of your house, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the noise level. You can work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This might help decrease the problems of dust and noise, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking 12 X 12 Shed Plans Free

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. 12 X 12 Shed Plans Free if you can have a dedicated spot for a workshop all the greater. Floor gear and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment could be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. At the start, set up a bench area where you are able to shop and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf beneath the seat to house your hands power tools and a pegboard above the seat to hang other gear. Install a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, 12 X 12 Shed Plans Free

The scope of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools at your regional building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. You will find plenty of quality lightly used tools out there that belong to people who embarked on that one molding project around the home or obtained tools as gifts which they won’t ever use. You can usually buy tools for these sellers for under half of the original price and save even more money should you create a package deal for all their unused equipment. Of course, getting tools from private people will take extra time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a few added dollars on a inexpensive piece of equipment. The excess cost of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand gear yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to elevated sound levels. These can include earplugs or complete ear keyword muff protectors. I find a quality pair of ear muff guards is ideal for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw following the popular name, this may prove to be the most flexible tool in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be employed to build an whole property. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next job. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut curves. It’s ideal for cutting holes in timber also like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not need in your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents occur. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you might find that your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in wood bits. {Start with a typical amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a set of the longest clamps which you can spend. You may contact them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I prefer to utilize soft pine in my vices that won’t crush or damage lots of the various woods that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a fantastic quality name brand tape measure with a wide tape typically from the 25-foot selection. Even though in your store you might not use the tape at these spans, the bigger tape steps offer more rigid tapes which won’t flop around and slip off the ending of planks. Assessing when you are on your own will be a lot simpler, and of course, quality tape measures can endure for many years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the ideal angles as well as chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The cost of glue through all your jobs is a minor cost consideration. Therefore, it makes sense to go with the best. I also have discovered over time that I get the best results with both indoor and outdoor jobs when I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, 12 X 12 Shed Plans Free

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most basic equipment and tools, everyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Lockheed A-12

The Lockheed A-12 was a reconnaissance aircraft built for the United States Central Intelligence Agency (CIA) by Lockheed's Skunk Works, based on the designs of Clarence "Kelly" Johnson. The aircraft was designated A-12, the 12th in a series of internal design efforts for "Archangel", the aircraft's internal code name. In 1959 it was selected over Convair's FISH and Kingfish designs as the winner of Project GUSTO, and was developed and operated under Project Oxcart.

The CIA's representatives initially favored Convair's design for its smaller radar cross-section, but the A-12's specifications were slightly better and its projected cost was much lower. The companies' respective track records proved decisive. Convair's work on the B-58 had been plagued with delays and cost overruns, whereas Lockheed had produced the U-2 on time and under budget. In addition, Lockheed had experience running a "black" project.[1]

The A-12 was produced from 1962 to 1964 and flew from 1963 to 1968. It was the precursor to the twin-seat U.S. Air Force YF-12 prototype interceptor, M-21 launcher for the D-21 drone, and the SR-71 Blackbird, a slightly longer variant able to carry a heavier fuel and camera load. The A-12 began flying missions in 1967 and its final mission was in May 1968; the program and aircraft were retired in June. The program was officially revealed in the mid-1990s.[2]

Video: Woodworking Projects