All Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking when they’re after because most of the thoughts and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still appear unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are in fact many things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the ideas and jobs in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s easy step by step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any project of their choice within this package quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available across the net. Ted has done his best to guide them in every possible way he could, through simple to comprehend textual instructions, clear images and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and much more woodworking power tools , but the concept is to purchase the essential hand and power tools that beginners will need. You may always add to your toolbox as you gain experience!

All Wood Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the authors in woodworking magazines do a story on the best way to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop All Wood Projects

If you are just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking could be fun. If you don’t have the proper information, education, and ability, you might land up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Making something new with your hands is a special sense. Don’t start a project if you’re not interested, because this might land you in a bad location.

2. Think of the main reason for creating this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and analyze the time that you have, until you start with a job.

4. Start projects which you can complete. If you’re in the midst of some work, then it’s wise not to begin any project in any way.

Finding Woodworking Projects and Plans for Beginners All Wood Projects

If you maintain these essential things in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking projects you wish to start with. As a newcomer, always select a job that has a very basic build up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed into the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so you have a better comprehension of working with woods and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, All Wood Projects

Tools are the ways whereby you will win the battle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available on the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You can also buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you at a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking projects. Based on the type of project you would like to complete, pricing could be determined. The simple the job, the less cost it involves. However, at the very beginning purchasing the tools will be a little hefty. Because of this, it is better to fix a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Instructions are among the principal things which every beginner should follow. Instructions manual is quite easy to understand the procedure, what to do and the way to do it. It keyword is a systematic manual for finishing the job. Time also plays a significant part in the construction of woodworking projects. Woodworking projects require time and so it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword that will help you to achieve success is proper preparation. With proper planning and a strategy, it is possible to achieve success quickly. If you understand the purpose of woodworking, the item you need to construct, the tools you require in order to possess and the average time it’s possible to give daily; then you are all set to go.

Conclusion, All Wood Projects

These tips and education will create the woodworking projects and strategies for beginners fast to finish. Always make sure that you have all of the essential tools, materials, space prepared. Keep the instructions for building a product handy. Appropriate strategy and planning can help you to earn a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners All Wood Projects

People when trying to find a way to pass time or want an alternate method to make money they usually turn to a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be quite careful when choosing which job to start out with since you will find jobs which may be too difficult for a newbie. But don’t worry about that because we are going to give you tips on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you choose your project you need to know if you have the available resources to work on that project. Try not to spend a good deal of money on purchasing gear when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand and the hands.

How to Become a Master Woodworker From Your Own Home All Wood Projects

Woodworking at home will give you time to explore different projects and find out a lot of things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at any time learning about different projects.
It is very important that you know about different types of wood available for making jobs. Expect carpenters utilize several types of wood quality for decorating pieces, learning which kind of wood they use can help you prepare the wood you’ll need for specific projects you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good jobs to satisfy your needs.

All Wood Projects practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts utilizing various tools so you can get the hang of working with the tools. When starting out you may make a range of errors but with time you will find out how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home All Wood Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop may produce a wide variety of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you’ll do your woodworking, based on the size of your home, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to prepare your very first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking All Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. All Wood Projects if you can have a dedicated place for a workshop all the better. Floor tools and bench top gear can stay in position from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. At the start, establish a seat area where you are able to shop and use most of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to house your hand power tools and a pegboard above the bench to hang additional gear. Put in a woodworking at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, All Wood Projects

The reach of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in your regional building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative local ads. There are an abundance of quality gently used programs out there which belong to people who stumbled on that one molding project around the house or received tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for under half the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenses. Weigh out the advantages of traveling around town to save a few added dollars on a inexpensive piece of gear. The excess expense of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet generated sophisticated and complex pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you had.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to high noise levels. These can contain earplugs or complete ear keyword muff protectors. I find a excellent set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a very simple ball cap with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can end up being the most versatile tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be used to build an whole property. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After selecting the right saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut curves. It’s ideal for cutting holes in timber too like handle slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want in your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning every drill piece to its potential slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries occur. Although the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you’ll find your palm sander using just a bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in wood bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually requires the beginner woodworker a few years to collect a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you could spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws without dull handle turning. The wood beamed surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices which won’t crush or damage many of the different forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your shop you may not use the tape in these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you’re on your own will be a great deal simpler, and naturally, quality tape measures can last for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I discover the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The expense of adhesive through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the very best. I also have found over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, All Wood Projects

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Evan Rachel Wood

Evan Rachel Wood[1] (born September 7, 1987)[2] is an American actress, model, and musician. She began acting in the 1990s, appearing in several television series, including American Gothic (1995–96) and Once and Again (1999–2002). Wood made her debut as a leading film actress at the age of eleven in Digging to China (1998) and garnered acclaim for her Golden Globe-nominated role as the troubled teenager Tracy Freeland in the teen drama film Thirteen (2003).[3]

Wood continued acting mostly in independent films, including Pretty Persuasion (2005), Down in the Valley (2005), Running with Scissors (2006), and in the big studio production Across the Universe (2007). Since 2008, Wood has appeared in more mainstream films, including The Wrestler (2008), Whatever Works (2009) and The Ides of March (2011). She also returned to television, playing the supporting role of Queen Sophie-Anne on True Blood from 2009 to 2011 and playing the daughter of Mildred Pierce in the HBO miniseries Mildred Pierce (2011), for which she was nominated for the Golden Globe and Emmy Award for Best Supporting Actress. As of 2016[update], she plays the sentient android Dolores Abernathy in the HBO series Westworld, for which she won a Critics' Choice Award and earned a Golden Globe and Emmy Award nominations.

Wood was born in Raleigh, North Carolina. Her mother, Sara Lynn Moore, is an actress, director, and acting coach, who converted to Judaism.[4][5] Her father, Ira David Wood III, is a locally prominent actor, singer, theater director, playwright, and from a Christian family; he is the Executive Director of a local regional theatre company called Theatre in the Park.[6][7] Wood's brother, Ira David Wood IV, is also an actor; she has two other brothers, Dana and Thomas, and a sister named Aden. Her paternal aunt, Carol Winstead Wood, was a Hollywood production designer.[8]

Video: Woodworking Tools