American Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re following because all the ideas and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the ideal choice. There are actually lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are only getting started will find the thoughts and projects in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any project of their choice in this package quite readily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Yet, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual directions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that novices will need. You may always increase your toolbox as you gain experience!

American Woodworking Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Every month the authors in woodworking publications do a story on how best to improve your woodworking craft. When it’s showing you how to apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home American Woodworking Plans

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking could be interesting. If you don’t have the right information, instruction, and ability, you might land up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a particular sense. Don’t begin a project if you’re not interested, as this may land you at a bad location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start jobs that you can finish. If you are in the midst of some work, then it’s better not to start any project in any way.

Starting Your First Woodworking Shop American Woodworking Plans

If you keep those vital things in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you want to start with. As a beginner, always select a project which has a very basic construct up or a simple construction. Some easy to begin projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always move to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, American Woodworking Plans

Tools are the ways whereby you will win the struggle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You can also purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for novices, but using it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed cost on woodworking jobs. Based on the type of job that you would like to complete, pricing could be determined. The easy the project, the less price it involves. But at the beginning purchasing the tools will probably be a little hefty. Therefore, it is better to fix a budget on the tools, then keyword on the project. Buying the basic tools will make certain you do not have to purchase any more material other than the timber ply.

Time and Instructions

Instructions are one of the primary things which each and every newcomer should follow. Instructions manual is very simple to understand the procedure, what to do and the way to do it. Time also has an important part in the building of woodworking jobs. Woodworking projects require time and so it’s necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword that will allow you to reach success is proper planning. With proper planning and a plan, it is possible to achieve success immediately. If you know the objective of woodworking, the thing that you need to construct, the resources you need in order to possess and the average time you can devote every day; then you are all set to go.

Conclusion, American Woodworking Plans

All these strategies and education is likely to create the woodworking projects and strategies for beginners fast to finish. Always ensure you have all of the vital tools, materials, space prepared. Keep the instructions for constructing a product handy. Appropriate strategy and planning can help you to make a great woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking American Woodworking Plans

Folks if you’re looking for a way to pass time or desire an alternative way to make money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be quite cautious when choosing which job to start out with since you will find jobs that may be too tough for a beginner. But do not be concerned about that because we are going to give you guidelines on the right way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you choose your project you need to be aware of whether you’ve got the available resources to work on that job. Try not to spend a lot of cash on buying gear when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the hands.

The Benefits of Woodworking American Woodworking Plans

Woodworking at home will provide you time to research different jobs and find out a lot of things. That is why it’s very important to invest less money when starting out so that you can manage to make mistakes and at some time learning about various jobs.
It’s extremely important that you know more about the different types of wood available for making jobs. Expect carpenters utilize different types of wood quality for decorating pieces, learning which type of wood they use can allow you to prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

American Woodworking Plans practice makes perfect so be sure you practice your work every day if possible. Try out a lot of designs utilizing a variety of tools so that you can find the hang of using the tools. When starting out you may earn a range of errors but with time you will learn how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking American Woodworking Plans

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum amount of gear and equipment. A little home workshop can generate a broad array of simple projects which can help you develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you will do your woodworking, based on the dimensions of your home, you might be able to produce a dedicated space to your woodworking activities. This might be a reserved spot in your garage or on your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the remainder of the household. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and noise, however based on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking American Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. American Woodworking Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If possible plan for inevitable expansion as you get more tools and equipment. At the beginning, establish a seat area where you are able to store and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard above the seat to hang other equipment. Install a woodworking vice at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, American Woodworking Plans

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools at your regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find an abundance of quality lightly used programs out there that belong to people who stumbled on that one molding job around the house or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for less than half of the original cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple added dollars on a inexpensive piece of gear. The extra expense of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand equipment yet generated sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uneasy.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to elevated sound levels. These can include earplugs or complete ear keyword muff protectors. I find that a excellent set of ear muff protectors is perfect for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this can end up being the most versatile instrument in a start-up workshop. In reality, in the hands of an expert, a power hand saw can be employed to build an entire property. At some point, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your second project. After selecting the right saw put in an excellent blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and install a quality blade with carbide teeth. Start with a hybrid . These possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut curves. It is perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Through tough lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life will be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you don’t want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Although the most frequent, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander using a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll find that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in timber bits. {Start with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps which you could afford. You may get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your bench is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enable the user to quickly open and close the limbs with no dull handle turning. The wood beamed surfaces in your vice will periodically need replacement. I would rather use soft walnut in my vices that will not crush or damage lots of the different forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among the most often used tools. Purchase a good excellent name brand tape measure with a broad tape typically from the 25-foot range. Even though in your shop you might not use the tape in these spans, the larger tape steps offer more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you’re by yourself will be a great deal easier, and naturally, quality tape steps can endure for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are made equal. Avoid cheap home brands sold as carpenter’s glue. The cost of glue through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the best. I have also found over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, American Woodworking Plans

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools