Anne Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right option. There are in fact many things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those that are only getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice in this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overrun considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that can be found across the net. Ted has done his best to direct them in every conceivable way he could, through easy to comprehend textual instructions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it is certainly worth buying!

How to Become a Master Woodworker From Your Own Home Anne Furniture Plans

Woodworking is 1 hobby that can also be a rewarding career if you love to work with your hands and construct beautiful pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you’ll be able to build all types of furniture, (table, beds, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Anne Furniture Plans.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will have the ability to build some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living room. It will be a topic of conversation whenever you have friends come over to visit. They’ll ask: How can you create it? Where did you get the woodworking plans? How long can it take to finish the job? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Anne Furniture Plans

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Anne Furniture Plans.

Start with a concept in mind of what you would like to construct and then get a really good woodworking project plan that is geared toward novices. There are numerous little woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can start out with as grand a woodworking program as you choose. However, the odds are if you start out with a little woodworking job initially, you will have a better chance of keyword finishing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and variety of wood needed, and the required hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to complete your immediate or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t affordable. The newcomer needs good woodworking tools, but it is simple to break the bank buying a lot of tools you may not utilize all that frequently. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t forget that the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry place to work and may need a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Anne Furniture Plans Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way to increase your woodworking craft. Whether it is showing you the way you can apply an end to a completed project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Anne Furniture Plans

If you’re just beginning and very interested in doing a DIY job for home afterward, woodworking can be interesting. If you don’t have the proper information, instruction, and skill, you may wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you are not interested, as this may land you at a terrible location.

2. Consider the main reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and analyze the time that you have, before you begin with a job.

4. Start projects that you can finish. If you’re in the midst of a work, then it is wise not to start any project in any way.

The Benefits of Woodworking Anne Furniture Plans

If you maintain those vital things in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects that you want to start with. As a newcomer, always select a project which has quite a basic build up or a simple construction. A few simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you could always move to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their tools. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Anne Furniture Plans

Tools would be the means whereby you can win the struggle of woodworking. Many men and women believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, always assess the balance between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there in the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for novices, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking projects. Dependent on the type of project that you would like to complete, pricing could be set. The easy the job, the less cost it involves. But at the beginning buying the tools will probably be somewhat hefty. Therefore, it is much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Directions

Directions are among the principal things that every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and how to get it done. It keyword is a systematic manual for finishing the project. Time also has an important part in the construction of woodworking projects. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which can allow you to achieve success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the item you want to construct, the tools you need to possess and the average time you can devote every day; then you’re ready to go.

Conclusion, Anne Furniture Plans

All these strategies and education will make the woodworking projects and strategies for beginners quickly to complete. Always ensure that you have all the essential tools, materials, space ready. Read the instructions for constructing an item handy. Proper strategy and preparation will allow you to earn a great woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Anne Furniture Plans

People when looking for a way to pass time or want an alternative method to make money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of projects one can consider. When starting out you need to be quite careful when choosing which job to begin with since you will find projects which can be too tough for a newbie. But don’t be concerned about that since we will give you tips on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, so before you choose your job you have to know if you have the available tools to work on that project. Try not to invest a lot of cash on buying gear when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand and the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Anne Furniture Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to explore unique jobs and learn so many things. That’s why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about various jobs.
It is extremely important you know more about the different kinds of wood available for creating jobs. Expect carpenters use several types of wood quality for decorating pieces, learning what kind of wood that they use will allow you to prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you know the basics of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

Anne Furniture Plans practice makes perfect so make sure that you practice your work every day if possible. Try out lots of layouts using various tools so you can find the hang of using the tools. When starting out you can make a number of mistakes but with time you will find out how to properly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Anne Furniture Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A small home workshop may produce a wide array of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will do your woodworking, Depending on the dimensions of your house, you might be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw up dust into the top levels of the home. Another advantage of detached workshops is, clearly, the noise level. You can work without bothering the rest of the family. A fantastic compromise might be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Anne Furniture Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to function in. Anne Furniture Plans if you can have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in place from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. At the beginning, set up a seat area where you are able to store and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the bench to house your hand power tools along with a pegboard above the bench to hang additional equipment. Put in a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Anne Furniture Plans

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools at your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. You will find plenty of quality lightly used tools out there which belong to people who stumbled on that 1 molding project around the home or obtained tools as presents which they will never use. You can usually buy tools for these sellers for less than half of the initial cost and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private people will take extra time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple added dollars on a inexpensive piece of equipment. The excess cost of travel and time in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this can end up being the most versatile instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to build an entire house. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next job. After choosing the proper saw install a quality blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut curves. It is perfect for cutting holes in wood also like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that buying quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you don’t want on your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover that your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally requires the novice woodworker a few years to accumulate a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps which you can spend. You can contact them for smaller adhesive jobs and expand them to their full length for larger projects.

Shop Vice: A shop vice installed in the end of the bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the jaws without tedious handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I would rather utilize soft pine in my vices that won’t crush or damage many of the different forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be one of the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you may not be using the tape in these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Assessing when you are on your own will be a great deal simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will help you in marking the right angles in addition to compound angles. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The expense of glue through all of your jobs is a minor cost consideration. For that reason, it makes sense to decide on the very best. I also have discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Anne Furniture Plans

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Anne, Queen of Great Britain

Anne (6 February 1665 – 1 August 1714)[a] was the Queen of England, Scotland and Ireland between 8 March 1702 and 1 May 1707. On 1 May 1707, under the Acts of Union, two of her realms, the kingdoms of England and Scotland, united as a single sovereign state known as Great Britain. She continued to reign as Queen of Great Britain and Ireland until her death in 1714.

Anne was born in the reign of her uncle Charles II, who had no legitimate children. Her father, Charles's younger brother James, was thus heir presumptive to the throne. His suspected Roman Catholicism was unpopular in England, and on Charles's instructions Anne and her elder sister, Mary, were raised as Anglicans. On Charles's death in 1685, James succeeded to the throne, but just three years later he was deposed in the Glorious Revolution of 1688. Mary and her husband, the Dutch Protestant William III of Orange (a cousin to Anne and Mary), became joint monarchs. Although the sisters had been close, disagreements over Anne's finances, status and choice of acquaintances arose shortly after Mary's accession and they became estranged. William and Mary had no children. After Mary's death in 1694, William reigned alone until his own death in 1702, when Anne succeeded him.

During her reign, Anne favoured moderate Tory politicians, who were more likely to share her Anglican religious views than their opponents, the Whigs. The Whigs grew more powerful during the course of the War of the Spanish Succession, until 1710 when Anne dismissed many of them from office. Her close friendship with Sarah Churchill, Duchess of Marlborough, turned sour as the result of political differences. The Duchess took revenge in an unflattering description of the Queen in her memoirs, which was widely accepted by historians until Anne was re-assessed in the late 20th century.

Video: Woodworking Tools