Armoire Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re after because most of the thoughts and projects Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to locate any project of their choice in this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it’ll be endorsed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Yet, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available across the net. Ted has done his best to direct them in every possible way he could, through simple to understand textual directions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it’s certainly worth buying!

Starting Your First Woodworking Shop Armoire Furniture Plans

Woodworking is 1 hobby that could also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Armoire Furniture Plans.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It will be a subject of conversation when you have friends come over to visit. They’ll ask: How can you make it? How long can it take to finish the job? What kind of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you discuss your job, a sense of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Armoire Furniture Plans

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Armoire Furniture Plans.

Start with an idea in mind of what you want to construct and then get a really good woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for novices available for sale from online woodworking merchants. A couple of woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Of course, you can start out with as grand a woodworking plan as you choose. However, the chances are if you start out using a little woodworking project initially, you’ll have a better chance of keyword completing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and variety of wood needed, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you want to complete your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you might not utilize all that often. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood glue! Obviously, you will need a dry place to work and may require a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that beginners will need. You may always increase your toolbox as you gain experience!

Armoire Furniture Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the authors in woodworking magazines do a story on how to improve your woodworking craft. Whether it’s showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Armoire Furniture Plans

If you are just beginning and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you don’t have the right information, instruction, and ability, you may wind up spending more time and money than you originally intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a couple of essential factors you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Don’t start a project if you are not interested, because this might land you in a bad location.

2. Think of the main reason behind making this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and examine the time you have, until you start with a job.

4. Start jobs that you’re able to complete. If you’re in the midst of some work, then it’s better not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Armoire Furniture Plans

If you maintain those vital points in your mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you wish to begin with. As a beginner, always select a job which has a very basic construct up or a very simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you can always proceed into the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Armoire Furniture Plans

Tools are the ways whereby you can win the struggle of woodworking. Many men and women believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available in the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you in advance woodworking. You can also buy keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for beginners, but having it might make work simpler for you in a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking projects. Dependent on the sort of job that you want to finish, pricing could be set. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will probably be a little hefty. Therefore, it is better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material other than the timber ply.

Time and Directions

Instructions are among the primary things which every newcomer should follow. Instructions manual is quite easy to comprehend the process, what to do and how to get it done. Time also has an important role in the construction of woodworking projects. Woodworking projects require time and therefore it’s crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to achieve success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you know the purpose of woodworking, then the item that you need to construct, the resources you need to possess and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Armoire Furniture Plans

These strategies and education is likely to create the woodworking projects and plans for novices quickly to complete. Always make sure you have all the vital tools, materials, area ready. Keep the instructions for constructing an item handy. Proper strategy and preparation will allow you to make a great woodworking job for your property.

|

Starting Your First Woodworking Shop Armoire Furniture Plans

Folks if you’re trying to find a way to pass time or desire an alternate way to make money they generally turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be very cautious when choosing which project to begin with because you will find jobs which can be too difficult for a newbie. But don’t worry about that because we are going to provide you guidelines on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, so before you choose your project you have to know whether you have the available tools to work on such a project. Try not to spend a lot of money on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Armoire Furniture Plans

Woodworking at home will give you time to research unique jobs and learn a lot of things. That’s why it’s important to invest less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It is very important that you know about different kinds of wood available for creating jobs. Expect carpenters use different kinds of wood quality for decorating pieces, learning which kind of wood they use will allow you to prepare the wood you’ll need for specific jobs you might want to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Armoire Furniture Plans practice makes perfect so be sure that you practice your work daily if possible. Try out lots of designs using various tools so that you can find the hang of using the tools. When starting out you may earn a range of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Armoire Furniture Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad array of simple projects which can help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you will do your woodworking, based on the dimensions of your home, you might have the ability to create a dedicated space into your woodworking tasks. This may be a reserved place in your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the rest of the household. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Armoire Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Armoire Furniture Plans if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. At the start, set up a bench area where you can store and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf below the seat to house your hands power tools along with a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Armoire Furniture Plans

The reach of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools at the local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. There are an abundance of quality lightly used tools out there that belong to people who stumbled on that 1 molding project around the house or received tools as gifts that they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the initial cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and perhaps travel expenses. Weigh out the advantages of traveling around town to save a couple extra bucks on a cheap piece of gear. The extra cost of time and travel in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand equipment yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite brand name, this may end up being the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to construct an whole property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your second job. After choosing the right saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. These have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t just cut curves. It’s ideal for cutting holes in timber also like manage slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more flexible but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Through tough lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need on your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander using a bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a few years to accumulate a comprehensive set of timber clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure remains the same. Get a pair of the maximum clamps which you could afford. You can contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the consumer to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces on your vice will occasionally require replacement. I would rather use soft walnut in my vices that won’t crush or damage many of the various forests that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among your most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your shop you may not use the tape at these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slip off the end of planks. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape measures can last for many years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber.

What is Woodworking? Woodwork Crafts – The Beginners Guide To Woodworking Armoire Furniture Plans

Woodworking is known as the building or the production of items out of wood. It is possible to produce a lot of different objects from woodworking and these objects can be as big as gazebos or as small as wooden toys. However large or small your private project maybe you will be quite likely to do that aim with woodworking. Additionally, woodworking has many personal as well as emotional benefits! In this guide, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

Individuals who build things out of wood are usually known keyword as carpenters. Carpenters can work on a number of woodworking jobs and occupation types. For example, some carpenters possess their carpentry business and these folks have the luxury to place their job hours. This advantage allows carpenters the opportunity to spend more time with their families and also have less job strain. Raising kids is a very tough task no matter what way you approach the task! For a carpenter who owns his or her own business, this task might not be as hard because that person will have more time to be a part of her or his child’s life. By playing a bigger part in the life of your child you will be having a greater influence on the sort of character that child develops into, which is a huge concern for any loving parent. In addition to these benefits, carpentry may also have health benefits too.

The Benefits of Woodworking Armoire Furniture Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This causes more physical activity, which leads to better physical health. Keeping your body physically healthy is really important and keyword can help prevent the incidence of various illnesses later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and lower the chances of having a range of other disorders.

Armoire Furniture Plans, Do It Yourself Woodworking Saves Cash:

I always feel as that I paid way too far when I visit home improvement stores and purchase patio furniture, and I am certain that I’m not the only person that has felt this way! A successful small business owner once advised me to constantly increase the sales price of a product to double everything you’ve got it for. This way, you can always reduce the product to 50 percent off and come out without acquiring any losses. This sounds like it might be exactly the same strategy that home improvement shops use in selling their wooden furniture products. Regardless, there’s a way which it is possible to get around paying the extra money and that’s to do with building it yourself. Luckily, there are several really excellent woodworking products offering thousands of detailed woodworking keyword strategies for countless different job types. So, you really can build anything you need or see in almost any home improvement store. Doing something yourself does take a bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

List of furniture types

This is a list of furniture types. Furniture includes objects such as tables, chairs, beds, desks, backpacks, dressers, cupboards or electronic devices (video game consoles, computers, TV, etc.). These objects are usually kept in a house or other building to make it suitable or comfortable for living or working in.

Video: Woodworking Projects