Baby Crib Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are after because most of the thoughts and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are actually lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People who are only getting started will discover the ideas and jobs in Ted’s package quite easy. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any project of their choice within this package quite readily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it will be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to guide them in every possible way he could, through easy to understand textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You can always increase your toolbox as you get experience!

Baby Crib Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the authors in woodworking magazines do a story about the best way best to improve your woodworking craft. Whether it is showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Baby Crib Woodworking Plans

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking can be interesting. If you do not have the proper information, instruction, and ability, you may land up spending more time and money than you initially intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Creating something new with your own hands is a special feeling. Do not start a project if you are not interested, as this may land you at a terrible location.

2. Think of the main reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, until you begin with a project.

4. Start jobs that you’re able to complete. If you are in the midst of a work, then it is wise to not start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Baby Crib Woodworking Plans

If you keep these vital things in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to start with. As a beginner, always select a project which has a very basic construct up or a very simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Baby Crib Woodworking Plans

Tools are the means whereby you will win the struggle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available on the marketplace. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you in advance woodworking. You might also purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it would make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills will make the task much easy.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Based on the type of job that you want to finish, pricing can be set. The simple the job, the less price it involves. But at the very beginning buying the tools will probably be a little hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you don’t need to purchase any more material aside from the timber ply.

Time and Directions

Directions are one of the principal things which each and every newcomer should follow. Instructions manual is quite simple to comprehend the process, what to do and the way to do it. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and so it’s necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to achieve success is proper preparation. With appropriate planning and a strategy, it is likely to achieve success immediately. If you understand the purpose of woodworking, the item that you need to construct, the resources you need in order to own and the average time it’s possible to devote daily; then you’re ready to go.

Conclusion, Baby Crib Woodworking Plans

These strategies and instruction will create the woodworking projects and plans for beginners quickly to finish. Always ensure you have all of the vital tools, materials, area prepared. Read the instructions for constructing a product handy. Proper strategy and preparation can help you to make a fantastic woodworking job for your home.

|

The Benefits of Woodworking Baby Crib Woodworking Plans

People when looking for a way to pass time or desire an alternate method to make money they usually turn into a hobby they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which project to begin with because you will find jobs that may be too difficult for a beginner. But don’t be concerned about that because we will give you tips on the right means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to be aware of whether you have the available tools to work on that project. Try not to spend a lot of cash on purchasing gear when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Baby Crib Woodworking Plans

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking in your home will give you time to research different projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so that you can manage to make errors and at some time learning about various jobs.
It’s extremely important that you know more about different types of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating bits, learning which kind of wood they use can help you prepare the wood you will need for specific projects you might want to pursue.
As soon as you understand the basics of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to satisfy your wants.

Baby Crib Woodworking Plans practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of designs using various tools so you may get the hang of working with the tools. When starting out you may earn a range of errors but with time you will find out how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Baby Crib Woodworking Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum amount of tools and equipment. A little home workshop may produce a wide variety of simple projects that will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your home, you may be able to create a dedicated space into your woodworking tasks. This might be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably create dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. You can work without disturbing the rest of the family. A good compromise could be the garage of your home.

This can help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Baby Crib Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Baby Crib Woodworking Plans if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in place from project to project. If this setup is not hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the start, set up a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will enable you to work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools and a pegboard above the seat to hang other equipment. Put in a woodworking vice at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Baby Crib Woodworking Plans

The reach of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, purchase your quality tools at the local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. There are plenty of quality gently used programs out there that belong to individuals who embarked on that one molding project around the home or received tools as gifts which they will never use. You can usually buy tools for all these sellers for less than half of the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a few extra bucks on a inexpensive piece of gear. The excess cost of time and travel in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated sound levels. Last, put on a cap to keep the dust from your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this may end up being the most versatile instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw could be employed to construct an entire house. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your second project. After choosing the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut corners. It is ideal for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch version. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Although the most ordinary, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander using a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a standard number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you can afford. You can contact them for smaller adhesive jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the consumer to quickly open and close the limbs with no tedious handle turning. The timber clamping surfaces on your vice will occasionally require replacement. I prefer to utilize soft pine in my vices that will not crush or damage lots of the different forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you may not be using the tape at these lengths, the larger tape steps provide more rigid tapes which won’t flop around and slip off the ending of boards. Assessing when you are on your own will be a great deal simpler, and naturally, quality tape measures can endure for many decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes on the way.

Adhesives: Not many glues are created equal. Avoid inexpensive house brands marketed as carpenter’s glue. The expense of glue through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the best. I have also discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Baby Crib Woodworking Plans

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most basic equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of words having different meanings in American and British English (A–L)

Note: the below are general references on this topic. Individual entries have not yet been audited against the references below and readers looking for verifiable information should consult the works below unless individual entries in the article's table are properly sourced.

Video: Woodworking Projects