Baby Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re following because all the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the right choice. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. People that are just getting started will discover the thoughts and projects in Ted’s package quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who buy it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available across the internet. Ted has done his very best to direct them in every possible way he can, through easy to comprehend textual directions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Baby Furniture Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the writers in woodworking publications do a story about the best way to increase your woodworking craft. When it is showing you the way you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Baby Furniture Plans

If you are a beginner and very enthusiastic about doing a DIY job for house afterward, woodworking could be fun. If you do not have the right information, education, and skill, you might wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a few essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Making something new with your hands is a particular sense. Don’t start a project if you’re not interested, because this might land you in a bad place.

2. Consider the main reason for making this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and examine the time you have, until you start with a project.

4. Start projects that you’re able to finish. If you are in the midst of a work, then it is better not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Baby Furniture Plans

If you maintain these vital things in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking projects that you wish to begin with. As a newcomer, always pick a job that has quite a basic build up or a very simple structure. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you could always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Baby Furniture Plans

Tools are the means whereby you can win the battle of woodworking. Many men and women think that power tools are requires. But for novices, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much simple for you. When you buy a hammer, constantly check the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You might also purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but having it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and basic tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed price on woodworking projects. Dependent on the sort of project you would like to finish, pricing could be set. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s much better to resolve a budget on the tools, then keyword on the project. Purchasing the basic tools will ensure that you do not have to purchase any more material aside from the wood ply.

Time and Directions

Directions are among the principal things which each and every beginner should follow. Instructions manual is very easy to understand the process, what to do and how to do it. Time also plays a significant part in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which will help you to reach success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success immediately. If you understand the objective of woodworking, the thing that you want to construct, the resources you need in order to own and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Baby Furniture Plans

These strategies and education is likely to make the woodworking projects and plans for beginners fast to finish. Always make sure you have all the vital tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and preparation will help you to make a fantastic woodworking job for your home.

|

Starting Your First Woodworking Shop Baby Furniture Plans

Folks when looking for a way to pass time or want an alternate method to generate money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which project to begin with because you will find projects which can be too tough for a newbie. But do not worry about that since we are going to give you guidelines on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you pick your job you have to know whether you have the available tools to work on that job. Try not to spend a good deal of cash on buying equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand and the hands.

The Benefits of Woodworking Baby Furniture Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to explore different projects and find out so many things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at some time learning about different projects.
It is extremely important you know more about different types of wood available for creating jobs. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning which kind of wood they use will help you prepare the wood you will need for certain projects you may choose to pursue.
As soon as you know the basics of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do can help you in creating good projects to fulfill your needs.

Baby Furniture Plans practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of layouts using a variety of tools so that you may get the hang of working with the tools. When starting out you may make a number of mistakes but with time you will find out how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Baby Furniture Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal number of gear and equipment. A little home workshop may generate a wide array of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you will do your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved spot on your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust which travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the top levels of the house. Another benefit of detached workshops is, of course, the sound level. You can work without bothering the rest of the family. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Baby Furniture Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Baby Furniture Plans if you can have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. In the beginning, establish a bench area where you can store and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to home your hand power tools and a pegboard above the bench to hang other gear. Install a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Baby Furniture Plans

The scope of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in the regional construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. You will find an abundance of quality gently used programs out there which belong to people who stumbled on that 1 molding job around the house or received tools as presents which they won’t ever use. You can usually buy tools for all these sellers for less than half of the initial price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple added bucks on a inexpensive piece of gear. The excess expense of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand equipment yet generated sophisticated and intricate bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this may end up being the most flexible instrument in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be employed to construct an entire property. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After selecting the right saw install a quality blade. Most skill saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut curves. It’s perfect for cutting holes in timber also like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want in your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll find your palm sander with a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber bits. {Start with a typical number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually requires the beginner woodworker a few years to collect a detailed set of wood clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you can afford. You may get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the jaws with no dull handle turning. The wood beamed surfaces on your vice will occasionally require replacement. I would rather utilize soft pine in my vices which won’t crush or damage many of the various woods that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Buy a fantastic quality name brand tape measure with a wide tape usually in the 25-foot selection. Although in your shop you may not be using the tape at these spans, the bigger tape steps offer more rigid tapes that won’t flop around and slide off the ending of planks. Measuring when you’re by yourself will be a lot easier, and of course, quality tape steps can endure for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles as well as chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The expense of glue through all of your projects is a minor cost consideration. Therefore, it makes sense to go with the very best. I have also found over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Baby Furniture Plans

The peaceful gratification of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Mamas & Papas

Mamas & Papas is a UK-based nursery brand and manufacturer supplying prams, pushchairs, baby products, furniture and maternity wear. It was established in Huddersfield in 1981 by David and Luisa Scacchetti, both of Italian ancestry, whose initial aim was to bring Italian design to the UK baby buggy market. They started the business with a range of coloured corduroy prams imported from Italy.[1] They sold through one local shop of their own and through supplying other stores, until deciding to become a retail brand in 1998.[2] For most of its existence, the business was privately owned.[3]

By 2011, Mamas & Papas was described as the "UK's bestselling nursery brand".[4] At this time they were expanding the number of their overseas outlets.[5] In 2014, the business embarked on cost-cutting associated with a Company Voluntary Arrangement (CVA).[6] Store closures were considered [7] but were avoided by the CVA.[8]

The private equity firm BlueGem Capital Partners took a majority share in Mamas & Papas in the summer of 2014, joining a portfolio that includes Liberty and Jack Wills. [9] The company returned to profitability in 2015.[10]

Video: Woodworking Tools