Barn Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re following because most of the ideas and projects Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will find it really easy to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice in this package quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it’ll be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Barn Shed Plans

Woodworking is one hobby that could also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Barn Shed Plans.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll be able to build some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation when you have friends come over to see. They will ask: How can you make it? Where did you get the woodworking plans? How long did it take to finish the job? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your work, a feeling of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Barn Shed Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Barn Shed Plans.

Begin with a concept in your mind of what you want to build and then get a really good woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. Of course, you can begin with as expansive a woodworking program as you choose. On the other hand, the chances are if you start out with a little woodworking project initially, you will have a better chance of keyword finishing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and type of wood needed, and the required hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Only buy what you want to complete your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking tools, but you can easily break the bank buying a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry place to work and may require a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Barn Shed Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Every month the authors in woodworking publications do a story on the best way to improve your woodworking craft. When it’s showing you the way you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Barn Shed Plans

If you’re a beginner and very enthusiastic about doing a DIY job for home then, woodworking could be interesting. If you do not have the proper information, education, and ability, you may wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not begin a project if you’re not interested, as this may land you at a bad location.

2. Consider the main reason for creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a job.

4. Start jobs that you’re able to complete. If you’re in the midst of a work, then it is wise not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Barn Shed Plans

If you maintain these vital things in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you want to begin with. As a beginner, always pick a job which has quite a basic construct up or a simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Barn Shed Plans

Tools are the means through which you will win the battle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws out there in the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for novices, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking jobs. Dependent on the sort of project you would like to finish, pricing could be determined. The simple the project, the less price it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s better to fix a budget first on the resources, then keyword on the project. Buying the fundamental tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Directions

Instructions are one of the primary things that each and every newcomer should follow. Instructions guide is quite simple to understand the procedure, what to do and how to do it. It keyword is a systematic guide for completing the project. Time also plays a significant part in the building of woodworking jobs. Woodworking projects demand time and so it’s necessary for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that can help you to reach success is proper planning. With proper planning and a strategy, it is possible to achieve success immediately. If you understand the objective of woodworking, then the thing you want to build, the tools you require in order to possess and the average time it’s possible to devote daily; then you are all set to go.

Conclusion, Barn Shed Plans

These strategies and education is likely to create the woodworking projects and plans for novices quickly to complete. Always make sure you have all the essential tools, materials, area prepared. Read the instructions for building an item handy. Proper strategy and preparation will help you to earn a great woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Barn Shed Plans

Folks if you’re trying to find a way to pass time or want an alternate way to make money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you need to be very careful when choosing which project to begin with because you will find jobs that may be too tough for a newbie. But don’t worry about that because we will provide you guidelines on the right way to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you choose your project you have to know if you have the available tools to work on such a job. Try not to invest a lot of cash on purchasing gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Barn Shed Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will give you time to research different jobs and learn so many things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is very important you know about different types of wood available for creating jobs. Anticipate carpenters use different kinds of wood quality for decorating bits, learning what type of wood they use can help you prepare the wood you will need for certain jobs you might choose to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Barn Shed Plans practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of designs utilizing a variety of tools so you can get the hang of using the tools. When starting out you may earn a range of errors but with time you will find out how to properly use them and produce quality projects.

|

The Benefits of Woodworking Barn Shed Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of gear and equipment. A small home workshop may generate a broad variety of simple projects that will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you’ll perform your woodworking, Depending on the dimensions of your house, you might be able to produce a dedicated space into your woodworking activities. This may be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the upper levels of the house. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however based on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Barn Shed Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Barn Shed Plans if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in place from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the beginning, establish a bench area where you are able to shop and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard over the seat to hang other equipment. Install a woodworking at one end of the seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Barn Shed Plans

The scope of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local ads. There are an abundance of quality lightly used programs out there that belong to individuals who embarked on that 1 molding job around the home or obtained tools as presents that they will never use. You can usually buy tools for all these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a couple extra dollars on a inexpensive piece of gear. The excess expense of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uneasy.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the popular brand name, this may end up being the most versatile instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw can be employed to build an entire house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next project. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid . These possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut corners. It’s perfect for cutting holes in wood too like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll find that your palm sander with just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a typical number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a couple of years to collect a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you can afford. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enable the consumer to quickly open and close the jaws with no dull handle turning. The wood beamed surfaces in your vice will periodically need replacement. I would rather utilize soft walnut in my vices which will not crush or damage lots of the different forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Buy a good excellent name brand tape measure with a broad tape usually in the 25-foot range. Although in your shop you may not use the tape at these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are by yourself will be a great deal easier, and naturally, quality tape measures can last for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will assist you in marking the ideal angles in addition to compound angles. Get the number three and two Robertson set. I find the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are created equal. Stay away from inexpensive house brands marketed as carpenter’s glue. The expense of glue through all your jobs is a little cost consideration. For that reason, it is sensible to go with the best. I also have found over time that I get the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Barn Shed Plans

The peaceful satisfaction of woodworking is an excellent experience in this era of hurried lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Barn

A barn is an agricultural building usually on farms and used for various purposes. In the North American area, a barn refers to structures that house livestock, including cattle and horses, as well as equipment and fodder, and often grain.[2] As a result, the term barn is often qualified e.g. tobacco barn, dairy barn, sheep barn, potato barn. In the British Isles, the term barn is restricted mainly to storage structures for unthreshed cereals and fodder, the terms byre or shippon being applied to cow shelters, whereas horses are kept in buildings known as stables.[2][3] On the Continent, however, barns were often part of integrated structures known as byre-dwellings (or housebarns in US literature). In addition, barns may be used for equipment storage, as a covered workplace, and for activities such as threshing.

The word barn comes from the Old English bere, for barley (or grain in general), and aern, for a storage place—thus, a storehouse for barley.[4] The word bere-ern, also spelled bern and bearn, is attested to at least sixty times in homilies and other Old English prose.[5] The related words bere-tun and bere-flor both meant threshing floor. Bere-tun also meant granary; the literal translation of bere-tun is "grain enclosure". While the only literary attestation of bere-hus (also granary) comes from the Dialogi of Gregory the Great, there are four known mentions of bere-tun and two of bere-flor. A Thesaurus of Old English lists bere-ærn and melu-hudern ("meal-store house") as synonyms for barn.[5][6][7]

The modern barn largely developed from the three aisled medieval barn, commonly known as tithe barn or monastic barn. This, in turn, originated in a 12th-century building tradition, also applied in halls and ecclesiastical buildings. In the 15th century several thousands of these huge barns were to be found in Western-Europe. In the course of time, its construction method was adopted by normal farms and it gradually spread to simpler buildings and other rural areas. As a rule, the aisled barn had large entrance doors and a passage corridor for loaded wagons. The storage floors between the central posts or in the aisles were known as bays or mows (from Middle French moye).[8]

Video: Woodworking Projects