Barn Style Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking when they’re after because most of the ideas and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are actually many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will be able to find any project of their choice in this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large size. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found across the internet. Ted has done his best to direct them in every conceivable way he can, through simple to understand textual instructions, clear images and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools here, but the idea is to buy the essential hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Barn Style Shed Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the authors in woodworking magazines do a story about the best way best to increase your woodworking craft. When it is showing you the way to apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Barn Style Shed Plans

If you’re just beginning and very interested in doing a DIY project for house afterward, woodworking could be fun. If you do not have the right information, instruction, and ability, you might wind up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a particular sense. Do not begin a job if you are not interested, because this might land you at a terrible place.

2. Think of the main reason for creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start projects which you’re able to finish. If you are in the midst of some work, then it’s wise not to begin any project in any way.

The Benefits of Woodworking Barn Style Shed Plans

If you keep those vital things in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you wish to start with. As a beginner, always select a job which has quite a basic build up or a simple structure. A few simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Barn Style Shed Plans

Tools are the ways whereby you will win the struggle of woodworking. A lot of people believe power tools are needs. But for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there on the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You might even purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for novices, but having it might make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking jobs. Dependent on the sort of project you want to finish, pricing could be determined. The simple the project, the less price it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it’s better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not need to buy any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things that every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to understand the procedure, what to do and how to do it. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and therefore it is crucial for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which can allow you to achieve success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you know the purpose of woodworking, the item you need to build, the tools you require to own and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Barn Style Shed Plans

All these tips and instruction will make the woodworking projects and plans for novices quickly to complete. Always ensure you have all the essential tools, materials, area prepared. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to earn a great woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Barn Style Shed Plans

Folks if you’re looking for a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which job to start out with since there are jobs which may be too difficult for a newbie. But do not worry about that because we are going to give you guidelines on the right means to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to know whether you’ve got the available tools to work on such a project. Try not to invest a lot of money on buying gear when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will be no difference between the artistic hand and the hands.

How to Become a Master Woodworker From Your Own Home Barn Style Shed Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will provide you time to research different projects and learn a lot of things. That is why it’s important to spend less money when starting out so you can manage to make errors and at any time learning about various jobs.
It’s very important that you know more about the different types of wood available for creating jobs. Expect carpenters use different kinds of wood quality for decorating bits, learning what kind of wood they use will help you prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you understand the basics of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to fulfill your wants.

Barn Style Shed Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of designs using various tools so you can find the hang of working with the tools. When starting out you may make a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Barn Style Shed Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop may generate a broad array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you’ll do your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space into your woodworking tasks. This may be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your very first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the top levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without bothering the remainder of the household. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Barn Style Shed Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Barn Style Shed Plans if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment could be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. At the beginning, set up a bench area where you are able to store and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf beneath the bench to home your hands power tools along with a pegboard over the seat to hang other gear. Install a woodworking at one end of the bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Barn Style Shed Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools in the local construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. There are plenty of quality gently used programs out there that belong to people who stumbled on that 1 molding project around the house or received tools as gifts which they will never use. You can usually buy tools for all these sellers for under half of the initial cost and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and perhaps travel expenditures. Weigh out the benefits of traveling around town to save a couple added dollars on a inexpensive piece of equipment. The excess expense of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to high sound levels. Select effective hearing protection that you find comfortable and effective. These may contain earplugs or full ear keyword muff protectors. I find that a excellent set of ear muff guards is ideal for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the popular name, this can prove to be the most flexible instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an entire house. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next project. After choosing the proper saw put in a quality blade. Most saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t just cut curves. It is perfect for cutting holes in wood too like manage slots. Eventually, you’ll want to get a band saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this case, is much more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t need in your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might discover that your palm sander using a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally requires the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a pair of the maximum clamps which you could afford. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you quick release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle rotation. The wood beamed surfaces on your vice will occasionally need replacement. I would rather use soft walnut in my vices which won’t crush or damage lots of the different woods that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of your most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape usually from the 25-foot range. Even though in your shop you may not use the tape at these lengths, the bigger tape steps provide more rigid tapes that will not flop around and slip off the end of planks. Measuring when you’re on your own will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Get the number three and two Robertson set. I find the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The expense of glue through all of your projects is a little cost consideration. Therefore, it is sensible to decide on the best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Barn Style Shed Plans

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimal investment in the most rudimentary tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Weald and Downland Living Museum

The Weald and Downland Living Museum (formerly known as the Weald and Downland Open Air Museum until January 2017) is an open-air museum in Singleton, West Sussex. The museum is a registered charity.[1]

The principal aim at the foundation of the museum was to establish a centre that could rescue representative examples of vernacular buildings from South East England, and thereby to generate increased public awareness and interest in the built environment.

The Museum principally promotes the retention of buildings on their original sites unless there is no alternative, and encourages an informed and sympathetic approach to their preservation and continuing use.

Video: Woodworking Tools