Barrel Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re after because all the ideas and jobs Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People that are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to find any project of their choice in this package quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it will be backed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that can be found throughout the net. Ted has done his very best to guide them in every possible way he could, through simple to understand textual directions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find inside. So, it’s definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Barrel Furniture Plans

Woodworking is 1 hobby that can also be a rewarding profession if you love to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Barrel Furniture Plans.

It takes time to become proficient in the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will be able to build some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How can you make it? Where did you get the woodworking plans? How long did it take to complete the project? What kind of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you speak about your work, a sense of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Barrel Furniture Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Barrel Furniture Plans.

Begin with an idea in your mind of what you want to construct then get a excellent woodworking project plan that’s geared toward beginners. There are several small woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can begin with as expansive a woodworking plan as you choose. However, the chances are if you begin with a little woodworking project at first, you’ll have a better prospect of keyword completing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and type of wood required, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you might not use all that frequently. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry area to work and may need a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Barrel Furniture Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the writers in woodworking magazines do a story about how to improve your woodworking craft. When it’s showing you how you can apply an end to a finished job, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Barrel Furniture Plans

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking can be interesting. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential aspects that you need to remember, before starting with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Making something new with your own hands is a particular feeling. Don’t begin a project if you are not interested, because this might land you at a bad place.

2. Think of the primary reason for creating this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start projects which you can finish. If you’re in the midst of some work, then it is better not to begin any project in any way.

The Benefits of Woodworking Barrel Furniture Plans

If you maintain these vital things in your mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to start with. As a beginner, always pick a job which has quite a basic construct up or a simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always proceed into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Barrel Furniture Plans

Tools are the ways whereby you can win the struggle of woodworking. Many people think that power tools are requires. But for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there on the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them will help you ahead of time woodworking. You might even purchase keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for beginners, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking jobs. Dependent on the type of job that you want to finish, pricing can be determined. The simple the job, the less price it involves. However, at the beginning purchasing the tools will probably be a little hefty. Because of this, it’s much better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t need to buy any more material other than the wood ply.

Time and Directions

Instructions are among the principal things which every beginner should follow. Instructions manual is quite simple to comprehend the process, what to do and how to do it. Time also plays a significant part in the building of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that can help you to achieve success is proper preparation. With proper planning and a plan, it’s possible to achieve success quickly. If you know the purpose of woodworking, then the thing you need to build, the resources you need in order to possess and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Barrel Furniture Plans

All these tips and education is likely to create the woodworking projects and strategies for beginners fast to complete. Always ensure you have all of the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Barrel Furniture Plans

Folks if you’re looking for a way to pass time or want an alternate way to make money they generally turn to a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be quite careful when choosing which project to start out with since there are projects that may be too tough for a newbie. But do not worry about that since we are going to give you guidelines on the ideal means to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you pick your job you need to be aware of whether you’ve got the available tools to work on that job. Try not to spend a good deal of money on buying gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no gap between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Barrel Furniture Plans

Woodworking at home will provide you time to research different jobs and learn so many things. That is why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different jobs.
It’s extremely important you know about the different kinds of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating bits, learning what type of wood they use will help you prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you understand the basics of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to satisfy your wants.

Barrel Furniture Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out a lot of designs utilizing various tools so that you may find the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Barrel Furniture Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimum number of tools and equipment. A small home workshop may generate a broad array of simple projects which can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you’ll perform your woodworking, Depending on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking tasks. This may be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the rest of the family. A fantastic compromise might be the garage of your property.

This can help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Barrel Furniture Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Barrel Furniture Plans if you’re able to have a dedicated spot for a marathon all the greater. Floor gear and bench top gear can stay in position from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. At the start, establish a bench area where you are able to store and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to home your hands power tools and a pegboard over the bench to hang additional equipment. Install a woodworking at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Barrel Furniture Plans

The reach of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools at the regional construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality gently used tools out there which belong to people who stumbled on that one molding project around the home or received tools as presents that they won’t ever use. You can usually buy tools for these sellers for under half of the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private people will take additional time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few added dollars on a cheap piece of gear. The excess expense of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimum amount of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this may end up being the most flexible tool in a startup workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an entire property. At some point, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next job. After choosing the right saw install a quality blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t just cut curves. It’s perfect for cutting holes in wood too like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t need in your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might find your palm sander with just a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in timber pieces. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally requires the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer quick release mechanisms that enabled the user to quickly open and close the limbs with no tedious handle rotation. The timber beamed surfaces on your vice will occasionally require replacement. I prefer to use soft pine in my vices which won’t crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among your most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape typically in the 25-foot range. Even though in your shop you might not be using the tape at these lengths, the larger tape measures provide more rigid tapes which will not flop around and slide off the ending of planks. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the right angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. The cost of adhesive through all of your jobs is a minor cost consideration. Therefore, it is sensible to go with the best. I also have found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Barrel Furniture Plans

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Crate & Barrel

Euromarket Designs, Inc. (d/b/a Crate & Barrel) is a 105+ chain of retail stores in US and Canada, based in Northbrook, Illinois,[1] specializing in housewares, furniture (indoor and out), and home accessories. Its corporate name is Euromarket Designs, Inc. The company is wholly owned by Otto GmbH.

Gordon and Carole Segal opened the first Crate & Barrel store on December 7, 1962,[2] at age 23.[3] The 1,700-square-foot (160 m2) space in part of an old elevator factory[4] was located at 1516 North Wells Street in the then-bohemian Old Town neighborhood of Chicago, Illinois.[5] The inspiration was their honeymoon in the Caribbean, where the Segals saw inexpensive yet tasteful European household products for sale. They became interested in providing functional yet aesthetically pleasing products to young couples just starting out. Surprised to see that European manufacturers offered many beautiful and durable products at reasonable prices, they were inspired to start their own store in the United States.[5] The Segals started by recruiting an employee and leasing an abandoned elevator factory on Chicago's Wells Street. They traveled throughout Europe buying directly from glassblowers, ceramicists and factories making French copper pots and simple white bistro dinnerware.[6]

The first store opened in response to a flourishing of world trade in home furnishings due to the early 1960s round of talks about the General Agreement on Tariffs and Trade. The Segals sought out small European companies that were not represented in America and negotiated direct purchases from these factories that could be sold to the consumer while avoiding a wholesaler's markup. To this day, a majority of Crate & Barrel's products are direct imports from Europe, though Thai, Mexican and Indian glass and textiles can also be found in their stores.

Video: Woodworking Projects