Bed Plans Woodworking | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because most of the thoughts and projects Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the right option. There are in fact lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any job of their choice in this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large size. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that can be found throughout the internet. Ted has done his best to direct them in every possible way he can, through simple to comprehend textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. Therefore, it is definitely worth buying!

The Benefits of Woodworking Bed Plans Woodworking

Woodworking is 1 hobby that could also be a rewarding profession if you love to work with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to build all types of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Bed Plans Woodworking.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to build some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It will be a topic of conversation whenever you have friends come over to see. They’ll ask: How did you create it? Just how long did it take to complete the job? What kind of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you speak about your job, a sense of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Bed Plans Woodworking

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Bed Plans Woodworking.

Begin with a concept in your mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking retailers. A few woodworking program suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to mention a couple. Of course, you can begin with as grand a woodworking plan as you pick. However, the chances are if you start out using a small woodworking project at first, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not utilize all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood glue! Of course, you will need a dry place to work and might require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools that beginners will need. You may always add to your toolbox as you get experience!

Bed Plans Woodworking Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you’re not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the authors in woodworking magazines do a story on how best to improve your woodworking craft. When it’s showing you how you can apply an end to a completed project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Bed Plans Woodworking

If you are just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you do not have the right information, education, and ability, you might wind up spending more time and money than you originally intended to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a few essential aspects you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a particular sense. Don’t start a job if you’re not interested, as this may land you in a terrible place.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and examine the time that you have, until you begin with a project.

4. Start projects which you can complete. If you’re in the middle of some work, then it’s wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Bed Plans Woodworking

If you keep those essential things in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you want to start with. As a newcomer, always pick a job that has a very basic build up or a very simple construction. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always proceed to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Bed Plans Woodworking

Tools would be the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are needs. But for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much simple for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You can even purchase keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking projects. Based on the type of project you want to finish, pricing could be set. The easy the project, the less cost it involves. But at the beginning purchasing the tools will be a little hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t have to purchase any more material other than the wood ply.

Time and Instructions

Instructions are among the primary things that each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is very simple to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for finishing the job. Time also plays an important role in the building of woodworking jobs. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword that will help you to achieve success is proper planning. With proper planning and a plan, it’s likely to achieve success immediately. If you understand the objective of woodworking, then the item that you need to construct, the resources you require to possess and the typical time it’s possible to devote daily; then you are all set to go.

Conclusion, Bed Plans Woodworking

All these strategies and instruction will create the woodworking projects and strategies for novices fast to complete. Always ensure you have all the essential tools, materials, area prepared. Read the instructions for building an item handy. Appropriate strategy and planning will allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Bed Plans Woodworking

Folks if you’re trying to find a way to pass time or want an alternate method to make money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be quite cautious when choosing which project to begin with because there are jobs that may be too difficult for a newbie. But don’t be concerned about that because we are going to provide you tips on the right means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you choose your job you need to know if you have the available resources to work on that project. Try not to spend a lot of cash on purchasing equipment when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no gap between the hand as well as the hands.

The Benefits of Woodworking Bed Plans Woodworking

Woodworking in your home will provide you time to research unique projects and find out so many things. That is why it’s important to spend less money when starting out so that you can manage to make errors and at any time learning about various jobs.
It’s extremely important that you know about the different kinds of wood available for making jobs. Anticipate carpenters use different types of wood quality for decorating bits, learning which kind of wood that they use will allow you to prepare the wood you’ll need for specific projects you might choose to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good projects to satisfy your wants.

Bed Plans Woodworking practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of layouts utilizing a variety of tools so that you may find the hang of using the tools. When starting out you may earn a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Bed Plans Woodworking

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum amount of tools and equipment. A little home workshop may produce a wide variety of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us talk about where you will do your woodworking, based on the dimensions of your home, you may have the ability to create a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding might be ideal to set up your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Bed Plans Woodworking

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Bed Plans Woodworking if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top gear can remain in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the start, establish a bench area where you can shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard over the bench to hang additional gear. Install a woodworking vice at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Bed Plans Woodworking

The reach of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools at your regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used programs out there that belong to individuals who embarked on that 1 molding project around the house or received tools as presents that they won’t ever use. You can usually buy tools for all these sellers for less than half the initial cost and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and perhaps travel expenditures. Weigh out the advantages of traveling around town to save a couple added dollars on a inexpensive piece of gear. The extra expense of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this may prove to be the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be employed to construct an entire house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After selecting the proper saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut corners. It is ideal for cutting holes in timber also like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want in your workshop. Purchase an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll discover your palm sander using a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you could spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to rapidly open and close the limbs without dull handle turning. The timber clamping surfaces in your vice will periodically need replacement. I prefer to use soft walnut in my vices that won’t crush or damage many of the different woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your shop you might not be using the tape in these spans, the larger tape measures provide more rigid tapes that will not flop around and slide off the ending of boards. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape steps can last for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can help you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The cost of glue through all your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I also have found over the years that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Bed Plans Woodworking

The peaceful gratification of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects