Beginner Woodwork Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are following because most of the ideas and projects Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the right choice. There are actually many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are just getting started will discover the thoughts and projects in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Yet, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the net. Ted has done his best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is certainly worth buying!

Starting Your First Woodworking Shop Beginner Woodwork Projects

Woodworking is 1 hobby that can also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Beginner Woodwork Projects.

It takes time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It’ll be a subject of conversation whenever you have friends come over to visit. They will ask: How can you create it? Where did you get the woodworking plans? Just how long can it take to finish the job? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a sense of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Beginner Woodwork Projects

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to begin in Woodworking? Beginner Woodwork Projects.

Start with a concept in your mind of what you want to construct then get a excellent woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for novices available for sale from online woodworking retailers. Of course, you can start out with as grand a woodworking plan as you choose. However, the chances are if you start out using a little woodworking project initially, you’ll get a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and variety of wood needed, and the required hand tools and power tools to complete the project. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry place to work and might need a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which novices will need. You can always add to your toolbox as you get experience!

Beginner Woodwork Projects Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Every month the writers in woodworking magazines do a story on how best to improve your woodworking craft. When it is showing you the way you can apply an end to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Beginner Woodwork Projects

If you are just beginning and very enthusiastic about doing a DIY job for home afterward, woodworking could be fun. If you don’t have the right information, instruction, and skill, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t start a job if you are not interested, because this might land you in a bad place.

2. Consider the primary reason for making this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start jobs which you can complete. If you’re in the midst of a work, then it’s better not to start any project in any way.

Starting Your First Woodworking Shop Beginner Woodwork Projects

If you keep these essential things in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking jobs that you want to begin with. As a newcomer, always select a project which has quite a basic build up or a simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always move to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Beginner Woodwork Projects

Tools are the ways whereby you can win the battle of woodworking. Many men and women believe power tools are needs. But for novices, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available on the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You might also purchase keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed price on woodworking jobs. Dependent on the type of job you want to finish, pricing can be determined. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Therefore, it is better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not have to purchase any more material other than the timber ply.

Time and Instructions

Directions are one of the principal things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is very easy to comprehend the process, what to do and how to get it done. It keyword is a systematic manual for finishing the job. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to reach success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you know the purpose of woodworking, then the item that you want to construct, the tools you require in order to possess and the average time you can give every day; then you are all set to go.

Conclusion, Beginner Woodwork Projects

All these tips and education will create the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all of the essential tools, materials, space ready. Read the instructions for constructing a product handy. Proper strategy and planning can allow you to make a fantastic woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Beginner Woodwork Projects

Folks when looking for a way to pass time or desire an alternative way to make money they generally turn to a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you have to be quite careful when choosing which job to begin with since there are projects which may be too tough for a beginner. But don’t be concerned about that since we will give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you pick your project you need to be aware of whether you’ve got the available tools to work on that project. Try not to invest a lot of money on purchasing gear when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners Beginner Woodwork Projects

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will provide you time to research different jobs and learn so many things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different projects.
It is extremely important that you know more about the different kinds of wood available for making projects. Expect carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood they use can allow you to prepare the wood you will need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to satisfy your wants.

Beginner Woodwork Projects practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of designs using various tools so that you may get the hang of working with the tools. When starting out you can make a number of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Beginner Woodwork Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum number of tools and equipment. A little home workshop may produce a wide variety of simple projects that can help you develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you’ll do your woodworking, Depending on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the rest of the family. A good compromise might be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Beginner Woodwork Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Beginner Woodwork Projects if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. At the beginning, set up a bench area where you are able to shop and use most of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf below the bench to home your hand power tools and a pegboard above the bench to hang additional gear. Put in a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Beginner Woodwork Projects

The reach of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in your local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. There are plenty of quality gently used programs out there which belong to people who stumbled on that one molding project around the home or obtained tools as presents which they won’t ever utilize. You can usually buy tools for these sellers for under half of the initial cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a few added bucks on a inexpensive piece of equipment. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here’s a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this may prove to be the most flexible tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw can be employed to construct an whole house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your second job. After choosing the proper saw install a quality blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid blade. All these possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t just cut corners. It is perfect for cutting holes in wood also like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not want in your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on your first few projects you’ll find that your palm sander with just a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and fix any imperfections in wood bits. {Begin with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a few years to collect a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps which you can afford. You can get in touch with them for smaller glue jobs and expand them to their full length for larger projects.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enabled the user to quickly open and close the limbs without dull handle turning. The timber clamping surfaces in your vice will occasionally require replacement. I prefer to use soft walnut in my vices which won’t crush or damage lots of the various forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most often used tools. Purchase a good excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your shop you might not use the tape in these lengths, the larger tape measures offer more rigid tapes that won’t flop around and slide off the ending of boards. Assessing when you are on your own will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The cost of adhesive through all of your jobs is a minor cost consideration. Therefore, it is sensible to go with the very best. I have also found over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Beginner Woodwork Projects

The peaceful gratification of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools