Bench Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because all the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those who are only getting started will discover the ideas and projects in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will find it really easy to follow Ted’s simple step by step directions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will be able to find any project of their choice within this package quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found across the internet. Ted has done his best to direct them in every conceivable way he could, through easy to understand textual directions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Bench Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story about how best to increase your woodworking craft. Whether it is showing you how you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Bench Woodworking Plans

If you are a beginner and very interested in doing a DIY project for home then, woodworking can be fun. If you don’t have the proper information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential aspects you should remember, before starting with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Creating something new with your own hands is a special sense. Don’t begin a project if you are not interested, because this might land you at a bad place.

2. Think of the main reason for making this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, until you begin with a job.

4. Start projects that you’re able to complete. If you are in the middle of a work, then it’s better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Bench Woodworking Plans

If you maintain those essential things in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to begin with. As a beginner, always pick a job that has quite a basic construct up or a very simple construction. Some simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should keyword be complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Bench Woodworking Plans

Tools are the means whereby you will win the struggle of woodworking. A lot of men and women believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things considerably easy for you. When you purchase a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for novices, but using it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking jobs. Based on the type of project you would like to finish, pricing could be set. The simple the project, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you do not have to buy any more material other than the wood ply.

Time and Instructions

Directions are one of the primary things which every beginner should follow. It is like the woodworking Bible. Instructions manual is very simple to comprehend the procedure, what to do and how to get it done. Time also has a significant role in the building of woodworking projects. Woodworking projects demand time and so it is crucial for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword which can allow you to achieve success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you understand the purpose of woodworking, the thing you need to build, the tools you need to own and the average time it’s possible to devote daily; then you are ready to go.

Conclusion, Bench Woodworking Plans

All these tips and education is likely to create the woodworking projects and strategies for beginners quickly to complete. Always make sure that you have all the vital tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation will help you to earn a fantastic woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Bench Woodworking Plans

Folks if you’re trying to find a way to pass time or want an alternate way to make money they generally turn to a hobby that they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be very cautious when choosing which project to start out with since there are projects that may be too difficult for a newbie. But don’t worry about that since we will provide you tips on the ideal way to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, so before you choose your project you have to know if you have the available resources to work on that project. Try not to spend a lot of cash on purchasing gear when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Bench Woodworking Plans

Woodworking at home will give you time to research different jobs and find out so many things. That’s why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different jobs.
It is extremely important that you know about the different types of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you will need for specific projects you might want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Bench Woodworking Plans practice makes perfect so be sure you practice your work daily if possible. Try out a lot of designs using a variety of tools so you may get the hang of working with the tools. When starting out you may earn a number of errors but with time you will learn how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Bench Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop can generate a broad array of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you’ll perform your woodworking, Depending on the dimensions of your home, you might have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops would be, clearly, the sound level. You can work without disturbing the rest of the family. A good compromise could be the garage of your home.

This can help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Bench Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Bench Woodworking Plans if you can have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can remain in place from project to project. If this setup isn’t hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the beginning, establish a seat area where you can shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf beneath the seat to house your hand power tools along with a pegboard above the seat to hang additional equipment. Install a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Bench Woodworking Plans

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools at the regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality gently used programs out there that belong to people who stumbled on that one molding project around the house or received tools as presents which they will never use. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple extra bucks on a cheap piece of equipment. The extra expense of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand gear yet produced sophisticated and intricate pieces. Focus on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated noise levels. Last, put on a cap to keep the dust from your hair. With this setup I am protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the favorite name, this can prove to be the most versatile instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be used to build an entire house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second job. After choosing the proper saw install an excellent blade. Most saws include a starter blade of lower quality even if they are a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot just cut corners. It’s ideal for cutting holes in timber also like manage slots. At some point, you’ll want to get a band saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Buy an assortment of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander using a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a standard number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a set of the longest clamps which you could afford. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the jaws without dull handle rotation. The timber beamed surfaces on your vice will periodically require replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the different forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically in the 25-foot range. Although in your shop you might not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which won’t flop around and slide off the end of planks. Measuring when you are on your own will be a great deal easier, and of course, quality tape steps can endure for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. The cost of adhesive through all of your projects is a little cost consideration. Therefore, it makes sense to go with the very best. I have also found over the years that I get the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Bench Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Workbench (woodworking)

A workbench is a table used by woodworkers to hold workpieces while they are worked by other tools. There are many styles of woodworking benches, each reflecting the type of work to be done or the craftsman's way of working. Most benches have two features in common: they are heavy and rigid enough to keep still while the wood is being worked, and there is some method for holding the work in place at a comfortable position and height so that the worker is free to use both hands on the tools. The main thing that distinguishes benches is the way in which the work is held in place. Most benches have more than one way to do this, depending on the operation being performed.

Probably the oldest and most basic method of holding the work is a planing stop or dog ear, which is simply a peg or small piece of wood or metal that stands just above the surface at the end of the bench top. The work is placed on the bench with the end pushed against the stop. The force of the planing keeps the board in place, so long as the force is always toward the stop. Planing against a stop gives the woodworker good feedback - they can tell a lot about what is going on just by the pressure, force and balance required. A stop can take the form of a batten attached to the end of the bench, or it can be adjustable, able to be moved up and down according to the size of the work - or pushed down below the surface when not needed. A simple bench dog can serve as a planing stop.

Another ancient method of holding the work is the hold fast or holdfast. A holdfast looks like a shepherd's crook. The shank goes into a hole in the bench top and the tip of the hook is pressed against the work from above. The holdfast is set by rapping the top with a mallet, and released by hitting the back side. A good holdfast works remarkably well, and is inexpensive and easy to install.

Video: Woodworking Tools