Best Free Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because most of the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more challenging to make the right choice. There are actually lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People that are just getting started will discover the thoughts and projects in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step by step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to locate any job of their choice within this package quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it will be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found throughout the internet. Ted has done his very best to direct them in every possible way he can, through simple to understand textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find inside. Therefore, it’s definitely worth buying!

The Benefits of Woodworking Best Free Woodworking Plans

Woodworking is one hobby that can also be a rewarding career if you like to work with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your completed woodworking projects and make a handsome profit. Best Free Woodworking Plans.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will be able to build some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It will be a subject of conversation whenever you have friends come over to see. They’ll ask: How can you make it? Just how long can it take to complete the job? What kind of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you speak about your job, a sense of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Best Free Woodworking Plans

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Best Free Woodworking Plans.

Start with a concept in mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for novices available for purchase from online woodworking retailers. Of course, you can begin with as expansive a woodworking plan as you choose. On the other hand, the odds are if you start out with a little woodworking project initially, you’ll have a better prospect of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking tools, but you can easily break the bank buying a lot of tools you might not use all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t forget the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry place to work and might need a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that beginners will need. You may always add to your arsenal as you get experience!

Best Free Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking publications do a story on the best way to increase your woodworking craft. Whether it is showing you how you can apply an end to a finished project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Best Free Woodworking Plans

If you are a beginner and very interested in doing a DIY job for house afterward, woodworking can be fun. If you do not have the proper information, instruction, and skill, you might wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential factors you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Making something new with your own hands is a particular feeling. Don’t begin a project if you’re not interested, because this might land you in a terrible place.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of the item you are making.

3. Consider your abilities and examine the time that you have, before you begin with a project.

4. Start jobs which you’re able to complete. If you’re in the middle of some work, then it is better to not begin any project in any way.

Starting Your First Woodworking Shop Best Free Woodworking Plans

If you maintain those vital things in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to start with. As a beginner, always select a job that has a very basic construct up or a very simple structure. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you can always move to the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Best Free Woodworking Plans

Tools are the means whereby you can win the struggle of woodworking. Many people think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available in the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You can even buy keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking projects. Based on the sort of job you would like to finish, pricing can be set. The simple the job, the less price it involves. But at the beginning purchasing the tools will be a little hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not have to buy any more material aside from the wood ply.

Time and Instructions

Directions are one of the primary things that each and every beginner should follow. It is like the woodworking Bible. Instructions manual is very simple to comprehend the process, what to do and the way to get it done. It keyword is a systematic guide for completing the project. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword which will allow you to reach success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you know the objective of woodworking, the thing you want to build, the tools you need to possess and the average time it’s possible to devote every day; then you’re ready to go.

Conclusion, Best Free Woodworking Plans

All these strategies and instruction will create the woodworking projects and strategies for novices quickly to complete. Always ensure you have all of the essential tools, materials, space prepared. Keep the instructions for constructing an item handy. Proper strategy and preparation can help you to earn a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Best Free Woodworking Plans

Folks when trying to find a way to pass time or desire an alternative way to generate money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be very cautious when choosing which project to begin with because there are projects which can be too difficult for a beginner. But do not be concerned about that since we are going to give you guidelines on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, so before you pick your project you have to know whether you have the available resources to work on that job. Try not to invest a good deal of cash on buying gear when starting out, buy more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the artistic hand and the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Best Free Woodworking Plans

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking in your home will provide you time to explore different projects and find out so many things. That is why it’s very important to spend less money when starting out so that you can manage to make errors and at some time learning about various jobs.
It’s very important that you know about different kinds of wood available for making projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning what kind of wood that they use can help you prepare the wood you’ll need for specific jobs you might choose to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good projects to fulfill your wants.

Best Free Woodworking Plans practice makes perfect so be sure you practice your work daily if possible. Try out a lot of designs utilizing various tools so that you may find the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Best Free Woodworking Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimal number of gear and equipment. A little home workshop may produce a wide variety of simple projects which can help you develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you will perform your woodworking, based on the size of your house, you might be able to produce a dedicated space to your woodworking activities. This might be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to prepare your very first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw up dust into the upper levels of the house. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the household. A good compromise might be the garage of your property.

This might help decrease the problems of dust and sound, however depending on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Best Free Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Best Free Woodworking Plans if you can have a dedicated spot for a marathon all the better. Floor tools and bench top gear can stay in position from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. At the start, establish a bench area where you are able to store and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to home your hands power tools along with a pegboard above the seat to hang other equipment. Install a woodworking vice at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Best Free Woodworking Plans

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools in your regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative local ads. There are an abundance of quality gently used programs out there that belong to individuals who stumbled on that 1 molding project around the home or received tools as gifts that they will never utilize. You can usually purchase tools for all these sellers for less than half the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require extra time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a few extra dollars on a inexpensive piece of gear. The extra expense of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated sound levels. Last, put on a cap to keep the dust out of your hair. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this may prove to be the most versatile instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an entire house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After choosing the proper saw install an excellent blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Begin with a hybrid . These possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot just cut curves. It is perfect for cutting holes in wood too like handle slots. At some point, you’ll want to get a band saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is much more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t need on your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll find your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the maximum clamps that you can spend. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of the bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the consumer to quickly open and close the limbs with no tedious handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft pine in my vices that will not crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Buy a good quality name brand tape measure with a broad tape typically from the 25-foot range. Although in your store you might not use the tape at these lengths, the larger tape measures offer more rigid tapes that won’t flop around and slide off the ending of boards. Assessing when you are on your own will be a lot simpler, and naturally, quality tape steps can last for many decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The cost of adhesive through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the best. I have also discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Best Free Woodworking Plans

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Drawknife

A drawknife (drawing knife, draw shave, shaving knife)[1] is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer (along the cutting edge) than it is deep (from cutting edge to back edge). It is pulled or "drawn" (hence the name) toward the user.

The drawknife in the illustration has a blade 23 centimetres (9.1 in) although much shorter drawknives are also made. The blade is sharpened to a chisel bevel. Traditionally, it is a rounded, smooth bevel. The handles can be below the level of the blade (as in the illustration) or at the same level.[2]

A drawknife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves.

Video: Woodworking Projects