Build Your Own Furniture Free Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re after because all the ideas and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the ideal option. There are in fact lots of things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. Those that are only getting started will discover the thoughts and jobs in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to locate any project of their choice in this package quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who buy it’ll be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large dimensions. Yet, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to guide them in every conceivable way he can, through easy to comprehend textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You may always increase your arsenal as you get experience!

Build Your Own Furniture Free Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the writers in woodworking publications do a story on the best way best to increase your woodworking craft. Whether it is showing you how to apply an end to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Build Your Own Furniture Free Plans

If you are a beginner and very enthusiastic about doing a DIY project for home then, woodworking could be interesting. If you do not have the proper information, instruction, and skill, you might wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t start a job if you are not interested, as this may land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the thing you are making.

3. Consider your skills and examine the time that you have, until you start with a job.

4. Start jobs that you can finish. If you are in the midst of a work, then it’s wise not to begin any project at all.

How to Become a Master Woodworker From Your Own Home Build Your Own Furniture Free Plans

If you maintain those essential things in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to start with. As a beginner, always pick a job which has a very basic build up or a very simple structure. Some simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Build Your Own Furniture Free Plans

Tools are the ways whereby you will win the struggle of woodworking. A lot of people think that power tools are requires. But for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws available on the marketplace. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking projects. Based on the sort of project that you would like to complete, pricing could be set. The simple the project, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it is much better to resolve a budget on the resources, then keyword on the project. Buying the fundamental tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Directions

Instructions are one of the principal things that every beginner should follow. Instructions guide is very simple to understand the process, what to do and how to get it done. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword that will allow you to reach success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success quickly. If you understand the objective of woodworking, the thing you want to build, the tools you need to possess and the typical time you can give daily; then you are ready to go.

Conclusion, Build Your Own Furniture Free Plans

These tips and education is likely to make the woodworking projects and plans for beginners fast to complete. Always make sure that you have all the essential tools, materials, space prepared. Keep the instructions for building an item handy. Appropriate strategy and planning will help you to earn a fantastic woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Build Your Own Furniture Free Plans

Folks if you’re looking for a way to pass time or desire an alternate way to make money they generally turn into a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be very cautious when choosing which job to start out with because you will find projects that can be too tough for a newbie. But don’t be concerned about that because we are going to provide you tips on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you have to know whether you’ve got the available tools to work on such a job. Try not to spend a good deal of cash on buying gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Build Your Own Furniture Free Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will give you time to research unique jobs and learn so many things. That is why it’s very important to spend less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It’s extremely important that you know more about different kinds of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating bits, learning which kind of wood that they use can allow you to prepare the wood you will need for specific projects you may choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to satisfy your wants.

Build Your Own Furniture Free Plans practice makes perfect so be sure you practice your work every day if possible. Try out a lot of layouts utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you may earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Build Your Own Furniture Free Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimum amount of tools and equipment. A little home workshop may produce a broad variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you’ll perform your woodworking, based on the size of your house, you may have the ability to create a dedicated space into your woodworking activities. This might be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the top levels of the home. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without disturbing the remainder of the household. A good compromise could be the garage of your property.

This can help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Build Your Own Furniture Free Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Build Your Own Furniture Free Plans if you can have a dedicated place for a workshop all the better. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the start, set up a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard over the seat to hang other equipment. Put in a woodworking at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Build Your Own Furniture Free Plans

The reach of your startup equipment will be largely based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools in your regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. You will find an abundance of quality gently used tools out there that belong to individuals who stumbled on that one molding job around the house or obtained tools as gifts that they will never utilize. You can usually buy tools for these sellers for under half of the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a few extra dollars on a cheap piece of equipment. The excess expense of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to high sound levels. Select powerful hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust from your hair. With this setup I’m shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw following the popular brand name, this can end up being the most versatile tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw can be used to construct an whole property. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your next project. After choosing the right saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot just cut curves. It is perfect for cutting holes in timber too like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Even though the most ordinary, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll discover your palm sander with a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and fix any imperfections in wood bits. {Begin with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a set of the longest clamps which you could afford. You can contact them for smaller adhesive jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed in the end of your bench is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the user to rapidly open and close the limbs with no tedious handle turning. The wood beamed surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices that will not crush or damage many of the various woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape typically from the 25-foot range. Even though in your store you may not be using the tape at these spans, the larger tape steps offer more rigid tapes that will not flop around and slip off the ending of boards. Measuring when you are by yourself will be a lot simpler, and naturally, quality tape steps can endure for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. The expense of glue through all of your jobs is a minor cost consideration. For that reason, it makes sense to decide on the best. I also have found over the years that I receive the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Build Your Own Furniture Free Plans

The peaceful satisfaction of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

The Sims 4

The Sims 4 is the fourth major title in the life simulation video game series The Sims. Developed by Maxis and published by Electronic Arts, The Sims 4 was originally announced on May 6, 2013, and was released in North America on September 2, 2014 for Microsoft Windows.[1] A Mac compatible version of the game was made available for digital download on February 17, 2015.[2] The Sims 4 is the first PC game to top all-format charts in two years.[3] The game has received mixed reviews since its release, with the majority of criticism directed towards its lack of content.[4]

Since its launch, it became the best selling PC game of 2014 and 2015. To date EA has released six expansion packs. The most recent is Get Famous, which was released on November 16, 2018. There have also been several "game packs" released, including Parenthood which allows the players to shape the characters' children and teenagers as they go through life, as well as free updates that include major changes such as the addition of a toddler life stage that was previously non-existent.

The Sims 4 is a life simulation game, similar to its predecessors. Players create a Sim character and control their life to explore different personalities which change the way the game plays out. Sims can multitask such as talk while doing a task. Sims' moodlets also change the gameplay. For example, a Sim can do a task while being either angry or totally excited.[5][6][7]

Video: Woodworking Projects