Building A Project Plan | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are following because all the ideas and jobs Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are actually many things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will find the ideas and projects in Ted’s package quite easy. No doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to be able to locate any job of their choice in this package quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it will be endorsed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large size. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the internet. Ted has done his very best to direct them in every conceivable way he could, through easy to understand textual directions, clear pictures and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it’s definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Building A Project Plan

Woodworking is 1 hobby that could also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll be able to construct all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Building A Project Plan.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll have the ability to build some really wonderful furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It’ll be a topic of conversation when you have friends come over to see. They will ask: How did you make it? Where did you get the woodworking plans? How long can it take to finish the job? What type of wood did you use? What type of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will encounter you and don’t be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Building A Project Plan

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Building A Project Plan.

Start with an idea in mind of what you want to construct and then get a excellent woodworking project plan that is geared toward novices. There are numerous small woodworking projects for beginners available for sale from online woodworking retailers. Obviously, you can start out with as expansive a woodworking program as you pick. However, the chances are if you begin using a small woodworking job initially, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the quantity and variety of wood needed, and the required hand tools and power tools to complete the project. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking gear, but it is simple to break the bank buying a lot of tools you may not use all that often. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood glue! Obviously, you will require a dry place to work and might require a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to buy the crucial hand and power tools which beginners will need. You can always add to your arsenal as you get experience!

Building A Project Plan Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the writers in woodworking publications do a story about how best to improve your woodworking craft. Whether it’s showing you how you can apply an end to a finished job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Building A Project Plan

If you are just beginning and very interested in doing a DIY job for house then, woodworking could be fun. If you do not have the right information, instruction, and skill, you may wind up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t start a project if you are not interested, as this may land you at a terrible location.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and examine the time you have, before you start with a project.

4. Start projects that you’re able to complete. If you are in the midst of a work, then it’s wise to not begin any project in any way.

The Benefits of Woodworking Building A Project Plan

If you maintain these vital points in mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to begin with. As a beginner, always select a job which has quite a basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Building A Project Plan

Tools would be the ways whereby you can win the struggle of woodworking. Many men and women believe power tools are needs. But for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there in the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can also buy keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking projects. Dependent on the sort of project that you want to complete, pricing could be set. The simple the project, the less cost it involves. But at the beginning purchasing the tools will probably be a little hefty. Because of this, it is better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material other than the wood ply.

Time and Instructions

Instructions are among the primary things which each and every newcomer should follow. Instructions manual is very easy to comprehend the procedure, what to do and how to do it. It keyword is a systematic manual for completing the job. Time also has an important part in the construction of woodworking projects. Woodworking projects require time and therefore it’s necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the objective of woodworking, then the thing you need to construct, the tools you need to own and the average time it’s possible to give every day; then you are all set to go.

Conclusion, Building A Project Plan

All these strategies and education is likely to create the woodworking projects and strategies for novices fast to finish. Always make sure that you have all the essential tools, materials, area prepared. Keep the instructions for building a product handy. Proper strategy and planning will help you to earn a great woodworking project for your property.

|

The Benefits of Woodworking Building A Project Plan

Folks when trying to find a way to pass time or desire an alternate way to generate money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be very careful when choosing which job to begin with because you will find jobs which can be too difficult for a newbie. But don’t be concerned about that since we will give you tips on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you have to be aware of whether you’ve got the available resources to work on such a project. Try not to spend a good deal of cash on purchasing equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking Building A Project Plan

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will give you time to explore different projects and learn a lot of things. That’s why it’s important to spend less money when starting out so you can afford to make errors and at some time learning about different projects.
It is very important that you know about different kinds of wood available for creating projects. Expect carpenters use several kinds of wood quality for decorating bits, learning which type of wood they use will help you prepare the wood you’ll need for specific jobs you may want to pursue.
Once you know the fundamentals of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good jobs to fulfill your wants.

Building A Project Plan practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so that you can get the hang of working with the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Building A Project Plan

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A little home workshop can generate a wide variety of simple projects that can allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you will do your woodworking, Depending on the size of your house, you may have the ability to produce a dedicated space into your woodworking activities. This might be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to set up your very first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the rest of the family. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Building A Project Plan

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Building A Project Plan if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top gear can remain in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, establish a seat area where you are able to shop and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will enable you to work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools and a pegboard over the bench to hang other gear. Install a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Building A Project Plan

The scope of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools at the regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality gently used tools out there that belong to people who stumbled on that one molding project around the house or received tools as gifts which they won’t ever use. You can usually buy tools for these sellers for less than half of the initial cost and save even more money if you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take extra time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a couple added dollars on a inexpensive piece of equipment. The excess expense of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of crucial safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this may end up being the most flexible instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be used to build an whole house. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your second job. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot just cut curves. It’s ideal for cutting holes in wood too like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you might discover your palm sander using just a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll find this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in wood pieces. {Start with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the maximum clamps which you could afford. You can get in touch with them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of your seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer you quick release mechanisms that enabled the consumer to quickly open and close the limbs with no dull handle rotation. The wood beamed surfaces on your vice will periodically require replacement. I prefer to use soft walnut in my vices that will not crush or damage lots of the different woods that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your shop you may not be using the tape in these lengths, the bigger tape measures offer more rigid tapes that will not flop around and slide off the ending of boards. Measuring when you’re by yourself will be a great deal easier, and of course, quality tape measures can endure for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding.

What is Woodworking? Woodwork Crafts – The Beginners Guide To Woodworking Building A Project Plan

Woodworking is known as the building or the production of objects out of wood. You can create a great deal of unique objects from woodworking and these items are often as big as gazebos or as small as wooden toys. However large or small your personal project maybe you will be quite likely to do that goal with woodworking. Additionally, woodworking has many personal as well as psychological benefits! In the following guide, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A good deal of people who like to work with their hands have turned that love into a profession through woodworking. People who build things out of wood are generally known keyword because carpenters. Carpenters can work on a variety of woodworking projects and occupation types. For example, some carpenters possess their carpentry business and these folks have the luxury to place their job hours. This benefit enables carpenters the chance to spend additional time with their own families and have less job stress. Raising kids is a very tough task regardless of what way you approach the endeavor! For a carpenter who possesses his or her own business, this job may not be as hard because that individual is going to have more time to be part of his or her child’s lifetime. By playing a bigger role in the life span of your child you will be having a larger influence on the type of character that child develops into, which is a massive concern for any loving parent. In addition to such benefits, carpentry may also have health benefits as well.

The Benefits of Woodworking Building A Project Plan

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically healthy is vital and keyword can help prevent the occurrence of various illnesses later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a number of different disorders.

Building A Project Plan, Do It Yourself Woodworking Saves Cash:

I feel like I paid way too much when I visit home improvement stores and purchase patio furniture, and I am certain that I’m not the only person that has felt like this! A successful small business owner once told me to always increase the sales price of a product to double everything you obtained it for. In this manner, you always have the option to decrease the product to 50 percent away and come out without getting any losses. This sounds like it may be exactly the exact same strategy that home improvement stores use in selling their wooden furniture products. Regardless, there is a way which you can get around paying the additional cash and that has to do with building it yourself. Luckily, there are several really good woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different project types. So, you can really build anything you need or see in any home improvement store. Doing something yourself does take a little bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Floor plan

In architecture and building engineering, a floor plan is a drawing to scale, showing a view from above, of the relationships between rooms, spaces, traffic patterns, and other physical features at one level of a structure.

Dimensions are usually drawn between the walls to specify room sizes and wall lengths. Floor plans may also include details of fixtures like sinks, water heaters, furnaces, etc. Floor plans may include notes for construction to specify finishes, construction methods, or symbols for electrical items.

It is also called a plan which is a measured plane typically projected at the floor height of 4 ft (1.2 m), as opposed to an elevation which is a measured plane projected from the side of a building, along its height, or a section or cross section where a building is cut along an axis to reveal the interior structure.

Video: Woodworking Tools