Building Stuff Out Of Wood | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re after because most of the ideas and projects Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually many things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice within this package quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it will be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his best to direct them in every possible way he could, through simple to comprehend textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

The Benefits of Woodworking Building Stuff Out Of Wood

Woodworking is one hobby that can also be a rewarding profession if you love to work together with your hands and construct beautiful pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Building Stuff Out Of Wood.

It requires time to become skilled in the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you’ll be able to create some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation when you have friends come over to see. They will ask: How can you create it? Where did you get the woodworking plans? Just how long did it take to finish the job? What kind of wood did you use? What kind of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you discuss your job, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Building Stuff Out Of Wood

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to begin in Woodworking? Building Stuff Out Of Wood.

Begin with a concept in mind of what you want to construct then get a really good woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for novices available for purchase from online woodworking merchants. A couple of woodworking program suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a few. Obviously, you can start out with as expansive a woodworking plan as you choose. However, the odds are if you begin using a little woodworking project initially, you’ll have a better prospect of keyword completing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking hardware, the quantity and type of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank buying a great deal of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry area to work and might need a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools , but the concept is to purchase the crucial hand and power tools that beginners will need. You can always add to your arsenal as you get experience!

Building Stuff Out Of Wood Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story on the best way best to improve your woodworking craft. Whether it’s showing you the way to apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Building Stuff Out Of Wood

If you’re a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be fun. If you do not have the right information, instruction, and ability, you might land up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Creating something new with your own hands is a special sense. Do not start a job if you are not interested, because this might land you in a terrible location.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start projects that you can finish. If you’re in the midst of some work, then it is better not to begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Building Stuff Out Of Wood

If you maintain those vital points in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you want to begin with. As a beginner, always select a job that has a very basic build up or a simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Building Stuff Out Of Wood

Tools are the ways whereby you can win the battle of woodworking. A lot of people think that power tools are requires. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you buy a hammer, always assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the marketplace. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you in advance woodworking. You can also buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Based on the type of job you want to complete, pricing can be determined. The easy the project, the less price it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it’s much better to fix a budget first on the tools, then keyword on the project. Buying the basic tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Directions

Instructions are among the principal things that every beginner should follow. It is like the woodworking Bible. Instructions guide is very simple to understand the procedure, what to do and the way to get it done. It keyword is a systematic manual for completing the project. Time also has a significant part in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword which can allow you to reach success is proper planning. With proper planning and a plan, it’s possible to achieve success immediately. If you understand the objective of woodworking, the item you need to build, the tools you require to possess and the typical time you can devote daily; then you’re all set to go.

Conclusion, Building Stuff Out Of Wood

All these strategies and instruction will make the woodworking projects and plans for novices quickly to complete. Always make sure you have all the essential tools, materials, space prepared. Keep the instructions for building a product handy. Proper strategy and preparation can help you to earn a great woodworking job for your property.

|

Starting Your First Woodworking Shop Building Stuff Out Of Wood

People when looking for a way to pass time or desire an alternative method to generate money they usually turn to a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very cautious when choosing which job to begin with because there are projects that may be too tough for a newbie. But don’t be concerned about that because we will give you guidelines on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you choose your project you have to be aware of whether you’ve got the available tools to work on that project. Try not to spend a lot of money on purchasing equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Building Stuff Out Of Wood

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will provide you time to research unique jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make mistakes and at any time learning about various jobs.
It’s extremely important you know more about the different kinds of wood available for creating jobs. Expect carpenters use different kinds of wood quality for decorating bits, learning which kind of wood they use will allow you to prepare the wood you’ll need for specific jobs you may want to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to satisfy your needs.

Building Stuff Out Of Wood practice makes perfect so be sure you practice your work every day if possible. Try out lots of designs utilizing various tools so that you can find the hang of using the tools. When starting out you can earn a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

The Benefits of Woodworking Building Stuff Out Of Wood

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal number of gear and equipment. A little home workshop can generate a wide array of simple projects which can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will do your woodworking, based on the size of your house, you may be able to create a dedicated space to your woodworking tasks. This might be a reserved place in your garage or on your basement. In some cases, a detached shed or outbuilding might be perfect to set up your first shop. A heated store detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the top levels of the home. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This can help minimize the problems of dust and noise, however based on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Building Stuff Out Of Wood

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they add more space to work in. Building Stuff Out Of Wood if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can stay in place from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and gear. In the start, establish a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the bench to home your hand power tools and a pegboard over the bench to hang additional equipment. Install a woodworking at one end of the bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Building Stuff Out Of Wood

The scope of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at the local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local advertisements. There are plenty of quality lightly used tools out there which belong to people who embarked on that one molding job around the home or received tools as gifts that they will never utilize. You can usually buy tools for these sellers for less than half of the original cost and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private people will take extra time and possibly travel expenses. Weigh the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The excess expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this may end up being the most versatile instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be used to construct an entire property. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your second project. After choosing the proper saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It’s perfect for cutting holes in timber also like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more flexible but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want in your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll find your palm sander with a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll find this grade of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a pair of the maximum clamps which you could spend. You may get in touch with them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your seat is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the user to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces in your vice will occasionally need replacement. I would rather use soft walnut in my vices which won’t crush or damage many of the various forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among your most frequently used tools. Purchase a good quality name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your shop you might not be using the tape at these spans, the bigger tape steps offer more rigid tapes which won’t flop around and slip off the ending of boards. Measuring when you are on your own will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from cheap home brands marketed as carpenter’s glue. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it is sensible to go with the very best. I have also discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Building Stuff Out Of Wood

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Topping out

In building construction, topping out (sometimes referred to as topping off) is a builders' rite traditionally held when the last beam (or its equivalent) is placed atop a structure during its construction. Nowadays, the ceremony is often parlayed into a media event for public relations purposes.[1] It has since come to mean more generally finishing the structure of the building, whether there is a ceremony or not.

The practice of "topping out" a new building can be traced to the ancient Scandinavian religious rite of placing a tree atop a new building to appease the tree-dwelling spirits displaced in its construction.[2] Long an important component of timber frame building,[3] it migrated initially to England and Northern Europe, thence to the Americas.

A tree or leafy branch is placed on the topmost wood or iron beam, often with flags and streamers tied to it. A toast is usually drunk and sometimes workers are treated to a meal. In masonry construction the rite celebrates the bedding of the last block or brick.

Video: Woodworking Projects