Carpenter Design | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because most of the ideas and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are in fact lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. Those who are only getting started will discover the thoughts and jobs in Ted’s package quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to locate any job of their choice in this package quite easily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large size. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available throughout the net. Ted has done his best to guide them in every possible way he could, through simple to comprehend textual instructions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You may always add to your arsenal as you gain experience!

Carpenter Design Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the authors in woodworking publications do a story on the best way to increase your woodworking craft. Whether it’s showing you the way to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Carpenter Design

If you’re a beginner and very enthusiastic about doing a DIY job for house afterward, woodworking could be fun. If you do not have the proper information, instruction, and ability, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have time and the correct tools. Having mentioned, there are a few essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Do not begin a project if you are not interested, because this might land you in a bad location.

2. Consider the primary reason for creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and examine the time that you have, before you start with a job.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it’s better not to start any project in any way.

How to Become a Master Woodworker From Your Own Home Carpenter Design

If you keep these vital points in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you wish to begin with. As a beginner, always select a project which has quite a basic construct up or a very simple construction. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always move into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Carpenter Design

Tools are the ways through which you can win the battle of woodworking. A lot of men and women think that power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available on the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it might make work simpler for you at a later stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed price on woodworking projects. Dependent on the type of project you want to finish, pricing can be determined. The easy the job, the less price it involves. However, at the beginning buying the tools will probably be a little hefty. Therefore, it is much better to fix a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material other than the timber ply.

Time and Directions

Directions are among the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is very simple to comprehend the process, what to do and how to get it done. It keyword is a systematic manual for completing the job. Time also has a significant role in the building of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success quickly. If you know the purpose of woodworking, then the thing you need to build, the resources you need to possess and the average time it’s possible to give every day; then you’re all set to go.

Conclusion, Carpenter Design

These strategies and instruction will create the woodworking projects and plans for novices fast to complete. Always ensure you have all the essential tools, materials, area prepared. Read the instructions for constructing an item handy. Proper strategy and preparation will allow you to earn a fantastic woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Carpenter Design

People if you’re looking for a way to pass time or want an alternate way to generate money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of projects one can think of. When starting out you have to be very cautious when choosing which job to start out with since there are jobs which may be too tough for a beginner. But do not be concerned about that because we are going to provide you tips on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, so before you choose your project you have to be aware of if you’ve got the available resources to work on that project. Try not to invest a lot of money on buying gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Carpenter Design

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will give you time to research unique jobs and learn a lot of things. That is why it’s important to spend less money when starting out so that you can afford to make errors and at any time learning about various projects.
It is extremely important you know about different types of wood available for creating jobs. Anticipate carpenters use different types of wood quality for decorating bits, learning what kind of wood they use will help you prepare the wood you’ll need for certain projects you may choose to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to satisfy your wants.

Carpenter Design practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts utilizing a variety of tools so that you can get the hang of using the tools. When starting out you may make a number of mistakes but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Carpenter Design

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum amount of gear and equipment. A little home workshop may generate a wide array of simple projects that can allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you will do your woodworking, based on the size of your home, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your very first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the top levels of the house. Another benefit of detached workshops is, clearly, the noise level. You can work without bothering the remainder of the family. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and noise, however based on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Carpenter Design

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Carpenter Design if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top gear can stay in position from project to project. If this installation is not impossible, at least try to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. In the beginning, set up a seat area where you are able to store and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Insert a sturdy shelf beneath the seat to house your hands power tools and a pegboard over the seat to hang other equipment. Install a woodworking at one end of the bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Carpenter Design

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in your regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. There are plenty of quality lightly used tools out there that belong to individuals who embarked on that one molding job around the home or received tools as gifts that they will never utilize. You can usually purchase tools for these sellers for less than half the original price and save even more money should you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require extra time and possibly travel expenses. Weigh out the benefits of traveling around town to save a couple added dollars on a inexpensive piece of gear. The extra expense of travel and time in these situations is generally justified when buying large ticket items like table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this may prove to be the most versatile tool in a startup workshop. In fact, in the hands of an expert, a power hand saw can be employed to construct an whole house. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your next project. After choosing the right saw install a quality blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid blade. These have a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut corners. It is ideal for cutting holes in timber too like manage slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through tough lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill piece to its potential slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll find that your palm sander with just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll find this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you could spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed at the end of your seat is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the consumer to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among your most frequently used tools. Buy a fantastic quality name brand tape measure with a wide tape typically from the 25-foot range. Even though in your shop you may not use the tape at these lengths, the larger tape measures provide more rigid tapes that won’t flop around and slip off the end of boards. Measuring when you are by yourself will be a lot simpler, and naturally, quality tape steps can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as compound angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The cost of glue through all your jobs is a little cost consideration. Therefore, it makes sense to go with the best. I have also found over the years that I get the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Carpenter Design

The peaceful gratification of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment in the most basic equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

The Carpenters

The Carpenters were an American vocal and instrumental duo consisting of siblings Karen (1950–1983) and Richard Carpenter (b. 1946).[a] They produced a distinct soft musical style, combining Karen's contralto vocals with Richard's arranging and composition skills. During their 14-year career, the Carpenters recorded ten albums, along with numerous singles and several television specials.

The siblings were born in New Haven, Connecticut, and moved to Downey, California, in 1963. Richard took piano lessons as a child, progressing to California State University, Long Beach, while Karen learned the drums. They first performed together as a duo in 1965 and formed the jazz-oriented Richard Carpenter Trio followed by the middle-of-the-road group Spectrum. Signing as Carpenters to A&M Records in 1969, they achieved major success the following year with the hit singles "(They Long to Be) Close to You" and "We've Only Just Begun". Subsequently, the duo's brand of melodic pop produced a record-breaking run of hit recordings on the American Top 40 and Adult Contemporary charts, and they became leading sellers in the soft rock, easy listening and adult contemporary music genres. The Carpenters had three number-one singles and five number-two singles on the Billboard Hot 100 and fifteen number-one hits on the Adult Contemporary chart, in addition to twelve top-10 singles. They have sold more than 90 million records worldwide, making them one of the best-selling music artists of all time. The duo toured continually during the 1970s, which put them under increased strain; Richard took a year off in 1979 after he had become addicted to Quaaludes, while Karen suffered from anorexia nervosa.

Their career together ended in 1983 when Karen died from heart failure brought on by complications of anorexia. Extensive news coverage surrounding these circumstances increased public awareness of eating disorders. Though the Carpenters were criticized for their clean-cut and wholesome conservative image in the 1970s, their music has since been re-evaluated, attracting critical acclaim and continued commercial success.

Video: Woodworking Projects