Carpentry Courses Near Me | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because all the ideas and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the right option. There are in fact lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People who are only getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to find any project of their choice within this package quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who purchase it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his very best to guide them in every conceivable way he could, through easy to comprehend textual directions, clear pictures and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools that beginners will need. You can always increase your toolbox as you get experience!

Carpentry Courses Near Me Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the writers in woodworking magazines do a story on how best to improve your woodworking craft. When it’s showing you how to apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Carpentry Courses Near Me

If you’re just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you may wind up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors you should remember, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t start a job if you’re not interested, because this might land you at a bad location.

2. Think of the main reason for creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start projects that you’re able to complete. If you are in the middle of a work, then it is wise not to start any project at all.

How to Become a Master Woodworker From Your Own Home Carpentry Courses Near Me

If you keep those vital points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you wish to begin with. As a beginner, always pick a project which has quite a basic construct up or a very simple structure. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Carpentry Courses Near Me

Tools are the means whereby you can win the battle of woodworking. A lot of people believe power tools are requires. But for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available in the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You might even purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for novices, but having it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking projects. Based on the type of project you would like to complete, pricing could be determined. The easy the project, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it is much better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you do not need to purchase any more material other than the wood ply.

Time and Instructions

Directions are among the principal things that every newcomer should follow. It’s like the woodworking Bible. Instructions guide is very easy to understand the process, what to do and the way to do it. It keyword is a systematic manual for finishing the project. Time also plays a significant part in the building of woodworking projects. Woodworking projects demand time and therefore it is crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to achieve success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, then the thing you want to build, the resources you need in order to possess and the average time you can give daily; then you’re all set to go.

Conclusion, Carpentry Courses Near Me

These tips and education is likely to create the woodworking projects and strategies for novices quickly to complete. Always make sure that you have all the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning can help you to make a great woodworking project for your home.

|

The Benefits of Woodworking Carpentry Courses Near Me

Folks if you’re looking for a way to pass time or want an alternate method to generate money they generally turn to a hobby that they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be very cautious when choosing which project to start out with since there are jobs that may be too tough for a beginner. But do not worry about that since we will provide you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your project you need to know if you’ve got the available resources to work on such a job. Try not to invest a lot of cash on buying equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Carpentry Courses Near Me

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will provide you time to research unique jobs and find out a lot of things. That’s why it’s very important to invest less money when starting out so that you can afford to make errors and at some time learning about various projects.
It’s extremely important you know about different kinds of wood available for creating projects. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what kind of wood they use can help you prepare the wood you’ll need for certain projects you may choose to pursue.
As soon as you understand the basics of wood choice and the usage of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to fulfill your wants.

Carpentry Courses Near Me practice makes perfect so make sure you practice your work every day if possible. Try out lots of layouts utilizing various tools so that you may get the hang of using the tools. When starting out you can earn a number of errors but with time you will learn how to correctly utilize them and produce quality projects.

|

The Benefits of Woodworking Carpentry Courses Near Me

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A small home workshop may produce a wide variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you’ll do your woodworking, based on the dimensions of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This might help minimize the difficulties of dust and sound, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Carpentry Courses Near Me

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Carpentry Courses Near Me if you can have a dedicated place for a workshop all the better. Floor gear and bench top equipment can stay in place from project to project. If this setup isn’t hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the start, set up a bench area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will let you work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools and a pegboard over the seat to hang other gear. Put in a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Carpentry Courses Near Me

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools in your regional construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find plenty of quality lightly used programs out there which belong to people who stumbled on that one molding job around the home or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for less than half the original cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and possibly travel expenses. Weigh out the benefits of traveling around town to save a few extra bucks on a inexpensive piece of gear. The extra cost of travel and time in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite brand name, this can prove to be the most flexible instrument in a startup workshop. In reality, in the hands of an expert, a power hand saw could be used to build an whole property. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut curves. It’s ideal for cutting holes in wood also like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander with just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Start with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a few years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a set of the maximum clamps which you could afford. You can contact them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed in the end of the seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the user to quickly open and close the jaws with no tedious handle turning. The timber clamping surfaces on your vice will occasionally need replacement. I would rather utilize soft pine in my vices which will not crush or damage many of the different forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape typically in the 25-foot range. Even though in your store you may not use the tape at these spans, the larger tape steps offer more rigid tapes which won’t flop around and slide off the end of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape measures can last for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The cost of adhesive through all of your jobs is a minor cost consideration. For that reason, it is sensible to decide on the very best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Carpentry Courses Near Me

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Bush carpentry

Bush carpentry is an expression used in Australia and New Zealand that refers to improvised methods of building or repair, using available materials and an ad hoc design, usually in a pioneering or rural context.

The phrase 'bush carpentry' is a familiar Australian usage, but finding an exact description of its practice is rare. The Macquarie Dictionary for example, defines a bush carpenter as a rough amateur carpenter,[1] and G. A. Wilkes says he is a rough and ready carpenter.[2] The Macquarie in turn defines rough-and-ready as rough, rude or crude, but good enough for the purpose.[3] Wannan says that a bush carpenter is 'a very rough, unorthodox artisan indeed', and includes a sardonic excerpt from Henry Lawson to exemplify it.[4] In his Bushcraft series Ron Edwards describes hut and furniture building, and 'stockcamp architecture', without once using the phrase 'bush carpentry', though 'rough and ready' recurs. Tocal Agricultural College offers a course in 'Traditional bush timber construction';[5] The word 'traditional' appears six times in the course outline, but not 'bush carpentry'.[n. 1]

A similar and familiar phrase is traditional bush carpentry; this implies that its principles are well-known, but informally transmitted. Like folk music, bush carpentry exists within an oral and demotic culture, and is often undocumented. The tradition of Australian inventiveness, however, has an extensive literature:

Video: Woodworking Projects