Carpentry Services | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because most of the ideas and projects Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are actually many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice within this package quite readily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it will be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large size. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found throughout the net. Ted has done his best to direct them in every possible way he can, through easy to understand textual directions, clear images and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

The Benefits of Woodworking Carpentry Services

Woodworking is one hobby that could also be a rewarding profession if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Carpentry Services.

It takes time to become skilled at the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will have the ability to create some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It’ll be a topic of conversation when you have friends come over to visit. They’ll ask: How can you create it? Just how long can it take to finish the job? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a sense of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Carpentry Services

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Carpentry Services.

Begin with an idea in mind of what you would like to build then get a excellent woodworking project plan that’s geared toward beginners. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. A few woodworking plan suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Of course, you can begin with as expansive a woodworking program as you choose. On the other hand, the chances are if you begin with a little woodworking job initially, you’ll have a better prospect of keyword finishing the job.

Your woodworking project plan should include some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to complete the project. Note: A word of warning about buying woodworking tools. Just buy what you want to complete your immediate or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not use all that frequently. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry area to work and may require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools that beginners will need. You can always increase your toolbox as you get experience!

Carpentry Services Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Each month the authors in woodworking publications do a story about how best to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Carpentry Services

If you’re just beginning and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you do not have the right information, education, and ability, you might wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Do not begin a job if you’re not interested, as this may land you at a terrible location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of this item you are making.

3. Consider your abilities and examine the time you have, until you begin with a project.

4. Start projects which you can complete. If you’re in the middle of some work, then it is better to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Carpentry Services

If you maintain these essential things in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to start with. As a beginner, always select a project which has quite a basic construct up or a simple structure. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Carpentry Services

Tools are the ways through which you can win the struggle of woodworking. Many men and women think that power tools are requires. But for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there in the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you in advance woodworking. You can even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Dependent on the sort of job that you would like to finish, pricing could be set. The easy the job, the less price it involves. However, at the beginning buying the tools will be a little hefty. Because of this, it is better to fix a budget on the tools, then keyword on the project. Purchasing the basic tools will make certain you don’t need to purchase any more material aside from the wood ply.

Time and Instructions

Directions are among the primary things that every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and the way to do it. It keyword is a systematic guide for completing the job. Time also plays an important role in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to achieve success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, the thing that you want to construct, the tools you need to own and the average time it’s possible to devote daily; then you’re all set to go.

Conclusion, Carpentry Services

All these strategies and instruction is likely to make the woodworking projects and strategies for novices fast to finish. Always ensure you have all the vital tools, materials, space prepared. Read the instructions for constructing a product handy. Proper strategy and planning can allow you to make a great woodworking job for your property.

|

Starting Your First Woodworking Shop Carpentry Services

People if you’re trying to find a way to pass time or want an alternate method to generate money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can think of. When starting out you have to be quite careful when choosing which job to start out with since there are projects that can be too tough for a beginner. But do not be concerned about that because we will provide you tips on the right way to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you choose your job you need to be aware of if you’ve got the available resources to work on such a project. Try not to invest a lot of money on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Carpentry Services

Woodworking at home will give you time to research unique projects and learn so many things. That’s why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about various jobs.
It is very important that you know about the different kinds of wood available for creating projects. Expect carpenters utilize several types of wood quality for decorating bits, learning what kind of wood that they use will allow you to prepare the wood you will need for certain projects you might choose to pursue.
Once you understand the basics of wood choice and the use of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to satisfy your needs.

Carpentry Services practice makes perfect so make sure you practice your work every day if at all possible. Try out lots of designs using a variety of tools so that you may get the hang of using the tools. When starting out you can make a number of errors but with time you will learn how to correctly utilize them and produce quality projects.

|

The Benefits of Woodworking Carpentry Services

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of tools and equipment. A little home workshop may generate a broad variety of simple projects which will help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you’ll perform your woodworking, based on the dimensions of your house, you might have the ability to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to set up your first store. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This might help minimize the problems of dust and noise, however based on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Carpentry Services

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Carpentry Services if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can remain in place from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, set up a seat area where you can store and use the majority of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the bench to home your hands power tools along with a pegboard over the seat to hang additional gear. Install a woodworking vice at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Carpentry Services

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then purchase your quality tools in the regional construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local ads. There are plenty of quality gently used programs out there that belong to people who embarked on that 1 molding project around the home or received tools as gifts which they will never use. You can usually buy tools for these sellers for under half of the original price and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will take extra time and possibly travel expenditures. Weigh out the advantages of traveling around town to save a couple added dollars on a cheap piece of gear. The extra expense of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet produced sophisticated and complex pieces. Focus on developing your abilities with your startup set of tools and avoid lamenting about the gear you wished you’d.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to elevated sound levels. Select effective hearing protection that you find comfortable and effective. These can include earplugs or complete ear keyword muff protectors. I find a quality set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this can prove to be the most flexible tool in a startup workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an entire property. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your second job. After selecting the proper saw install a quality blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t only cut curves. It’s perfect for cutting holes in timber too like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in wood bits. {Begin with a typical number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a pair of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a set of the maximum clamps that you can spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enabled the consumer to rapidly open and close the limbs with no tedious handle rotation. The timber beamed surfaces in your vice will periodically need replacement. I would rather use soft pine in my vices that won’t crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Buy a good excellent name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your shop you might not be using the tape at these spans, the larger tape steps offer more rigid tapes which won’t flop around and slip off the end of boards. Assessing when you are by yourself will be a lot simpler, and of course, quality tape steps can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the right angles as well as compound angles. Get the number three and two Robertson set. I find the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes along the way.

Adhesives: Not all glues are made equal. Avoid cheap house brands sold as carpenter’s glue. The cost of adhesive through all your projects is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have discovered over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Carpentry Services

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary tools and equipment, everyone can learn the profitable skills of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Carpentry

Carpentry is a skilled trade and a craft in which the primary work performed is the cutting, shaping and installation of building materials during the construction of buildings, ships, timber bridges, concrete formwork, etc. Carpenters traditionally worked with natural wood and did the rougher work such as framing, but today many other materials are also used[1] and sometimes the finer trades of cabinetmaking and furniture building are considered carpentry. In the United States, 98.5% of carpenters are male, and it was the fourth most male-dominated occupation in the country in 1999. In 2006 in the United States, there were about 1.5 million carpentry positions. Carpenters are usually the first tradesmen on a job and the last to leave.[2] Carpenters normally framed post-and-beam buildings until the end of the 19th century; now this old fashioned carpentry is called timber framing. Carpenters learn this trade by being employed through an apprenticeship training—normally 4 years—and qualify by successfully completing that country's competence test in places such as the United Kingdom, the United States, Australia and South Africa. It is also common that the skill can be learned by gaining work experience other than a formal training program, which may be the case in many places.

The word "carpenter" is the English rendering of the Old French word carpentier (later, charpentier) which is derived from the Latin carpentarius [artifex], "(maker) of a carriage.[3] The Middle English and Scots word (in the sense of "builder") was wright (from the Old English wryhta, cognate with work), which could be used in compound forms such as wheelwright or boatwright.[4]

In the UK, carpentry is more correctly used to describe the skill involved in first fixing of timber items, such as construction of roofs, floors and timber framed buildings, i.e., those areas of construction that are normally hidden in a finished building. An easy way to envisage this is that first fix work is all that is done before plastering takes place. Second fix is done after plastering takes place. Second fix work, the construction of items such as skirting boards, architraves, and doors also comes under carpentry. Carpentry is also used to construct the formwork into which concrete is poured during the building of structures such as roads and highway overpasses. In the UK, the skill of making timber formwork for poured, or in situ, concrete, is referred to as shuttering.

Video: Woodworking Projects