Cedar Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are after because all the thoughts and jobs Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the thoughts and jobs in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will be able to locate any project of their choice in this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that are available across the net. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools which novices will need. You may always increase your toolbox as you gain experience!

Cedar Woodworking Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the writers in woodworking publications do a story on the best way best to improve your woodworking craft. When it is showing you how you can apply an end to a finished job, or how to make a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Cedar Woodworking Projects

If you are just beginning and very enthusiastic about doing a DIY job for home then, woodworking could be interesting. If you don’t have the proper information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a beginner woodworker, you want to have time and the correct tools. Having mentioned, there are a couple of essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your own hands is a special sense. Don’t begin a project if you are not interested, as this may land you at a bad place.

2. Think of the primary reason behind creating this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start projects that you’re able to finish. If you are in the middle of a work, then it’s wise to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Cedar Woodworking Projects

If you keep these vital things in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects you want to begin with. As a beginner, always select a project which has quite a basic build up or a simple structure. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Cedar Woodworking Projects

Tools are the ways through which you will win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you purchase a hammer, always assess the balance between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can also buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Dependent on the sort of project that you would like to complete, pricing could be set. The simple the job, the less price it involves. However, at the beginning buying the tools will be a little hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the project. Purchasing the basic tools will make certain you don’t need to purchase any more material aside from the wood ply.

Time and Instructions

Directions are one of the primary things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to comprehend the procedure, what to do and the way to do it. Time also has a significant role in the construction of woodworking projects. Woodworking projects demand time and so it is necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword that can help you to achieve success is proper planning. With appropriate planning and a strategy, it is possible to achieve success immediately. If you know the purpose of woodworking, the item you want to construct, the tools you require in order to own and the average time you can give daily; then you’re all set to go.

Conclusion, Cedar Woodworking Projects

These strategies and instruction will make the woodworking projects and strategies for beginners fast to finish. Always ensure you have all the essential tools, materials, space ready. Read the instructions for constructing a product handy. Proper strategy and planning will allow you to make a great woodworking job for your property.

|

The Benefits of Woodworking Cedar Woodworking Projects

People when looking for a way to pass time or want an alternative way to generate money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be very cautious when choosing which job to begin with since there are projects that can be too difficult for a beginner. But do not worry about that because we will provide you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your project you need to know whether you’ve got the available resources to work on that job. Try not to spend a lot of money on buying equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Cedar Woodworking Projects

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research unique projects and find out a lot of things. That is why it’s important to spend less money when starting out so that you can afford to make errors and at some time learning about different jobs.
It is extremely important that you know more about different types of wood available for creating jobs. Expect carpenters utilize different types of wood quality for decorating bits, learning what type of wood they use can help you prepare the wood you will need for specific projects you might choose to pursue.
Once you know the basics of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good projects to satisfy your needs.

Cedar Woodworking Projects practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs using a variety of tools so you can find the hang of working with the tools. When starting out you can make a range of errors but with time you will find out how to correctly use them and produce quality projects.

|

The Benefits of Woodworking Cedar Woodworking Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a wide variety of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you will perform your woodworking, Depending on the size of your house, you may have the ability to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the top levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the rest of the household. A fantastic compromise could be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Cedar Woodworking Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Cedar Woodworking Projects if you can have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, set up a seat area where you can shop and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to home your hands power tools along with a pegboard over the bench to hang additional equipment. Put in a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Cedar Woodworking Projects

The scope of your start-up equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools at the local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. There are plenty of quality lightly used tools out there which belong to people who embarked on that one molding job around the house or obtained tools as gifts that they won’t ever utilize. You can usually purchase tools for all these sellers for under half of the original price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and possibly travel expenditures. Weigh the benefits of traveling across town to save a couple added bucks on a inexpensive piece of gear. The excess cost of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal quantity of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this may prove to be the most versatile instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw can be used to construct an whole property. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next project. After selecting the right saw install a quality blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It is perfect for cutting holes in wood too like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t need in your workshop. Purchase an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents occur. Even though the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will probably update to a floor model disk and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll find that your palm sander with a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a few years to collect a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the maximum clamps that you could afford. You may contact them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the jaws without tedious handle rotation. The timber beamed surfaces in your vice will occasionally need replacement. I would rather utilize soft pine in my vices that won’t crush or damage lots of the different forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most often used tools. Buy a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your store you might not be using the tape at these lengths, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the ending of boards. Measuring when you are by yourself will be a lot simpler, and of course, quality tape steps can endure for several years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I find that the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes on the way.

Adhesives: Not many glues are made equal. Stay away from cheap home brands marketed as carpenter’s glue. The cost of glue through all your projects is a minor cost consideration. Therefore, it makes sense to go with the best. I also have discovered over time that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Cedar Woodworking Projects

The peaceful satisfaction of woodworking is a wonderful adventure in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects