Christmas Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they are after because all the thoughts and projects Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking source.

Many may still seem unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step-by-step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to locate any project of their choice in this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found across the net. Ted has done his best to guide them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools that novices will need. You can always add to your arsenal as you gain experience!

Christmas Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Each month the writers in woodworking magazines do a story about how to improve your woodworking craft. When it is showing you how to apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Christmas Wood Projects

If you are just beginning and very interested in doing a DIY job for home afterward, woodworking can be fun. If you don’t have the proper information, education, and ability, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a few essential factors you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Don’t start a job if you are not interested, because this might land you in a bad place.

2. Consider the main reason for making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, until you start with a job.

4. Start projects which you can complete. If you are in the midst of a work, then it’s better not to begin any project at all.

Starting Your First Woodworking Shop Christmas Wood Projects

If you maintain these essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a beginner, always pick a job which has quite a basic construct up or a very simple structure. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always proceed to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Christmas Wood Projects

Tools would be the means through which you will win the battle of woodworking. Many men and women believe power tools are requires. However, for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much easy for you. When you buy a hammer, always check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws out there in the marketplace. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might even buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but using it would make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the task much simple.

8. Additional small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking jobs. Dependent on the type of project that you want to complete, pricing could be set. The simple the job, the less cost it involves. However, at the beginning buying the tools will probably be a little hefty. Therefore, it is better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t need to buy any more material aside from the timber ply.

Time and Instructions

Directions are one of the principal things that every newcomer should follow. Instructions guide is very simple to comprehend the procedure, what to do and how to get it done. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to achieve success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, then the thing you need to construct, the tools you need in order to own and the typical time you can give every day; then you’re all set to go.

Conclusion, Christmas Wood Projects

These tips and instruction is likely to make the woodworking projects and strategies for novices quickly to finish. Always ensure that you have all the essential tools, materials, area prepared. Keep the instructions for constructing a product handy. Proper strategy and planning will allow you to earn a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Christmas Wood Projects

People when trying to find a way to pass time or desire an alternative way to make money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite cautious when choosing which project to start out with since you will find jobs which can be too difficult for a newbie. But do not worry about that because we will provide you guidelines on the right way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, so before you choose your project you have to be aware of if you have the available tools to work on such a job. Try not to invest a lot of money on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Christmas Wood Projects

Woodworking in your home will give you time to research unique projects and find out so many things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different projects.
It is very important that you know more about different kinds of wood available for creating projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you will need for certain projects you may want to pursue.
As soon as you know the basics of wood selection and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Christmas Wood Projects practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so you can find the hang of using the tools. When starting out you may make a number of errors but with time you will learn how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Christmas Wood Projects

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop can generate a wide array of simple projects which will allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you will do your woodworking, based on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the sound level. You can work without disturbing the remainder of the family. A fantastic compromise could be the garage of your property.

This can help decrease the problems of dust and noise, however depending on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Christmas Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Christmas Wood Projects if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can remain in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, set up a seat area where you are able to shop and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf below the seat to home your hand power tools and a pegboard over the bench to hang additional equipment. Put in a woodworking at one end of the bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Christmas Wood Projects

The scope of your start-up equipment will be mostly based on your budget. Whether you have got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools at your regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other regional ads. You will find an abundance of quality lightly used tools out there that belong to people who embarked on that one molding job around the house or obtained tools as presents that they won’t ever utilize. You can usually buy tools for all these sellers for under half of the original cost and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenses. Weigh the advantages of traveling across town to save a few added bucks on a cheap piece of gear. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together if you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when subjected to high sound levels. Select powerful hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this may end up being the most versatile instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an entire property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you start your second job. After choosing the right saw put in a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut corners. It’s ideal for cutting holes in wood also like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want in your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you might find your palm sander with just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a couple of years to collect a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you can spend. You can contact them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the consumer to quickly open and close the limbs with no dull handle rotation. The timber clamping surfaces in your vice will periodically need replacement. I prefer to use soft pine in my vices that will not crush or damage many of the various woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Buy a good excellent name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your shop you may not be using the tape in these spans, the bigger tape steps provide more rigid tapes that will not flop around and slide off the ending of planks. Measuring when you are by yourself will be a great deal simpler, and naturally, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of adhesive through all your jobs is a little cost consideration. For that reason, it makes sense to decide on the very best. I also have found over the years that I get the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Christmas Wood Projects

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested avocation and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Evan Rachel Wood

Evan Rachel Wood[1] (born September 7, 1987)[2] is an American actress, model, and musician. She began acting in the 1990s, appearing in several television series, including American Gothic (1995–96) and Once and Again (1999–2002). Wood made her debut as a leading film actress at the age of eleven in Digging to China (1998) and garnered acclaim for her Golden Globe-nominated role as the troubled teenager Tracy Freeland in the teen drama film Thirteen (2003).[3]

Wood continued acting mostly in independent films, including Pretty Persuasion (2005), Down in the Valley (2005), Running with Scissors (2006), and in the big studio production Across the Universe (2007). Since 2008, Wood has appeared in more mainstream films, including The Wrestler (2008), Whatever Works (2009) and The Ides of March (2011). She also returned to television, playing the supporting role of Queen Sophie-Anne on True Blood from 2009 to 2011 and playing the daughter of Mildred Pierce in the HBO miniseries Mildred Pierce (2011), for which she was nominated for the Golden Globe and Emmy Award for Best Supporting Actress. As of 2016[update], she plays the sentient android Dolores Abernathy in the HBO series Westworld, for which she won a Critics' Choice Award and earned a Golden Globe and Emmy Award nominations.

Wood was born in Raleigh, North Carolina. Her mother, Sara Lynn Moore, is an actress, director, and acting coach, who converted to Judaism.[4][5] Her father, Ira David Wood III, is a locally prominent actor, singer, theater director, playwright, and from a Christian family; he is the Executive Director of a local regional theatre company called Theatre in the Park.[6][7] Wood's brother, Ira David Wood IV, is also an actor; she has two other brothers, Dana and Thomas, and a sister named Aden. Her paternal aunt, Carol Winstead Wood, was a Hollywood production designer.[8]

Video: Woodworking Projects