Cool Carpentry Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re following because all the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more challenging to make the ideal option. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are only getting started will discover the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step directions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will be able to find any job of their choice in this package quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it will be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to guide them in every possible way he could, through simple to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it’s certainly worth buying!

The Benefits of Woodworking Cool Carpentry Ideas

Woodworking is one hobby that could also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Cool Carpentry Ideas.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will have the ability to create some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It will be a topic of conversation whenever you have friends come over to visit. They’ll ask: How can you create it? How long can it take to finish the job? What type of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Cool Carpentry Ideas

If you are thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Cool Carpentry Ideas.

Begin with a concept in your mind of what you want to build then get a excellent woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. A couple of woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Obviously, you can start out with as grand a woodworking program as you choose. However, the chances are if you begin using a small woodworking project initially, you will have a better prospect of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and type of wood required, and the essential hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking gear, but you can easily break the bank buying a lot of tools you may not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry place to work and might need a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools that beginners will need. You can always increase your arsenal as you get experience!

Cool Carpentry Ideas Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking publications do a story about the best way best to increase your woodworking craft. When it’s showing you the way you can apply a finish to a finished job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Cool Carpentry Ideas

If you’re a beginner and very interested in doing a DIY project for home then, woodworking could be fun. If you do not have the proper information, instruction, and skill, you may wind up spending more time and money than you originally intended to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential factors that you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Making something new with your hands is a special sense. Don’t begin a project if you are not interested, as this may land you at a terrible place.

2. Consider the main reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start projects that you’re able to finish. If you are in the midst of some work, then it is better not to begin any project in any way.

The Benefits of Woodworking Cool Carpentry Ideas

If you keep those essential things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to start with. As a newcomer, always select a job that has quite a basic build up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so you have a better comprehension of working with woods and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Cool Carpentry Ideas

Tools would be the means through which you will win the battle of woodworking. A lot of people believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the marketplace. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You might even buy keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this is not a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Dependent on the sort of job that you want to finish, pricing can be set. The simple the job, the less price it involves. But at the very beginning purchasing the tools will probably be a little hefty. Therefore, it’s much better to resolve a budget first on the resources, then keyword on the project. Buying the fundamental tools will ensure that you do not have to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the principal things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is very simple to understand the process, what to do and the way to get it done. Time also has an important part in the construction of woodworking jobs. Woodworking projects require time and so it is crucial for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that can allow you to achieve success is proper planning. With proper planning and a plan, it is possible to achieve success quickly. If you understand the purpose of woodworking, then the item you want to build, the tools you need in order to possess and the typical time you can devote daily; then you’re all set to go.

Conclusion, Cool Carpentry Ideas

All these tips and education will make the woodworking projects and strategies for novices fast to finish. Always make sure that you have all of the vital tools, materials, space ready. Read the instructions for constructing an item handy. Proper strategy and planning can help you to earn a fantastic woodworking project for your home.

|

The Benefits of Woodworking Cool Carpentry Ideas

People when looking for a way to pass time or desire an alternative method to make money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be quite careful when choosing which project to begin with because there are projects which can be too tough for a beginner. But do not be concerned about that because we are going to provide you tips on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your job you have to be aware of whether you’ve got the available tools to work on that project. Try not to spend a good deal of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no gap between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Cool Carpentry Ideas

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking in your home will provide you time to explore different jobs and learn a lot of things. That’s why it’s important to invest less money when starting out so you can afford to make errors and at some time learning about various projects.
It’s extremely important you know about different types of wood available for making projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which kind of wood that they use can help you prepare the wood you’ll need for specific jobs you might want to pursue.
As soon as you know the basics of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to fulfill your wants.

Cool Carpentry Ideas practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts utilizing various tools so that you can find the hang of using the tools. When starting out you may earn a range of errors but with time you will find out how to properly use them and produce quality projects.

|

The Benefits of Woodworking Cool Carpentry Ideas

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of gear and equipment. A little home workshop may produce a wide variety of simple projects that will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll do your woodworking, Depending on the size of your home, you may be able to create a dedicated space to your woodworking activities. This might be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Cool Carpentry Ideas

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Cool Carpentry Ideas if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and gear. At the start, set up a bench area where you are able to store and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. That will let you work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools along with a pegboard over the seat to hang additional equipment. Install a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Cool Carpentry Ideas

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools in the regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. There are an abundance of quality lightly used tools out there that belong to people who embarked on that 1 molding job around the house or received tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for under half of the original price and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a few extra bucks on a cheap piece of gear. The extra expense of time and travel in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect safety. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this may prove to be the most versatile tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be used to construct an entire house. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After selecting the right saw install a quality blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut curves. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want in your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you might discover that your palm sander using a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and correct any imperfections in timber pieces. {Start with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it usually takes the beginner woodworker a couple of years to collect a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a set of the maximum clamps that you could afford. You can contact them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to rapidly open and close the jaws without dull handle rotation. The timber clamping surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among your most often used tools. Purchase a good excellent name brand tape measure with a wide tape usually in the 25-foot range. Even though in your store you may not use the tape in these lengths, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the ending of planks. Measuring when you’re by yourself will be a great deal easier, and of course, quality tape measures can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will help you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I find the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes along the way.

Adhesives: Not many glues are created equal. Avoid inexpensive house brands marketed as carpenter’s glue. The expense of adhesive through all of your projects is a little cost consideration. For that reason, it makes sense to go with the best. I also have found over time that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Cool Carpentry Ideas

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, everyone can learn the rewarding abilities of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Extreme Makeover: Home Edition

Extreme Makeover: Home Edition (EM:HE; sometimes informally referred to as Extreme Home Makeover[2][3]) is an American reality television series providing home improvements for less fortunate families and community schools. The show was hosted by former model, carpenter and veteran television personality Ty Pennington.

Each episode features a family that has faced some sort of recent or ongoing hardship such as a natural disaster or a family member with a life-threatening illness, in need of new hope. The show's producers coordinate with a local construction contractor, which then coordinates with various companies in the building trades for a makeover of the family's home. This includes interior, exterior and landscaping, performed in seven days while the family is on vacation (paid for by the show's producers) and documented in the episode. If the house is beyond repair, they replace it entirely. The show's producers and crew film set and perform the makeover but do not pay for it. The materials and labor are donated. Many skilled and unskilled volunteers assist in the rapid construction of the house.

EM:HE is considered a spin-off of Extreme Makeover, an earlier series providing personal makeovers (often including plastic surgery) to selected individuals. Unusual for a spin-off, Home Edition outlasted its mother show by several seasons. This show displays extreme changes to help recreate someone's space. However, the format differs considerably; in the original Extreme Makeover, for instance, participants were not necessarily chosen based on any recent hardship, whereas the family's backstory is an important component of Home Edition. EM:HE also has similarities to other home renovation series such as Trading Spaces, on which Pennington was previously a key personality.

Video: Woodworking Projects