Cool Easy Woodshop Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are following because all the thoughts and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. People who are just getting started will discover the thoughts and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to find any job of their choice within this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large dimensions. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker might be considering constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found across the internet. Ted has done his very best to direct them in every possible way he could, through easy to understand textual directions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the essential hand and power tools that beginners will need. You may always add to your toolbox as you get experience!

Cool Easy Woodshop Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way to increase your woodworking craft. Whether it is showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Cool Easy Woodshop Projects

If you’re just beginning and very interested in doing a DIY project for home afterward, woodworking could be fun. If you don’t have the proper information, education, and skill, you might wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential factors that you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Don’t start a job if you are not interested, as this may land you at a bad place.

2. Think of the primary reason behind making this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start projects that you’re able to finish. If you’re in the midst of some work, then it is better not to begin any project at all.

Starting Your First Woodworking Shop Cool Easy Woodshop Projects

If you maintain those essential points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs you want to begin with. As a newcomer, always pick a project that has a very basic build up or a simple construction. A few simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always move to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Cool Easy Woodshop Projects

Tools would be the ways through which you can win the struggle of woodworking. A lot of men and women believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might also buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking projects. Dependent on the type of job you would like to finish, pricing could be set. The easy the project, the less price it involves. But at the beginning purchasing the tools will probably be a little hefty. Therefore, it’s better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t need to purchase any more material other than the timber ply.

Time and Instructions

Directions are among the primary things that every beginner should follow. It is like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also plays an important part in the construction of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most indispensable thing keyword that can allow you to achieve success is proper planning. With proper planning and a strategy, it is likely to achieve success immediately. If you understand the objective of woodworking, then the item that you want to build, the resources you need to possess and the average time you can give daily; then you’re all set to go.

Conclusion, Cool Easy Woodshop Projects

These strategies and instruction is likely to make the woodworking projects and plans for novices fast to complete. Always make sure that you have all the vital tools, materials, space ready. Keep the instructions for building a product handy. Proper strategy and planning will allow you to earn a great woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Cool Easy Woodshop Projects

Folks when trying to find a way to pass time or desire an alternate method to generate money they generally turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be quite cautious when choosing which job to start out with since there are projects that may be too tough for a newbie. But do not worry about that because we will provide you guidelines on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to be aware of if you’ve got the available resources to work on such a job. Try not to spend a good deal of money on buying gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Cool Easy Woodshop Projects

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will give you time to explore unique jobs and learn a lot of things. That is why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about various projects.
It is extremely important that you know more about the different types of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning which type of wood that they use will help you prepare the wood you will need for certain jobs you may choose to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your needs.

Cool Easy Woodshop Projects practice makes perfect so make sure that you practice your work daily if possible. Try out lots of designs using a variety of tools so that you can get the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Cool Easy Woodshop Projects

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a wide variety of simple projects that can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you’ll perform your woodworking, Depending on the size of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved place in your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the upper levels of the house. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Cool Easy Woodshop Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to function in. Cool Easy Woodshop Projects if you can have a dedicated spot for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the beginning, establish a seat area where you can shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Insert a sturdy shelf below the seat to house your hand power tools along with a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Cool Easy Woodshop Projects

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools at your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality lightly used programs out there that belong to individuals who stumbled on that one molding job around the house or received tools as presents which they will never use. You can usually buy tools for all these sellers for under half the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private individuals will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling around town to save a few extra dollars on a cheap piece of gear. The extra expense of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this may prove to be the most flexible instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to build an entire property. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade. These possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut corners. It’s perfect for cutting holes in wood too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Buy an range of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents happen. Although the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might discover your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Begin with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you can afford. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the user to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces on your vice will periodically require replacement. I would rather utilize soft pine in my vices which won’t crush or damage many of the various forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your store you might not be using the tape in these spans, the larger tape measures offer more rigid tapes which won’t flop around and slide off the end of boards. Measuring when you’re on your own will be a lot easier, and of course, quality tape measures can last for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes along the way.

Adhesives: Not all glues are made equal. Avoid inexpensive home brands marketed as carpenter’s glue. The expense of glue through all your projects is a little cost consideration. Therefore, it is sensible to go with the very best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Cool Easy Woodshop Projects

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Even Stevens episodes

Video: Woodworking Tools