Cool Wood Patterns | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because all the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those who are only getting started will find the thoughts and jobs in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice within this package quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that are available throughout the internet. Ted has done his best to direct them in every possible way he could, through simple to understand textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Cool Wood Patterns

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to build all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Cool Wood Patterns.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to build some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living room. It will be a subject of conversation whenever you have friends come over to visit. They’ll ask: How can you create it? Just how long can it take to finish the project? What kind of tools did you use? How on earth did you create such a beautiful piece of furniture? As you discuss your job, a feeling of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Cool Wood Patterns

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Cool Wood Patterns.

Begin with an idea in mind of what you want to build then get a really good woodworking project plan that is geared toward beginners. There are numerous little woodworking projects for novices available for purchase from online woodworking merchants. Obviously, you can start out with as expansive a woodworking plan as you choose. On the other hand, the chances are if you start out with a little woodworking job at first, you will get a better prospect of keyword completing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and type of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking tools, but it is simple to break the bank buying a lot of tools you may not use all that often. If you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget that the wood glue and a brush to spread the wood glue! Obviously, you will need a dry area to work and might need a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that novices will need. You can always increase your arsenal as you gain experience!

Cool Wood Patterns Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the writers in woodworking publications do a story on how best to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Cool Wood Patterns

If you are just beginning and very enthusiastic about doing a DIY job for house then, woodworking can be interesting. If you don’t have the proper information, education, and skill, you may wind up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential aspects that you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Don’t start a job if you’re not interested, because this might land you in a terrible place.

2. Think of the main reason for creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and analyze the time you have, until you begin with a job.

4. Start projects which you’re able to complete. If you’re in the middle of some work, then it is wise to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Cool Wood Patterns

If you keep those essential things in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking projects you wish to start with. As a beginner, always pick a project that has quite a basic build up or a very simple structure. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always proceed into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Cool Wood Patterns

Tools would be the ways through which you can win the struggle of woodworking. Many men and women believe power tools are requires. However, for novices, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you buy a hammer, always check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws available on the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might even purchase keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking jobs. Based on the sort of job you want to complete, pricing could be determined. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it is much better to fix a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to purchase any more material other than the timber ply.

Time and Directions

Directions are among the principal things which every newcomer should follow. Instructions guide is very easy to understand the procedure, what to do and the way to do it. Time also plays a significant part in the building of woodworking projects. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword which will allow you to achieve success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success immediately. If you understand the objective of woodworking, then the item that you want to construct, the tools you need to possess and the typical time it’s possible to give every day; then you are ready to go.

Conclusion, Cool Wood Patterns

These strategies and education will make the woodworking projects and strategies for novices fast to complete. Always make sure you have all of the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can allow you to make a great woodworking project for your home.

|

Starting Your First Woodworking Shop Cool Wood Patterns

Folks if you’re looking for a way to pass time or desire an alternate way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be very careful when choosing which job to begin with because there are projects that can be too tough for a beginner. But do not be concerned about that because we will give you tips on the right means to start woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, therefore before you pick your job you need to be aware of if you’ve got the available tools to work on that project. Try not to invest a lot of money on buying gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any difference between the hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Cool Wood Patterns

Woodworking in your home will give you time to research different projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about different projects.
It is extremely important you know about different kinds of wood available for making projects. Anticipate carpenters utilize several types of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you will need for specific projects you may choose to pursue.
As soon as you understand the basics of wood selection and the use of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your needs.

Cool Wood Patterns practice makes perfect so be sure that you practice your work daily if possible. Try out lots of designs using a variety of tools so that you can find the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Cool Wood Patterns

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal amount of tools and equipment. A small home workshop can produce a broad variety of simple projects which will help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you will perform your woodworking, based on the dimensions of your home, you may have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields found in the cellar draw up dust into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the remainder of the family. A good compromise could be the garage of your home.

This might help decrease the problems of dust and sound, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Cool Wood Patterns

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Cool Wood Patterns if you can have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can remain in position from project to project. If this installation is not impossible, at least try to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and gear. At the beginning, set up a seat area where you are able to store and use the majority of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf below the bench to house your hands power tools along with a pegboard over the bench to hang other equipment. Put in a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Cool Wood Patterns

The scope of your start-up equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. There are an abundance of quality lightly used tools out there which belong to people who stumbled on that 1 molding project around the home or received tools as presents which they won’t ever utilize. You can usually buy tools for these sellers for under half the initial price and save even more money if you create a package deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and possibly travel expenditures. Weigh out the advantages of traveling around town to save a couple extra dollars on a cheap piece of equipment. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the favorite brand name, this may prove to be the most versatile instrument in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be employed to construct an entire property. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After choosing the right saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t just cut curves. It’s perfect for cutting holes in timber too like manage slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not want in your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Although the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for general work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover that your palm sander with a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra source of 100 grit paper. You’ll find that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in wood bits. {Begin with a standard number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure remains the same. Get a set of the maximum clamps which you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your seat is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the consumer to rapidly open and close the limbs without dull handle turning. The timber clamping surfaces in your vice will periodically need replacement. I would rather utilize soft walnut in my vices that will not crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of the most frequently used tools. Buy a good quality name brand tape measure with a wide tape typically in the 25-foot selection. Even though in your shop you may not use the tape at these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slip off the ending of planks. Measuring when you’re on your own will be a lot simpler, and naturally, quality tape measures can last for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I find the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of glue through all your projects is a minor cost consideration. Therefore, it is sensible to go with the best. I have also discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Cool Wood Patterns

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and enjoy job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Pattern (casting)

Patterns used in sand casting may be made of wood, metal, plastics or other materials. Patterns are made to exacting standards of construction, so that they can last for a reasonable length of time, according to the quality grade of the pattern being built, and so that they will repeatably provide a dimensionally acceptable casting.[3]

The making of patterns, called patternmaking (sometimes styled pattern-making or pattern making), is a skilled trade that is related to the trades of tool and die making and moldmaking, but also often incorporates elements of fine woodworking. Patternmakers (sometimes styled pattern-makers or pattern makers) learn their skills through apprenticeships and trade schools over many years of experience. Although an engineer may help to design the pattern, it is usually a patternmaker who executes the design[4]

Typically, materials used for pattern making are wood, metal or plastics. Wax and Plaster of Paris are also used, but only for specialized applications. Sugar pine is the most commonly used material for patterns, primarily because it is soft, light, and easy to work. Honduras Mahogany was used for more production parts because it is harder and would last longer than pine. Once properly cured it is about as stable as any wood available, not subject to warping or curling. Once the pattern is built the foundry does not want it changing shape. True Honduras Mahogany is harder to find now because of the decimation of the rain forests, so now there are a variety of woods marketed as Mahogany. Fiberglass and plastic patterns have gained popularity in recent years because they are water proof and very durable. Metal patterns are long lasting and do not succumb to moisture, but they are heavier, more expensive and difficult to repair once damaged.[5]

Video: Woodworking Projects