Cool Woodworking Tools | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they are after because all the ideas and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are actually many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People that are only getting started will find the ideas and jobs in Ted’s package quite simple. No doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s simple step by step directions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to locate any project of their choice within this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who purchase it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every possible way he can, through simple to comprehend textual directions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Cool Woodworking Tools Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking magazines do a story on how best to increase your woodworking craft. When it is showing you the way to apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Cool Woodworking Tools

If you are a beginner and very interested in doing a DIY job for home then, woodworking could be interesting. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential aspects you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t begin a job if you are not interested, as this may land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the item you are making.

3. Consider your abilities and analyze the time that you have, before you start with a project.

4. Start projects that you can complete. If you’re in the midst of some work, then it is wise to not start any project at all.

Starting Your First Woodworking Shop Cool Woodworking Tools

If you maintain those essential points in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to start with. As a newcomer, always pick a project that has quite a basic build up or a simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Cool Woodworking Tools

Tools are the ways through which you can win the struggle of woodworking. A lot of people believe power tools are requires. However, for beginners, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available in the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much simple.

8. Other small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed cost on woodworking jobs. Based on the sort of job you want to complete, pricing can be set. The simple the project, the less price it involves. However, at the very beginning buying the tools will be somewhat hefty. Therefore, it’s better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you do not have to purchase any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things that every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and how to get it done. It keyword is a systematic manual for completing the project. Time also has a significant part in the building of woodworking projects. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. But the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success quickly. If you know the purpose of woodworking, the thing that you want to build, the resources you need in order to own and the average time it’s possible to give daily; then you’re all set to go.

Conclusion, Cool Woodworking Tools

All these tips and instruction is likely to make the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all the vital tools, materials, area prepared. Keep the instructions for constructing a product handy. Proper strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Cool Woodworking Tools

Folks if you’re trying to find a way to pass time or want an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be very careful when choosing which job to start out with because there are projects that may be too tough for a beginner. But don’t worry about that because we will provide you tips on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you pick your project you need to be aware of whether you’ve got the available tools to work on such a project. Try not to invest a good deal of cash on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Cool Woodworking Tools

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to research unique jobs and learn so many things. That is why it’s important to spend less money when starting out so you can afford to make errors and at any time learning about various jobs.
It’s very important that you know about the different kinds of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating pieces, learning what type of wood they use can help you prepare the wood you’ll need for certain jobs you may want to pursue.
Once you know the fundamentals of wood choice and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your needs.

Cool Woodworking Tools practice makes perfect so be sure that you practice your work daily if possible. Try out lots of designs using a variety of tools so you can get the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to correctly use them and create quality projects.

|

Starting Your First Woodworking Shop Cool Woodworking Tools

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimum number of tools and equipment. A small home workshop can generate a broad array of simple projects that will help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you will do your woodworking, based on the size of your home, you might have the ability to produce a dedicated space to your woodworking activities. This might be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops is, of course, the noise level. You can work without bothering the remainder of the family. A good compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Cool Woodworking Tools

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Cool Woodworking Tools if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top gear can remain in place from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and gear. In the start, set up a seat area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the bench to home your hand power tools and a pegboard above the bench to hang other gear. Put in a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Cool Woodworking Tools

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. You will find plenty of quality gently used programs out there which belong to individuals who stumbled on that 1 molding project around the house or received tools as presents which they won’t ever use. You can usually buy tools for all these sellers for less than half the initial price and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenses. Weigh the benefits of traveling across town to save a few extra bucks on a cheap piece of equipment. The extra expense of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum amount of hand gear yet produced sophisticated and complex bits. Focus on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the popular name, this may end up being the most versatile instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw can be used to construct an entire house. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After selecting the proper saw install a quality blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid blade. These possess a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot only cut corners. It is perfect for cutting holes in wood too like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you’ll discover that your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in wood pieces. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a few years to accumulate a detailed set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a set of the maximum clamps that you can spend. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed at the end of your seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to quickly open and close the limbs with no dull handle turning. The timber clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft pine in my vices that will not crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good quality name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you may not use the tape in these lengths, the bigger tape measures provide more rigid tapes which won’t flop around and slip off the end of boards. Measuring when you are on your own will be a lot simpler, and of course, quality tape steps can last for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The cost of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to decide on the best. I also have found over time that I get the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Cool Woodworking Tools

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Garrett Wade

Garrett Wade is a family-owned business, established in 1975 and based in DUMBO, Brooklyn and Cincinnati, Ohio.[1] It sources and sells a range of high quality hand tools,[2] primarily for woodworking, gardening, and outdoor work, based on traditional designs.[3] It is best known for its tools used for woodworking. Garry Chinn is the founder and CEO of Garrett Wade.

In the spring of 1975, Garretson Wade Chinn mailed the first Garrett Wade[4] catalog. It contained primarily woodworking tools sourced from around the world, with particular focus on Europe. The goal of the catalog, along with media like Fine Woodworking Magazine, was to reconnect men to the experience of using their hands, as they had done in shop class as boys. In 1995, responding to decreasing demand for woodworking tools, the company expanded its product line to hand tools for homeowners,[5] with particular focus on gardening and outdoor tools. Recently, Garrett Wade also began researching, developing and manufacturing tools in-house.[6][7]

Today, Garrett Wade products compete with mass-produced tools from companies such as Stanley and Craftsman although their tools are generally more unique [9] than mainstream. They have sales of more than $10 million (USD) a year and approximately 220,000 customers. It continues to publish a catalog [10] but has also developed a substantial online business.

Video: Woodworking Tools