Curio Cabinet Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are just getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will have the ability to locate any job of their choice in this package quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large size. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available across the internet. Ted has done his very best to guide them in every possible way he could, through easy to understand textual instructions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools which novices will need. You can always increase your arsenal as you get experience!

Curio Cabinet Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking publications do a story about the best way to increase your woodworking craft. Whether it’s showing you the way you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Curio Cabinet Woodworking Plans

If you’re a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking can be fun. If you don’t have the right information, education, and skill, you may wind up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential factors you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a project if you’re not interested, as this may land you at a terrible location.

2. Think of the primary reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and analyze the time you have, before you start with a job.

4. Start projects that you’re able to complete. If you are in the middle of a work, then it is better to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Curio Cabinet Woodworking Plans

If you maintain those essential things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to begin with. As a beginner, always select a job which has a very basic construct up or a simple structure. Some easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so you have a better comprehension of working with woods and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Curio Cabinet Woodworking Plans

Tools are the means whereby you will win the struggle of woodworking. Many people believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you buy a hammer, always assess the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws available on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You can even buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for novices, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills will make the task much easy.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed price on woodworking projects. Dependent on the type of project you would like to finish, pricing could be determined. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will make certain you do not have to buy any more material aside from the wood ply.

Time and Directions

Instructions are one of the primary things that every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to understand the procedure, what to do and how to get it done. It keyword is a systematic manual for finishing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and therefore it is necessary for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to reach success is proper planning. With appropriate planning and a strategy, it is likely to achieve success quickly. If you understand the objective of woodworking, then the thing you need to build, the resources you need to possess and the average time it’s possible to give every day; then you are all set to go.

Conclusion, Curio Cabinet Woodworking Plans

All these strategies and education will make the woodworking projects and strategies for beginners fast to finish. Always make sure you have all the essential tools, materials, area ready. Read the instructions for building an item handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Curio Cabinet Woodworking Plans

People when looking for a way to pass time or desire an alternate way to make money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be very cautious when choosing which project to begin with since there are jobs that may be too difficult for a beginner. But do not be concerned about that because we are going to give you tips on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you choose your project you have to be aware of if you’ve got the available tools to work on that job. Try not to spend a lot of cash on purchasing gear when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Curio Cabinet Woodworking Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to explore different jobs and learn a lot of things. That is why it’s important to invest less money when starting out so that you can afford to make errors and at some time learning about various jobs.
It is extremely important that you know about the different kinds of wood available for making jobs. Expect carpenters utilize different kinds of wood quality for decorating bits, learning which kind of wood they use can allow you to prepare the wood you will need for certain projects you may choose to pursue.
Once you understand the fundamentals of wood choice and the use of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in creating good projects to fulfill your needs.

Curio Cabinet Woodworking Plans practice makes perfect so be sure you practice your work every day if possible. Try out a lot of layouts utilizing various tools so that you can get the hang of working with the tools. When starting out you may make a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Curio Cabinet Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimal amount of gear and equipment. A little home workshop can produce a wide variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you’ll do your woodworking, Depending on the dimensions of your house, you may have the ability to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably create dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the family. A good compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Curio Cabinet Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Curio Cabinet Woodworking Plans if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. In the beginning, establish a bench area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf below the bench to home your hand power tools and a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Curio Cabinet Woodworking Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in your regional building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. You will find an abundance of quality gently used programs out there that belong to people who stumbled on that 1 molding job around the home or obtained tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for under half the original price and save even more money if you create a package deal for all their unused equipment. Of course, getting tools from private individuals will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling around town to save a couple extra bucks on a inexpensive piece of equipment. The extra cost of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing them all together in the event that you find them uncomfortable.

The next piece of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw following the favorite brand name, this can prove to be the most flexible instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be used to build an whole property. Eventually, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you start your second job. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It’s ideal for cutting holes in timber too like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want on your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander using a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and correct any imperfections in wood bits. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle turning. The wood clamping surfaces in your vice will periodically require replacement. I would rather utilize soft pine in my vices which won’t crush or damage many of the different woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most often used tools. Purchase a good excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you may not be using the tape in these spans, the bigger tape steps provide more rigid tapes which will not flop around and slip off the ending of boards. Measuring when you are by yourself will be a great deal simpler, and naturally, quality tape steps can last for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles in addition to chemical angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes along the way.

Adhesives: Not all glues are created equal. Avoid inexpensive home brands sold as carpenter’s glue. The expense of adhesive through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the best. I have also found over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Curio Cabinet Woodworking Plans

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Video: Woodworking Projects