Custom Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re following because most of the ideas and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice in this package quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that can be found across the net. Ted has done his best to guide them in every possible way he can, through simple to understand textual instructions, clear pictures and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find inside. Therefore, it is definitely worth buying!

Starting Your First Woodworking Shop Custom Wood Projects

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and build beautiful pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Custom Wood Projects.

It requires time to become skilled at the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It will be a topic of conversation when you have friends come over to visit. They will ask: How can you create it? Where did you get the woodworking plans? How long can it take to complete the job? What kind of wood did you use? What kind of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you speak about your work, a sense of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Custom Wood Projects

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Custom Wood Projects.

Start with a concept in mind of what you would like to build and then get a excellent woodworking project plan that’s geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking retailers. A couple of woodworking program suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to mention a couple. Obviously, you can start out with as expansive a woodworking program as you choose. However, the chances are if you start out with a small woodworking job at first, you’ll have a better prospect of keyword finishing the job.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not use all that often. When you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood glue! Obviously, you’ll need a dry place to work and might need a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools that novices will need. You may always increase your arsenal as you get experience!

Custom Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Each month the writers in woodworking publications do a story on how to increase your woodworking craft. When it’s showing you the way to apply an end to a completed project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Custom Wood Projects

If you’re a beginner and very enthusiastic about doing a DIY job for home afterward, woodworking could be interesting. If you don’t have the proper information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential factors that you should remember, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be very interested in woodworking. Making something new with your hands is a special sense. Do not begin a project if you’re not interested, as this may land you in a bad place.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and examine the time you have, until you start with a job.

4. Start projects which you can finish. If you are in the midst of a work, then it is wise not to begin any project in any way.

Starting Your First Woodworking Shop Custom Wood Projects

If you keep these essential things in your mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you wish to begin with. As a beginner, always pick a job which has quite a basic construct up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always proceed into the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Custom Wood Projects

Tools would be the ways through which you will win the struggle of woodworking. Many people think that power tools are needs. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much easy for you. When you purchase a hammer, always assess the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You can even purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking projects. Dependent on the sort of job you would like to finish, pricing could be determined. The easy the project, the less cost it involves. But at the very beginning purchasing the tools will be somewhat hefty. Because of this, it is much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you do not have to buy any more material aside from the timber ply.

Time and Instructions

Directions are among the principal things which each and every newcomer should follow. Instructions guide is quite easy to understand the process, what to do and how to get it done. Time also has an important role in the construction of woodworking projects. Woodworking projects demand time and so it’s necessary for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword which will help you to achieve success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you understand the purpose of woodworking, the thing that you need to build, the resources you require to own and the average time it’s possible to give every day; then you are all set to go.

Conclusion, Custom Wood Projects

These strategies and instruction will make the woodworking projects and strategies for novices quickly to complete. Always make sure that you have all of the vital tools, materials, space prepared. Keep the instructions for constructing an item handy. Appropriate strategy and planning can help you to earn a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Custom Wood Projects

Folks when looking for a way to pass time or want an alternative method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be very cautious when choosing which job to begin with since there are projects which can be too tough for a beginner. But do not worry about that since we are going to give you guidelines on the right means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your job you need to be aware of whether you’ve got the available resources to work on such a job. Try not to invest a good deal of cash on buying equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand as well as the hands.

Starting Your First Woodworking Shop Custom Wood Projects

Woodworking at home will give you time to research unique jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It is very important that you know about different types of wood available for creating jobs. Anticipate carpenters use different types of wood quality for decorating bits, learning what type of wood they use will allow you to prepare the wood you’ll need for certain jobs you may want to pursue.
Once you know the fundamentals of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to fulfill your wants.

Custom Wood Projects practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of layouts utilizing various tools so you may get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Custom Wood Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum amount of gear and equipment. A small home workshop may generate a wide array of simple projects which can help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you’ll do your woodworking, based on the dimensions of your home, you might have the ability to create a dedicated space to your woodworking tasks. This may be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your very first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, of course, the noise level. You can work without bothering the rest of the family. A good compromise could be the garage of your property.

This can help decrease the difficulties of dust and sound, however depending on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Custom Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they include more space to function in. Custom Wood Projects if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, set up a bench area where you are able to shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard over the bench to hang other equipment. Put in a woodworking vice at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Custom Wood Projects

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools at your local construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. You will find plenty of quality lightly used programs out there that belong to individuals who stumbled on that 1 molding job around the house or received tools as gifts that they won’t ever use. You can usually purchase tools for all these sellers for under half the original price and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand equipment yet produced sophisticated and complex pieces. Focus on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uncomfortable.

The next piece of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to elevated noise levels. Last, wear a cap to keep the dust from your hair. With this set up I’m shielding my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw following the favorite brand name, this may prove to be the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to build an entire property. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your next job. After choosing the proper saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut curves. It is ideal for cutting holes in wood too like handle slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot at the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Even though the most frequent, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you might discover that your palm sander using a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll find this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in wood pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a couple of years to collect a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps that you can spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your bench is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the jaws without dull handle rotation. The timber clamping surfaces in your vice will periodically need replacement. I prefer to use soft pine in my vices that won’t crush or damage lots of the various forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a fantastic quality name brand tape measure with a wide tape typically from the 25-foot selection. Even though in your store you might not be using the tape in these spans, the bigger tape steps provide more rigid tapes that will not flop around and slide off the ending of boards. Assessing when you are on your own will be a great deal simpler, and naturally, quality tape measures can last for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Custom Wood Projects

Woodworking is known as the construction or the creation of objects out of wood. It is possible to create a lot of different objects from woodworking and these objects are often as big as gazebos or as small as wooden toys. However big or small your private project maybe you’ll be quite likely to do that goal with woodworking. Additionally, woodworking has many private as well as psychological benefits! In this article, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A lot of individuals who love to use their hands have turned that love into a profession through woodworking. Individuals who build things out of wood are usually known keyword as carpenters. Carpenters can work on a number of woodworking projects and occupation types. For example, a few carpenters possess their carpentry business and these folks have the luxury to place their job hours. This advantage allows carpenters the chance to spend additional time with their families and also have less job strain. Raising children is a very tough task no matter what way you approach the endeavor! For a carpenter who possesses their own business, this job might not be hard since that individual is going to have more time to be a part of his or her child’s life. By playing a larger part in the life span of your child you’ll be having a greater impact on the sort of character that child develops into, which is a massive concern for any loving parent. In addition to these advantages, carpentry may also have health benefits too.

The Benefits of Woodworking Custom Wood Projects

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Keeping your body physically healthy is really important and keyword will help prevent the incidence of various illnesses later on in life. By being physically fit you can decrease chances that you will have a heart attack, have seizures, become a diabetic, and reduce the chances of giving birth to a number of other disorders.

Custom Wood Projects, Do It Yourself Woodworking Saves Cash:

I always feel as that I paid way too far when I visit home improvement shops and purchase patio furniture, and I am certain that I am not the only person who has felt like this! A successful business owner once told me to always raise the sales price of a commodity to double everything you’ve obtained it for. In this manner, you can always decrease the product to 50 percent off and still come out without getting any losses. This seems like it might be the exact same tactic that home improvement shops use in selling their wooden furniture products. Regardless, there is a way which you can get around paying the additional cash and that has to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of detailed woodworking keyword strategies for countless different job types. So, you can really build anything you want or see in any home improvement store. Doing something yourself does take a bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Wood flooring

Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Wood is a common choice as a flooring material and can come in various styles, colors, cuts, and species. Bamboo flooring is often considered a form of wood flooring, although it is made from a grass (bamboo) rather than a timber.[1]

Solid hardwood floors are made of planks milled from a single piece of timber. Solid hardwood floors were originally used for structural purposes, being installed perpendicular to the wooden support beams of a building known as joists or bearers. With the increased use of concrete as a subfloor in some parts of the world, engineered wood flooring has gained some popularity. However, solid wood floors are still common and popular. Solid wood floors have a thicker wear surface and can be sanded and finished more times than an engineered wood floor.[2] It is not uncommon for homes in New England, Eastern Canada, USA, and Europe to have the original solid wood floor still in use today.

Solid wood flooring is milled from a single piece of timber that is kiln or air dried before sawing. Depending on the desired look of the floor, the timber can be cut in three ways: flat-sawn, quarter-sawn, and rift-sawn. The timber is cut to the desired dimensions and either packed unfinished for a site-finished installation or finished at the factory. The moisture content at time of manufacturing is carefully controlled to ensure the product does not warp during transport and storage.

Video: Woodworking Projects