Delta Woodworking | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they’re after because most of the thoughts and projects Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s package quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice within this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who buy it will be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Nonetheless, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear images and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find within. So, it’s definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Delta Woodworking

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and build beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Delta Woodworking.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living space. It will be a topic of conversation whenever you have friends come over to visit. They’ll ask: How did you make it? Where did you get the woodworking plans? How long can it take to finish the job? What type of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Delta Woodworking

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Delta Woodworking.

Begin with an idea in your mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for novices available for purchase from online woodworking merchants. A couple of woodworking plan suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a few. Of course, you can start out with as expansive a woodworking program as you choose. On the other hand, the odds are if you begin using a small woodworking project at first, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Only buy what you want to complete your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not use all that frequently. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t forget the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry area to work and might need a set of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools that beginners will need. You may always increase your toolbox as you gain experience!

Delta Woodworking Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you’re not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Each month the writers in woodworking magazines do a story on the best way best to improve your woodworking craft. When it’s showing you the way to apply an end to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Delta Woodworking

If you are a beginner and very enthusiastic about doing a DIY job for home then, woodworking can be interesting. If you don’t have the right information, education, and ability, you might wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a few essential aspects that you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be very interested in woodworking. Creating something new with your own hands is a special sense. Don’t start a project if you are not interested, as this may land you at a terrible place.

2. Think of the primary reason for making this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and examine the time that you have, before you start with a job.

4. Start jobs which you’re able to complete. If you are in the middle of some work, then it’s better not to begin any project in any way.

Starting Your First Woodworking Shop Delta Woodworking

If you keep those vital points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to start with. As a beginner, always pick a job which has quite a basic build up or a simple structure. A few simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always proceed into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Delta Woodworking

Tools would be the means whereby you can win the struggle of woodworking. A lot of men and women believe power tools are needs. However, for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it might make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Dependent on the sort of project you would like to finish, pricing can be determined. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to buy any more material aside from the wood ply.

Time and Directions

Instructions are among the principal things which every newcomer should follow. Instructions guide is quite simple to understand the procedure, what to do and how to get it done. Time also has a significant role in the construction of woodworking projects. Woodworking projects demand time and so it is necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which can allow you to reach success is proper preparation. With proper planning and a strategy, it’s possible to achieve success quickly. If you understand the purpose of woodworking, the thing you need to build, the resources you need to own and the average time you can give daily; then you’re ready to go.

Conclusion, Delta Woodworking

These strategies and instruction is likely to make the woodworking projects and strategies for novices fast to complete. Always ensure you have all of the vital tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation will help you to make a great woodworking job for your home.

|

The Benefits of Woodworking Delta Woodworking

Folks when trying to find a way to pass time or desire an alternative way to make money they generally turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which project to begin with since you will find projects which can be too tough for a beginner. But don’t worry about that because we will provide you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you have to be aware of whether you’ve got the available tools to work on such a job. Try not to invest a good deal of cash on purchasing equipment when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no gap between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Delta Woodworking

Woodworking in your home will give you time to explore unique projects and find out a lot of things. That is why it’s very important to spend less money when starting out so that you can afford to make mistakes and at any time learning about different projects.
It’s very important that you know more about the different types of wood available for creating jobs. Anticipate carpenters utilize different types of wood quality for decorating bits, learning which kind of wood that they use will help you prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to satisfy your needs.

Delta Woodworking practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts using a variety of tools so that you may find the hang of working with the tools. When starting out you can make a range of mistakes but with time you will find out how to properly use them and create quality projects.

|

The Benefits of Woodworking Delta Woodworking

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a broad variety of simple projects which can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you will do your woodworking, based on the dimensions of your house, you may be able to produce a dedicated space into your woodworking activities. This may be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the home. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without bothering the rest of the household. A good compromise might be the garage of your property.

This might help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Delta Woodworking

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they add more space to work in. Delta Woodworking if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least try to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the start, set up a seat area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf below the seat to house your hand power tools and a pegboard over the bench to hang additional equipment. Install a woodworking vice at one end of the seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Delta Woodworking

The reach of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then buy your quality tools at your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality gently used programs out there which belong to people who embarked on that 1 molding job around the house or received tools as presents which they will never utilize. You can usually buy tools for all these sellers for under half the original cost and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh out the benefits of traveling around town to save a few added bucks on a inexpensive piece of equipment. The extra expense of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand gear yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together in the event that you find them uncomfortable.

The next bit of crucial safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to high sound levels. Select powerful hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite brand name, this may prove to be the most versatile instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be used to construct an whole house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second job. After selecting the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut corners. It is perfect for cutting holes in wood too like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents occur. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Begin with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the beginner woodworker a few years to accumulate a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Get a pair of the longest clamps which you can afford. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the limbs without tedious handle rotation. The timber clamping surfaces on your vice will occasionally require replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the various woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Buy a good quality name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you may not use the tape in these spans, the bigger tape measures offer more rigid tapes which won’t flop around and slide off the end of planks. Measuring when you are on your own will be a lot simpler, and of course, quality tape measures can endure for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I find the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from cheap house brands marketed as carpenter’s glue. The cost of glue through all of your projects is a minor cost consideration. For that reason, it is sensible to go with the very best. I have also found over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Delta Woodworking

The peaceful gratification of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment at the most basic equipment and tools, everyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Delta Machinery

Delta traces its roots to the Delta Specialty Company founded by Herbert Tautz in 1919 in Milwaukee, Wisconsin. Based at first in Tautz' garage, Delta Specialty Company thrived, first making small tools for home shops and later expanding into light industrial machinery. In 1945, Rockwell Manufacturing Company acquired Delta Machinery and renamed it the Delta Power Tool Division of Rockwell Manufacturing Company and continued to manufacture in Milwaukee.[5] In 1966, Rockwell invented the world's first power miter saw. In 1981, Rockwell's power tool group was acquired by Pentair and re-branded Delta Machinery. Pentair's Tools group was acquired by Black & Decker in 2005.[4]

In January, 2011, Taiwan-based Chang Type Industrial Co., Ltd. purchased the Delta brand from Stanley Black & Decker.[2] Chang Type formed a wholly owned subsidiary, Delta Power Equipment Corp. to own the acquired assets including trademarks, designs and industrial tooling.[1] Chang Type is moving Delta's production tooling from a Stanley Black & Decker owned facility in Jackson, Tennessee to a facility in Anderson County, South Carolina.[3] Most recently, Delta has purchased an improved facility in Spartanburg, SC and has moved all operations to this location.

Video: Woodworking Projects