Desk Plans Woodworking | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re following because most of the ideas and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many might still appear unsure if they should be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact many things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People that are just getting started will find the ideas and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to locate any project of their choice in this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large size. Yet, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that can be found throughout the internet. Ted has done his best to direct them in every possible way he can, through simple to comprehend textual directions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it’s definitely worth buying!

The Benefits of Woodworking Desk Plans Woodworking

Woodworking is 1 hobby that could also be a rewarding career if you love to work together with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Desk Plans Woodworking.

It requires time to become skilled in the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you will have the ability to build some really wonderful furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It’ll be a topic of conversation whenever you have friends come over to visit. They will ask: How did you make it? Just how long can it take to complete the project? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your job, a sense of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Desk Plans Woodworking

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Desk Plans Woodworking.

Start with a concept in mind of what you would like to build and then get a really good woodworking project plan that is geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking retailers. A couple of woodworking plan suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a few. Of course, you can start out with as expansive a woodworking program as you choose. However, the odds are if you start out with a small woodworking job initially, you’ll get a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and variety of wood needed, and the required hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you want to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking tools, but it is simple to break the bank buying a lot of tools you might not utilize all that frequently. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood glue! Of course, you will need a dry area to work and may require a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Desk Plans Woodworking Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the authors in woodworking publications do a story on the best way best to increase your woodworking craft. Whether it’s showing you the way you can apply an end to a finished project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Desk Plans Woodworking

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking could be fun. If you don’t have the proper information, education, and skill, you might land up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential factors you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Creating something new with your hands is a special sense. Do not start a project if you are not interested, as this may land you in a bad location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and analyze the time that you have, before you begin with a project.

4. Start jobs which you can complete. If you’re in the midst of a work, then it is better to not begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Desk Plans Woodworking

If you keep these essential points in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you wish to begin with. As a beginner, always select a project which has quite a basic construct up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always move into the next level of woodworking jobs, like cupboards, sheds, and others. Beginning jobs should keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Desk Plans Woodworking

Tools would be the means through which you can win the battle of woodworking. Many men and women believe power tools are needs. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much easy for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws available in the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them can help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but having it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed price on woodworking jobs. Based on the type of project you want to finish, pricing can be set. The simple the job, the less cost it involves. However, at the beginning buying the tools will probably be a little hefty. Because of this, it is better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you don’t have to purchase any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things which every newcomer should follow. Instructions manual is very easy to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also has an important role in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that will help you to achieve success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you understand the purpose of woodworking, the item you need to build, the resources you require in order to own and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Desk Plans Woodworking

All these strategies and instruction will make the woodworking projects and plans for beginners quickly to complete. Always make sure you have all the essential tools, materials, area prepared. Keep the instructions for building a product handy. Appropriate strategy and preparation will allow you to make a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Desk Plans Woodworking

Folks when trying to find a way to pass time or desire an alternate method to make money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be quite careful when choosing which project to start out with because you will find projects which may be too difficult for a beginner. But don’t worry about that since we will give you tips on the right way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you pick your project you have to know if you’ve got the available resources to work on such a job. Try not to invest a good deal of cash on buying equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the artistic hand and the hands.

The Benefits of Woodworking Desk Plans Woodworking

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will give you time to research different projects and find out a lot of things. That’s why it’s important to invest less money when starting out so you can afford to make errors and at any time learning about different jobs.
It’s very important that you know more about the different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning what kind of wood that they use will help you prepare the wood you’ll need for specific jobs you might want to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to fulfill your needs.

Desk Plans Woodworking practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts using various tools so you can find the hang of using the tools. When starting out you may earn a number of errors but with time you will find out how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Desk Plans Woodworking

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a wide variety of simple projects which can help you develop your creative and building skills while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you will perform your woodworking, Depending on the dimensions of your house, you might have the ability to produce a dedicated space to your woodworking activities. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your very first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the family. A fantastic compromise might be the garage of your property.

This might help minimize the problems of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Desk Plans Woodworking

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Desk Plans Woodworking if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can stay in place from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, establish a bench area where you can store and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hands power tools along with a pegboard over the seat to hang other equipment. Put in a woodworking vice at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Desk Plans Woodworking

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. You will find an abundance of quality lightly used tools out there which belong to people who stumbled on that 1 molding project around the home or received tools as presents that they will never utilize. You can usually purchase tools for all these sellers for less than half of the original cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and possibly travel expenses. Weigh out the advantages of traveling around town to save a few extra bucks on a cheap piece of gear. The extra cost of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet produced sophisticated and complex pieces. Focus on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to high sound levels. These can contain earplugs or complete ear keyword muff protectors. I find that a excellent set of ear muff guards is perfect for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this may end up being the most flexible instrument in a startup workshop. In reality, in the hands of an expert, a power hand saw can be employed to construct an entire house. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next job. After selecting the proper saw install an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot just cut corners. It’s perfect for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are much more versatile but a excellent floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries occur. Although the most ordinary, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover that your palm sander with a little bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in concept, these tools enable you to taper borders, sew high stains and correct any imperfections in timber bits. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the longest clamps which you could spend. You may get in touch with them for smaller adhesive jobs and expand them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you quick release mechanisms that enable the consumer to rapidly open and close the limbs with no dull handle turning. The wood clamping surfaces on your vice will occasionally require replacement. I would rather use soft walnut in my vices that will not crush or damage lots of the different woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your store you might not use the tape at these lengths, the bigger tape steps provide more rigid tapes that won’t flop around and slide off the end of planks. Assessing when you’re by yourself will be a great deal simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The expense of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to go with the very best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Desk Plans Woodworking

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of rushed lives, smartphones, and time-starved careers. With a minimal investment in the most basic tools and equipment, everyone can learn the rewarding skills of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Desk

A desk or bureau is a piece of furniture with a flat table-style work surface used in a school, office, home or the like for academic, professional or domestic activities such as reading, writing, or using equipment such as a computer.[1][2] Desks often have one or more drawers, compartments, or pigeonholes to store items such as office supplies and papers.[2] Desks are usually made of wood or metal, although materials such as glass are sometimes seen.

Some desks have the form of a table, although usually only one side of a desk is suitable to sit at (there are some exceptions, such as a partners desk),[3] unlike most usual tables. Some desks do not have the form of a table, for instance, an armoire desk[4] is a desk built within a large wardrobe-like cabinet, and a portable desk[5] is light enough to be placed on a person's lap. Since many people lean on a desk while using it, a desk must be sturdy. In most cases, people sit at a desk, either on a separate chair or a built-in chair (e.g., in some school desks). Some people use standing desks to be able to stand while using them.

The word "desk" originated from the Modern Latin word desca "table to write on", from the mid 14th century.[6] It is a modification of the Old Italian desco "table", from Latin discus "dish" or "disc".[2] The word desk has been used figuratively since 1797.[6] A desk may also be known as a bureau, counter, davenport, escritoire, lectern, reading stand, rolltop desk, school desk, workspace, or writing desk.[7]

Video: Woodworking Tools