Discount Woodworking Power Tools | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are following because most of the thoughts and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the right option. There are actually many things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those that are just getting started will find the ideas and jobs in Ted’s package quite simple. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice within this package quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it will be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that can be found across the internet. Ted has done his very best to direct them in every conceivable way he can, through simple to understand textual instructions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find inside. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools which beginners will need. You can always increase your toolbox as you get experience!

Discount Woodworking Power Tools Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Every month the writers in woodworking publications do a story about how to increase your woodworking craft. When it’s showing you the way you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

The Benefits of Woodworking Discount Woodworking Power Tools

If you’re a beginner and very enthusiastic about doing a DIY job for home afterward, woodworking could be fun. If you don’t have the right information, education, and ability, you might land up spending more time and money than you initially meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a job if you’re not interested, as this may land you at a bad place.

2. Consider the primary reason for making this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and examine the time you have, before you start with a project.

4. Start projects which you can finish. If you’re in the middle of some work, then it is wise not to start any project in any way.

The Benefits of Woodworking Discount Woodworking Power Tools

If you maintain these vital points in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you wish to start with. As a beginner, always select a project which has quite a basic build up or a simple structure. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you can always move into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Discount Woodworking Power Tools

Tools would be the ways through which you will win the battle of woodworking. Many people believe power tools are requires. But for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much simple for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available in the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you ahead of time woodworking. You can also buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for novices, but having it might make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking projects. Dependent on the type of project you want to finish, pricing can be determined. The easy the project, the less cost it involves. But at the beginning buying the tools will probably be a little hefty. Therefore, it is better to fix a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you don’t need to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the primary things which each and every beginner should follow. Instructions guide is very simple to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also has an important part in the construction of woodworking jobs. Woodworking projects demand time and so it’s crucial for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most indispensable thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, the item that you need to build, the tools you need to own and the typical time it’s possible to devote every day; then you are ready to go.

Conclusion, Discount Woodworking Power Tools

All these strategies and instruction will create the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all of the vital tools, materials, area ready. Keep the instructions for building a product handy. Proper strategy and planning can help you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Discount Woodworking Power Tools

Folks if you’re trying to find a way to pass time or desire an alternate way to make money they generally turn to a hobby that they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be quite cautious when choosing which job to begin with since you will find jobs which may be too difficult for a beginner. But do not be concerned about that because we are going to give you guidelines on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you need to be aware of if you have the available resources to work on that job. Try not to spend a good deal of money on buying gear when starting out, buy more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Discount Woodworking Power Tools

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will give you time to research different projects and find out so many things. That’s why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about different projects.
It is extremely important you know about different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning what type of wood they use can allow you to prepare the wood you’ll need for certain jobs you might choose to pursue.
Once you understand the basics of wood choice and the usage of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to fulfill your wants.

Discount Woodworking Power Tools practice makes perfect so make sure you practice your work every day if at all possible. Try out a lot of layouts utilizing various tools so you may get the hang of using the tools. When starting out you can earn a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Discount Woodworking Power Tools

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal amount of gear and equipment. A little home workshop may produce a broad variety of simple projects which can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us talk about where you will do your woodworking, based on the size of your home, you may be able to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your very first store. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the upper levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without disturbing the remainder of the family. A good compromise might be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Discount Woodworking Power Tools

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Discount Woodworking Power Tools if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in place from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and gear. At the beginning, set up a seat area where you can shop and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to house your hands power tools and a pegboard over the seat to hang additional gear. Put in a woodworking vice at one end of the seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Discount Woodworking Power Tools

The reach of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools in the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. There are plenty of quality lightly used tools out there which belong to people who embarked on that 1 molding job around the house or received tools as gifts which they won’t ever use. You can usually buy tools for these sellers for less than half of the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and perhaps travel expenditures. Weigh the benefits of traveling around town to save a few added bucks on a cheap piece of gear. The extra expense of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the popular name, this may end up being the most flexible instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be employed to construct an whole property. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After selecting the proper saw install an excellent blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid . These have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut corners. It’s ideal for cutting holes in timber also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the standard 3/8 inch version. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t want in your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries occur. Even though the most ordinary, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll find your palm sander using a little bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a set of the maximum clamps that you can spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the consumer to rapidly open and close the limbs without tedious handle turning. The wood beamed surfaces on your vice will occasionally need replacement. I would rather utilize soft pine in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually from the 25-foot selection. Although in your store you might not be using the tape in these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slip off the ending of planks. Assessing when you are on your own will be a lot simpler, and of course, quality tape steps can endure for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The cost of adhesive through all your projects is a little cost consideration. Therefore, it makes sense to go with the best. I have also found over time that I get the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Discount Woodworking Power Tools

The peaceful satisfaction of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most basic tools and equipment, anyone can learn the profitable skills of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of words having different meanings in American and British English (A–L)

Note: the below are general references on this topic. Individual entries have not yet been audited against the references below and readers looking for verifiable information should consult the works below unless individual entries in the article's table are properly sourced.

Video: Woodworking Tools