Diy Carpentry Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they’re following because most of the ideas and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any job of their choice within this package quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large dimensions. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available across the net. Ted has done his very best to guide them in every possible way he could, through simple to understand textual instructions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Diy Carpentry Projects

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will be able to construct all types of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking projects and make a handsome profit. Diy Carpentry Projects.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation when you have friends come over to see. They will ask: How did you create it? Where did you get the woodworking programs? Just how long did it take to complete the project? What type of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a feeling of pride will come over you and don’t be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Diy Carpentry Projects

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Diy Carpentry Projects.

Start with an idea in your mind of what you would like to build and then get a really good woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for sale from online woodworking merchants. A couple of woodworking program suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a couple. Of course, you can begin with as expansive a woodworking plan as you pick. On the other hand, the chances are if you begin with a little woodworking project at first, you will get a better prospect of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the quantity and type of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to complete your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not utilize all that frequently. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood glue! Of course, you will need a dry area to work and may require a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Diy Carpentry Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking publications do a story about how best to improve your woodworking craft. When it is showing you how you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Diy Carpentry Projects

If you are just beginning and very interested in doing a DIY job for house then, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you might land up spending more time and money than you initially meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having said, there are a few essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a particular sense. Do not start a project if you are not interested, because this might land you in a bad location.

2. Consider the primary reason for making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and analyze the time you have, until you begin with a project.

4. Start jobs that you can finish. If you are in the middle of a work, then it is wise not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Diy Carpentry Projects

If you keep those vital points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking projects you wish to begin with. As a newcomer, always select a project which has quite a basic build up or a simple structure. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Diy Carpentry Projects

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women believe power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there in the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this is not a tool for beginners, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking projects. Dependent on the sort of project that you want to complete, pricing can be set. The simple the project, the less price it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s much better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will make certain you don’t need to purchase any more material other than the timber ply.

Time and Instructions

Directions are one of the principal things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the procedure, what to do and the way to do it. Time also plays an important part in the building of woodworking projects. Woodworking projects require time and so it is necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which will help you to reach success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you know the objective of woodworking, then the thing you need to build, the tools you require in order to own and the typical time it’s possible to devote every day; then you are all set to go.

Conclusion, Diy Carpentry Projects

These tips and instruction will make the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all of the essential tools, materials, space ready. Read the instructions for building a product handy. Proper strategy and preparation can help you to earn a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Diy Carpentry Projects

People when trying to find a way to pass time or want an alternate way to make money they usually turn into a hobby that they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be very careful when choosing which job to start out with since there are jobs which can be too tough for a newbie. But do not be concerned about that because we will give you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you need to be aware of whether you have the available resources to work on such a project. Try not to invest a lot of cash on buying equipment when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will be no difference between the hand and the normal hands.

The Benefits of Woodworking Diy Carpentry Projects

Woodworking at home will provide you time to explore different projects and learn a lot of things. That is why it’s very important to invest less money when starting out so you can manage to make mistakes and at some time learning about different projects.
It’s very important you know about different types of wood available for creating projects. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning what type of wood that they use can help you prepare the wood you’ll need for specific jobs you may want to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Diy Carpentry Projects practice makes perfect so be sure that you practice your work daily if possible. Try out lots of layouts using various tools so you can find the hang of working with the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Diy Carpentry Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum number of gear and equipment. A small home workshop can generate a broad variety of simple projects that will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you will do your woodworking, Depending on the dimensions of your house, you may be able to create a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your very first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the home. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the remainder of the family. A good compromise might be the garage of your property.

This can help decrease the problems of dust and noise, however based on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Diy Carpentry Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. Diy Carpentry Projects if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can stay in place from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and gear. At the start, establish a bench area where you can shop and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hand power tools and a pegboard above the seat to hang additional equipment. Install a woodworking vice at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Diy Carpentry Projects

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools in your regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. There are an abundance of quality gently used programs out there which belong to individuals who embarked on that 1 molding project around the house or received tools as gifts that they won’t ever utilize. You can usually purchase tools for these sellers for less than half the original price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private people will require additional time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The extra expense of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand gear yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uneasy.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can end up being the most flexible tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be used to build an entire property. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After choosing the proper saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut corners. It is ideal for cutting holes in wood also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might find your palm sander with a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your seat is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the user to quickly open and close the jaws with no tedious handle rotation. The timber beamed surfaces in your vice will occasionally require replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the different forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually in the 25-foot selection. Although in your store you might not be using the tape at these lengths, the bigger tape measures provide more rigid tapes that will not flop around and slip off the ending of planks. Assessing when you are on your own will be a lot easier, and of course, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber.

What is Woodworking? Starting Your First Woodworking Shop Diy Carpentry Projects

Woodworking is referred to as the building or the production of items from wood. You can produce a great deal of unique items from woodworking and these objects are often as large as gazebos or as little as wooden toys. No matter how big or small your personal project maybe you’ll be very likely to do that aim with woodworking. In addition, woodworking has lots of personal as well as psychological benefits! In the following guide, I am going to briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

People who build things out of wood are generally known keyword because carpenters. Carpenters can operate on a number of woodworking projects and job types. For instance, a few carpenters own their carpentry business and these individuals have the luxury to place their work hours. This benefit enables carpenters the opportunity to spend additional time with their families and have less job strain. Raising children is a really tough task no matter what way you approach the endeavor! To get a carpenter who possesses his or her own company, this task might not be as hard since that person will have more time to be a part of his or her child’s lifetime. By playing a bigger part in the life span of your child you will be having a larger impact on the sort of personality that kid develops into, which is a massive concern for any loving parent. In addition to these advantages, carpentry can also have health benefits as well.

The Benefits of Woodworking Diy Carpentry Projects

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword can assist in preventing the incidence of various ailments later on in life. By being physically fit you can decrease chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the chances of having a range of different disorders.

Diy Carpentry Projects, Do It Yourself Woodworking Saves Money:

I feel as I paid way too far when I go to home improvement shops and purchase patio furniture, and I am sure that I am not the only person that has felt like this! A successful small business owner once told me to constantly raise the sales price of a commodity to double everything you’ve obtained it for. This way, you always have the option to decrease the merchandise to 50 percent off and come out without getting any losses. This sounds like it may be the exact same strategy that home improvement shops use in selling their wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the additional money and that’s to do with building it yourself. Luckily, there are several really good woodworking products that offer thousands of comprehensive woodworking keyword plans for countless different project types. So, you really can build whatever you want or see in almost any home improvement store. Doing something does take a little bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Jason Cameron

Jason Cameron (born April 19, 1969) is an American television presenter and actor most notable for his role on the TLC reality show, While You Were Out and is currently hosting Man Caves and Desperate Landscapes for the DIY Network.

In 1999, Cameron moved to New York City to pursue an acting career. He landed a few minor roles to date including on Sex and the City, The Guiding Light and All My Children. At the same time, he became a print model appearing in Men’s Health, Men’s Fitness, Maxim and GQ.[2]

Cameron has developed a passion for carpentry and construction at a young age, and worked as a construction worker after college to make ends meet. In 2003, he auditioned as an on-screen carpenter for the TLC renovation program, While You Were Out. He got the job and joined the cast in season two, staying on until the end of the show's run in 2006.

Video: Woodworking Tools