Diy Outdoor Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re after because all the thoughts and projects Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s package quite easy. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any project of their choice in this package quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who buy it’ll be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large dimensions. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always add to your toolbox as you get experience!

Diy Outdoor Furniture Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the authors in woodworking publications do a story about how to increase your woodworking craft. When it’s showing you the way you can apply an end to a finished project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Diy Outdoor Furniture Plans

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking could be interesting. If you do not have the right information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a few essential factors you need to remember, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Do not start a project if you’re not interested, because this might land you in a bad location.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, until you begin with a project.

4. Start jobs that you’re able to complete. If you are in the midst of a work, then it is better to not start any project in any way.

Starting Your First Woodworking Shop Diy Outdoor Furniture Plans

If you maintain those essential points in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects you want to begin with. As a newcomer, always pick a project that has a very basic build up or a very simple construction. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less frustrating so that you have a better knowledge of working with forests and their resources. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Diy Outdoor Furniture Plans

Tools are the ways through which you will win the battle of woodworking. Many people believe power tools are needs. But for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, constantly check the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You can also buy keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for novices, but having it might make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking projects. Dependent on the type of project that you would like to complete, pricing can be set. The simple the job, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s much better to resolve a budget on the resources, then keyword on the project. Buying the fundamental tools will ensure that you do not have to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are among the principal things that each and every newcomer should follow. Instructions manual is very easy to understand the procedure, what to do and how to do it. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and therefore it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword that can allow you to reach success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the item you need to construct, the tools you need to possess and the typical time it’s possible to give every day; then you’re ready to go.

Conclusion, Diy Outdoor Furniture Plans

All these strategies and instruction will make the woodworking projects and strategies for novices quickly to complete. Always ensure that you have all the vital tools, materials, space prepared. Keep the instructions for constructing a product handy. Proper strategy and preparation can allow you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Diy Outdoor Furniture Plans

People when trying to find a way to pass time or desire an alternative method to make money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are lots of projects one can consider. When starting out you have to be very cautious when choosing which job to begin with because there are projects which may be too tough for a newbie. But do not worry about that because we will give you guidelines on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you choose your job you have to know if you’ve got the available resources to work on such a job. Try not to spend a lot of cash on buying gear when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Diy Outdoor Furniture Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to research unique projects and find out so many things. That’s why it’s important to spend less money when starting out so you can afford to make errors and at some time learning about various jobs.
It’s very important that you know more about the different kinds of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you’ll need for specific projects you may choose to pursue.
As soon as you understand the basics of wood selection and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to satisfy your wants.

Diy Outdoor Furniture Plans practice makes perfect so be sure you practice your work daily if possible. Try out lots of designs using various tools so you can get the hang of using the tools. When starting out you can make a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Diy Outdoor Furniture Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A small home workshop can generate a broad array of simple projects that can help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you’ll perform your woodworking, Depending on the dimensions of your house, you may be able to create a dedicated space into your woodworking activities. This might be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to prepare your first store. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your property.

This might help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Diy Outdoor Furniture Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Diy Outdoor Furniture Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you get more tools and gear. In the beginning, establish a seat area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Insert a sturdy shelf below the seat to house your hand power tools along with a pegboard over the seat to hang other equipment. Put in a woodworking at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Diy Outdoor Furniture Plans

The scope of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools at the regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. There are plenty of quality gently used programs out there which belong to people who stumbled on that 1 molding project around the home or obtained tools as gifts that they won’t ever utilize. You can usually purchase tools for these sellers for less than half the original price and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenditures. Weigh the benefits of traveling around town to save a couple added dollars on a inexpensive piece of equipment. The excess cost of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal quantity of hand gear yet produced sophisticated and intricate pieces. Focus on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this can prove to be the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be used to build an entire property. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next project. After choosing the proper saw install a quality blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid . All these possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut curves. It’s perfect for cutting holes in wood too like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch model. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t want on your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll discover that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this grade of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a set of the longest clamps which you could spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the jaws without tedious handle turning. The wood beamed surfaces on your vice will occasionally need replacement. I prefer to use soft walnut in my vices that will not crush or damage lots of the various forests that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Buy a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your store you may not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which will not flop around and slide off the end of boards. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive home brands sold as carpenter’s glue. The cost of adhesive through all your projects is a little cost consideration. Therefore, it is sensible to decide on the best. I also have discovered over time that I get the best results with both indoor and outdoor jobs when I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Diy Outdoor Furniture Plans

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools