Diy Timber Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they are after because all the thoughts and jobs Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those that are only getting started will discover the thoughts and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any job of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available throughout the internet. Ted has done his very best to guide them in every possible way he can, through simple to comprehend textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Diy Timber Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the authors in woodworking magazines do a story about the best way best to improve your woodworking craft. When it is showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is purchasing educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Diy Timber Projects

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you do not have the right information, education, and skill, you might wind up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Do not begin a job if you are not interested, because this might land you in a bad place.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start jobs that you’re able to complete. If you’re in the middle of some work, then it’s wise to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Diy Timber Projects

If you maintain these essential things in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you wish to start with. As a beginner, always select a job which has quite a basic construct up or a very simple structure. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so you have a better comprehension of working with forests and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Diy Timber Projects

Tools are the ways through which you will win the struggle of woodworking. Many people think that power tools are requires. But for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available on the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You can even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed cost on woodworking projects. Based on the sort of project that you want to finish, pricing can be determined. The easy the project, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will make certain you don’t have to purchase any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things that each and every beginner should follow. Instructions manual is quite easy to comprehend the process, what to do and the way to do it. Time also has an important part in the construction of woodworking jobs. Woodworking projects demand time and therefore it’s necessary for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that can help you to achieve success is proper planning. With proper planning and a plan, it is possible to achieve success quickly. If you understand the objective of woodworking, then the thing that you want to construct, the resources you need in order to own and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Diy Timber Projects

All these strategies and education will make the woodworking projects and plans for novices quickly to finish. Always make sure that you have all of the essential tools, materials, space ready. Read the instructions for constructing an item handy. Appropriate strategy and preparation can help you to make a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Diy Timber Projects

Folks if you’re trying to find a way to pass time or want an alternate way to generate money they usually turn into a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be quite careful when choosing which job to begin with since there are jobs which may be too difficult for a newbie. But don’t be concerned about that because we will provide you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, so before you pick your job you need to be aware of whether you have the available resources to work on that project. Try not to spend a lot of cash on buying equipment when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Diy Timber Projects

Woodworking in your home will give you time to research different projects and find out a lot of things. That is why it’s important to spend less money when starting out so you can manage to make errors and at some time learning about various jobs.
It is very important that you know about the different types of wood available for making projects. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning which type of wood they use can help you prepare the wood you will need for specific jobs you might want to pursue.
Once you understand the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to satisfy your needs.

Diy Timber Projects practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of designs using various tools so you may find the hang of using the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly use them and create quality projects.

|

Starting Your First Woodworking Shop Diy Timber Projects

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum amount of tools and equipment. A little home workshop may produce a broad variety of simple projects which can help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you will perform your woodworking, Depending on the size of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to set up your first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the top levels of the home. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the remainder of the household. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Diy Timber Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Diy Timber Projects if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can remain in place from project to project. If this installation isn’t impossible, at least try to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and gear. At the beginning, establish a seat area where you can store and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to house your hand power tools along with a pegboard above the bench to hang additional gear. Put in a woodworking vice at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Diy Timber Projects

The scope of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools in the regional building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional advertisements. There are plenty of quality gently used programs out there that belong to individuals who stumbled on that one molding project around the home or obtained tools as presents which they won’t ever use. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and perhaps travel expenses. Weigh the advantages of traveling across town to save a couple extra dollars on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to elevated noise levels. Last, put on a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw following the popular name, this may end up being the most flexible tool in a start-up workshop. In fact, in the hands of an expert, a power hand saw can be employed to build an whole house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your next project. After selecting the proper saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It’s perfect for cutting holes in timber too like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the standard 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll discover your palm sander using a bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber bits. {Start with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you could afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to rapidly open and close the jaws without dull handle turning. The wood beamed surfaces on your vice will periodically need replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage lots of the various woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually in the 25-foot range. Even though in your shop you may not use the tape at these lengths, the larger tape measures provide more rigid tapes that won’t flop around and slip off the ending of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape steps can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Diy Timber Projects

Woodworking is referred to as the construction or the creation of objects out of wood. It is possible to create a great deal of different items from woodworking and these items can be as large as gazebos or as little as wooden toys. However large or small your personal project maybe you will be very likely to do that aim with woodworking. In addition, woodworking has lots of personal as well as emotional benefits! In the following guide, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

People who build things from wood are generally known keyword because carpenters. Carpenters can operate on a variety of woodworking projects and occupation types. For instance, some carpenters own their carpentry business and these folks have the luxury to set their job hours. This benefit allows carpenters the chance to spend additional time with their own families and have less job stress. Raising children is a very difficult task regardless of what way you approach the task! To get a carpenter who owns his or her own company, this job may not be as hard since that individual is going to have more time to be a part of her or his child’s life. By playing a larger part in the life of your child you’ll be having a greater influence on the sort of personality that child develops into, which is a huge concern for any loving parent. In addition to these benefits, carpentry may also have health benefits as well.

How to Become a Master Woodworker From Your Own Home Diy Timber Projects

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This causes more physical activity, which results in better physical health. Maintaining your body physically healthy is really important and keyword can assist in preventing the incidence of various ailments later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and reduce the odds of giving birth to a number of other illnesses.

Diy Timber Projects, Do It Yourself Woodworking Saves Money:

I feel as I paid way too much when I go to home improvement shops and buy patio furniture, and I am certain that I’m not the only person that has felt this way! A successful small business owner once advised me to constantly increase the sales price of a commodity to double what you’ve got it for. This way, you can always decrease the merchandise to 50 percent away and come out without acquiring any losses. This seems like it may be exactly the same tactic that home improvement shops use in selling their wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the additional cash and that’s to do with building it yourself. Fortunately, there are some really excellent woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different job types. So, you can really build anything you want or see in almost any home improvement store. Doing something yourself does require a bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Barnwood Builders

Barnwood Builders is an American documentary television series following a team of builders that convert historic barns and log cabins into modern houses.[1][dead link][2][3][4] It is broadcast on the DIY Network,[5] Discovery Channel and Great American Country[6] in the United States.

Barnwood Builders follows Mark Bowe, whose West Virginia company[9] purchases old barns and log cabins in order to reuse the hand-hewn logs in modern housebuilding.[10] His team specializes in the reclamation and restoration of pioneer era structures in the eastern United States.[11][12][13][14]

Video: Woodworking Projects