Diy Wood Table Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re after because all the ideas and projects Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those that are only getting started will discover the thoughts and jobs in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step-by-step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to locate any project of their choice in this package quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be endorsed by a 60-day warranty, so if this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found throughout the internet. Ted has done his very best to guide them in every conceivable way he could, through simple to understand textual directions, clear images and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools , but the concept is to purchase the crucial hand and power tools that beginners will need. You can always increase your arsenal as you gain experience!

Diy Wood Table Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the authors in woodworking publications do a story about how to increase your woodworking craft. When it’s showing you how to apply an end to a finished job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Diy Wood Table Plans

If you’re just beginning and very enthusiastic about doing a DIY project for home then, woodworking can be fun. If you don’t have the proper information, education, and ability, you may wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not start a job if you’re not interested, because this might land you in a bad place.

2. Consider the primary reason for making this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and examine the time you have, until you start with a project.

4. Start jobs which you can complete. If you are in the midst of some work, then it’s wise not to begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Diy Wood Table Plans

If you maintain these vital points in your mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a newcomer, always select a project which has a very basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you could always move into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Diy Wood Table Plans

Tools would be the ways through which you will win the battle of woodworking. A lot of men and women think that power tools are needs. But for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, always assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws out there in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you in advance woodworking. You might also purchase keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed price on woodworking jobs. Based on the type of project that you would like to finish, pricing could be set. The easy the project, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is much better to fix a budget on the tools, then keyword on the project. Buying the basic tools will ensure that you do not need to buy any more material aside from the timber ply.

Time and Instructions

Directions are one of the primary things which every newcomer should follow. It is like the woodworking Bible. Instructions manual is very simple to understand the procedure, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also has an important part in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most indispensable thing keyword which will help you to reach success is proper planning. With proper planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, then the thing that you need to build, the resources you require in order to own and the average time you can give daily; then you are all set to go.

Conclusion, Diy Wood Table Plans

All these strategies and instruction is likely to make the woodworking projects and strategies for beginners quickly to complete. Always make sure you have all of the vital tools, materials, space prepared. Keep the instructions for building a product handy. Appropriate strategy and planning will help you to make a great woodworking project for your property.

|

The Benefits of Woodworking Diy Wood Table Plans

People when looking for a way to pass time or want an alternate way to generate money they generally turn to a hobby that they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which project to start out with because there are projects that may be too difficult for a newbie. But do not be concerned about that because we are going to provide you tips on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your project you have to be aware of whether you’ve got the available resources to work on that job. Try not to spend a good deal of money on purchasing gear when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the artistic hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Diy Wood Table Plans

Woodworking in your home will provide you time to explore unique projects and find out so many things. That is why it’s very important to spend less money when starting out so that you can afford to make mistakes and at any time learning about various projects.
It’s very important you know about the different kinds of wood available for creating projects. Anticipate carpenters use different types of wood quality for decorating bits, learning what type of wood they use can help you prepare the wood you’ll need for specific projects you may choose to pursue.
Once you know the fundamentals of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to satisfy your wants.

Diy Wood Table Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs utilizing a variety of tools so that you can find the hang of working with the tools. When starting out you may make a range of errors but with time you will learn how to correctly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Diy Wood Table Plans

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A little home workshop can produce a wide array of simple projects that will help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will perform your woodworking, based on the size of your home, you might be able to create a dedicated space into your woodworking activities. This might be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to set up your first shop. A heated shop detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the remainder of the household. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Diy Wood Table Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Diy Wood Table Plans if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top gear can stay in position from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment can be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. In the start, establish a bench area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf beneath the bench to house your hand power tools along with a pegboard over the bench to hang additional equipment. Put in a woodworking at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Diy Wood Table Plans

The reach of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools in your local construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. There are plenty of quality lightly used tools out there which belong to individuals who embarked on that one molding project around the house or received tools as gifts which they won’t ever use. You can usually purchase tools for these sellers for under half of the initial price and save even more money should you make a package deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a few added bucks on a cheap piece of equipment. The extra cost of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this may end up being the most versatile tool in a startup workshop. In fact, at the hands of an expert, a power hand saw can be employed to construct an whole house. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next job. After choosing the proper saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and install a quality blade with carbide teeth. Start with a hybrid . These have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut corners. It’s perfect for cutting holes in timber too like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you don’t want in your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll find your palm sander with just a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in timber pieces. {Begin with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you could spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the user to quickly open and close the jaws without tedious handle turning. The timber clamping surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices that will not crush or damage lots of the various forests that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually in the 25-foot range. Even though in your store you may not use the tape in these spans, the larger tape measures provide more rigid tapes which will not flop around and slip off the ending of planks. Measuring when you are by yourself will be a lot simpler, and naturally, quality tape measures can endure for many years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works best for many woodworking projects and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing small mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from cheap house brands sold as carpenter’s glue. The cost of glue through all of your projects is a minor cost consideration. For that reason, it makes sense to go with the very best. I also have discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Diy Wood Table Plans

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment at the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

B&Q

B&Q plc is a British multinational DIY and home improvement retailing company, headquartered in Eastleigh, England, United Kingdom and is a wholly owned subsidiary of Kingfisher plc. Founded by Richard Block and David Quayle in 1969 originally as Block & Quayle, the retail chain offers over 40,000 products across three hundred physical shops and online shops.

Since 2015, B&Q has been closing a number of shops, in favour of converting some to outlets of Screwfix. The company also has some outlets in Ireland. Shops in Taiwan and China were unsuccessful, and closed down in 2007 and 2015 respectively.

B&Q was founded in March 1969 in Southampton, England, by Richard Block and David Quayle, following the purchase and fitting out of a former furniture warehouse in the Southampton suburb of Portswood.[3] Originally called Block & Quayle, the duo soon shortened the brand to B&Q as stock delivery notes and invoices were already unofficially abbreviating the name.

Video: Woodworking Tools