Diy Woodworking Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking when they are after because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still appear unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those who are just getting started will find the thoughts and jobs in Ted’s package quite easy. No doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to find any job of their choice in this package quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it will be backed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to guide them in every possible way he could, through easy to understand textual directions, clear images and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it is certainly worth buying!

The Benefits of Woodworking Diy Woodworking Ideas

Woodworking is one hobby that could also be a rewarding profession if you love to work together with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Diy Woodworking Ideas.

It requires time to become skilled at the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll be able to create some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation whenever you have friends come over to visit. They will ask: How can you make it? Where did you get the woodworking plans? How long did it take to finish the job? What kind of tools did you use? How on earth did you make such a beautiful piece of furniture? As you discuss your work, a sense of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Diy Woodworking Ideas

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Diy Woodworking Ideas.

Begin with a concept in your mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward beginners. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. Obviously, you can begin with as expansive a woodworking program as you choose. However, the odds are if you start out using a little woodworking project initially, you will have a better chance of keyword completing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking gear, but it is simple to break the bank buying a great deal of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry area to work and might require a pair of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that novices will need. You can always increase your arsenal as you get experience!

Diy Woodworking Ideas Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the authors in woodworking publications do a story on how best to improve your woodworking craft. When it is showing you how you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Diy Woodworking Ideas

If you’re a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking can be fun. If you don’t have the right information, education, and ability, you might land up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first need to be very interested in woodworking. Making something new with your hands is a special sense. Do not begin a project if you are not interested, because this might land you in a bad location.

2. Think of the main reason behind making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your skills and analyze the time that you have, before you begin with a job.

4. Start projects that you’re able to complete. If you are in the middle of some work, then it is better to not begin any project in any way.

Starting Your First Woodworking Shop Diy Woodworking Ideas

If you maintain these vital things in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking projects you want to begin with. As a newcomer, always select a job that has a very basic build up or a simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so you have a better knowledge of working with forests and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Diy Woodworking Ideas

Tools would be the means through which you can win the struggle of woodworking. A lot of men and women think that power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available in the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed cost on woodworking projects. Based on the sort of job that you would like to complete, pricing could be determined. The simple the project, the less cost it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it is better to resolve a budget on the resources, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t have to buy any more material aside from the timber ply.

Time and Directions

Directions are among the primary things which every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite simple to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic guide for completing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper preparation. With proper planning and a plan, it is likely to achieve success quickly. If you understand the purpose of woodworking, the item that you want to build, the resources you need in order to possess and the typical time it’s possible to devote every day; then you are ready to go.

Conclusion, Diy Woodworking Ideas

All these tips and instruction will make the woodworking projects and strategies for beginners quickly to complete. Always make sure you have all of the essential tools, materials, area prepared. Keep the instructions for building a product handy. Proper strategy and planning will help you to earn a great woodworking job for your property.

|

Starting Your First Woodworking Shop Diy Woodworking Ideas

People when looking for a way to pass time or desire an alternate method to make money they usually turn to a hobby that they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which project to begin with because there are projects that can be too tough for a beginner. But don’t be concerned about that because we will provide you tips on the ideal way to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you pick your project you need to be aware of whether you have the available tools to work on such a project. Try not to invest a lot of cash on buying gear when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the normal hands.

Starting Your First Woodworking Shop Diy Woodworking Ideas

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to research different jobs and find out so many things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different projects.
It is extremely important that you know about different types of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating pieces, learning what kind of wood they use can help you prepare the wood you’ll need for specific jobs you may choose to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good projects to satisfy your needs.

Diy Woodworking Ideas practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of designs utilizing various tools so you may find the hang of using the tools. When starting out you can earn a range of errors but with time you will learn how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Diy Woodworking Ideas

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimal amount of gear and equipment. A small home workshop can generate a broad array of simple projects that will help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you’ll do your woodworking, Depending on the size of your house, you might have the ability to create a dedicated space into your woodworking activities. This might be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to set up your first store. A heated store detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the top levels of the home. Another benefit of detached workshops is, clearly, the noise level. You can work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This might help decrease the problems of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Diy Woodworking Ideas

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they add more space to work in. Diy Woodworking Ideas if you can have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can remain in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and equipment. At the beginning, set up a seat area where you are able to shop and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hand power tools and a pegboard above the bench to hang other gear. Put in a woodworking at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Diy Woodworking Ideas

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools at the local building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. There are an abundance of quality gently used tools out there that belong to individuals who embarked on that one molding project around the house or obtained tools as gifts which they won’t ever use. You can usually purchase tools for these sellers for under half of the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will take extra time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple added dollars on a cheap piece of gear. The excess cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand equipment yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to high sound levels. These may include earplugs or full ear keyword muff protectors. I find a excellent pair of ear muff protectors is perfect for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the popular brand name, this may prove to be the most flexible tool in a start-up workshop. In fact, in the hands of an expert, a power hand saw can be used to build an entire property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you start your second project. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut corners. It is perfect for cutting holes in timber too like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not need in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander with a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Start with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a few years to collect a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the maximum clamps which you can spend. You may contact them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws without dull handle rotation. The timber clamping surfaces in your vice will periodically require replacement. I prefer to utilize soft pine in my vices that won’t crush or damage lots of the different woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your store you may not use the tape in these spans, the larger tape steps provide more rigid tapes which won’t flop around and slip off the end of planks. Measuring when you are on your own will be a lot easier, and of course, quality tape measures can last for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of adhesive through all of your jobs is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have discovered over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Diy Woodworking Ideas

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimal investment at the most basic equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

DIY ethic

DIY ethic is the ethic of self-sufficiency through completing tasks without the aid of a paid expert. The "do it yourself" (DIY) ethic promotes the idea that anyone is capable of performing a variety of tasks rather than relying on paid specialists.

The DIY ethic requires that the adherent seeks out the knowledge required to complete a given task. This ethic emerges in correspondence to the punk subculture, the DIY ethic is tied to punk ideology and anticonsumerism. Central to the ethic is the empowerment of individuals and communities, encouraging the employment of alternative approaches when faced with bureaucratic or societal obstacles to achieving their objectives.

According to the punk aesthetic, one can express oneself and produce moving and serious works with limited means.[1] Arguably, the earliest example of this attitude was the punk music scene of the 1970s.[2] It supports the rejection of consumer culture, using existing systems or existing processes that would foster dependence on established societal structures.

Video: Woodworking Projects