Diy Woodworking | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re after because most of the ideas and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are in fact lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are only getting started will find the thoughts and jobs in Ted’s package quite simple. Without doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to find any job of their choice in this package quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that can be found across the net. Ted has done his best to direct them in every possible way he could, through simple to comprehend textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that novices will need. You may always increase your toolbox as you get experience!

Diy Woodworking Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking magazines do a story about the best way best to improve your woodworking craft. When it’s showing you the way you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Diy Woodworking

If you’re just beginning and very interested in doing a DIY job for house afterward, woodworking could be interesting. If you do not have the proper information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first need to be very interested in woodworking. Making something new with your own hands is a special sense. Do not begin a job if you’re not interested, as this may land you in a bad location.

2. Think of the primary reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start jobs that you can finish. If you are in the midst of some work, then it is better not to start any project at all.

Finding Woodworking Projects and Plans for Beginners Diy Woodworking

If you keep these vital things in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects you want to begin with. As a newcomer, always pick a project which has a very basic construct up or a very simple construction. A few simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always proceed into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Diy Woodworking

Tools would be the ways whereby you will win the struggle of woodworking. Many people believe power tools are needs. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available in the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you in advance woodworking. You might even buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this is not a tool for beginners, but having it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking projects. Dependent on the sort of project that you would like to complete, pricing could be set. The easy the project, the less cost it involves. However, at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s better to resolve a budget on the resources, then keyword on the project. Purchasing the basic tools will ensure that you do not need to purchase any more material other than the timber ply.

Time and Directions

Directions are one of the primary things that every newcomer should follow. Instructions manual is very easy to understand the procedure, what to do and the way to do it. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which will allow you to achieve success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you understand the purpose of woodworking, then the thing that you want to build, the tools you need to own and the average time it’s possible to give daily; then you are ready to go.

Conclusion, Diy Woodworking

All these strategies and education is likely to make the woodworking projects and strategies for beginners quickly to finish. Always make sure you have all the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and planning can help you to earn a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Diy Woodworking

People if you’re trying to find a way to pass time or want an alternate way to generate money they usually turn to a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which job to begin with since you will find projects which can be too difficult for a newbie. But don’t worry about that since we will provide you guidelines on the ideal means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, so before you pick your job you have to know whether you’ve got the available resources to work on such a project. Try not to invest a lot of cash on buying gear when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no gap between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Diy Woodworking

Woodworking in your home will give you time to explore unique projects and learn so many things. That’s why it’s very important to spend less money when starting out so that you can manage to make errors and at some time learning about various projects.
It’s extremely important you know about different kinds of wood available for creating projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood they use will allow you to prepare the wood you will need for specific jobs you may want to pursue.
As soon as you understand the basics of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to fulfill your wants.

Diy Woodworking practice makes perfect so be sure you practice your work daily if at all possible. Try out a lot of layouts utilizing various tools so you can get the hang of using the tools. When starting out you can earn a number of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Diy Woodworking

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a broad array of simple projects which can allow you to develop your creative and building skills while rewarding you with artistic and practical wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s discuss where you’ll perform your woodworking, based on the dimensions of your home, you may have the ability to create a dedicated space into your woodworking activities. This may be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your very first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns located in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the remainder of the household. A good compromise might be the garage of your home.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop may not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Diy Woodworking

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Diy Woodworking if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation is not impossible, at least try to create a bench area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. At the beginning, set up a seat area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf below the bench to house your hands power tools and a pegboard above the seat to hang other gear. Install a woodworking at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Diy Woodworking

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then buy your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. You will find an abundance of quality lightly used tools out there that belong to people who embarked on that one molding project around the home or obtained tools as gifts that they will never use. You can usually buy tools for all these sellers for less than half of the original price and save even more money if you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and possibly travel expenses. Weigh out the advantages of traveling around town to save a few extra dollars on a inexpensive piece of gear. The extra expense of time and travel in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum amount of hand equipment yet produced sophisticated and complex pieces. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated noise levels. Last, wear a cap to keep the dust out of your hair. With this setup I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can prove to be the most flexible instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw can be employed to build an whole house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a quality floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want on your workshop. Buy an range of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning every drill piece to its prospective slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents occur. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might discover your palm sander with just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually requires the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps that you could spend. You can contact them for smaller adhesive jobs and expand them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you quick release mechanisms that enable the consumer to quickly open and close the limbs without dull handle turning. The wood clamping surfaces in your vice will occasionally need replacement. I would rather utilize soft pine in my vices that will not crush or damage many of the various woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape usually in the 25-foot range. Although in your store you might not use the tape at these spans, the larger tape measures provide more rigid tapes that won’t flop around and slip off the ending of planks. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape steps can last for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Diy Woodworking

Woodworking is referred to as the construction or the creation of items from wood. It is possible to create a lot of different objects from woodworking and these objects can be as large as gazebos or as little as wooden toys. No matter how large or small your private project maybe you’ll be quite likely to do that goal with woodworking. In addition, woodworking has many private as well as emotional benefits! In this guide, I am going to briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

A good deal of people who like to use their hands have turned that love into a profession through woodworking. People who build things out of wood are usually known keyword as carpenters. Carpenters can work on a variety of woodworking projects and job types. For instance, some carpenters own their carpentry company and these folks have the luxury to set their work hours. This benefit allows carpenters the chance to spend additional time with their families and also have less job strain. Raising children is a very difficult task regardless of what way you approach the task! To get a carpenter who possesses their own business, this task may not be hard since that person is going to have more time to become part of his or her child’s lifetime. By playing a larger role in the life of your child you’ll be having a larger impact on the sort of personality that kid develops into, which is a massive concern for any loving parent. In addition to such advantages, carpentry may also have health benefits as well.

Starting Your First Woodworking Shop Diy Woodworking

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a whole lot. This results in more physical activity, which results in better physical health. Keeping your body physically healthy is vital and keyword can assist in preventing the incidence of various illnesses later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and lower the odds of having a number of other disorders.

Diy Woodworking, Do It Yourself Woodworking Saves Cash:

I always feel as I paid way too much when I visit home improvement stores and buy patio furniture, and I am certain that I’m not the only person that has felt this way! A successful small business owner once told me to constantly increase the sales price of a commodity to double what you obtained it for. In this manner, you always have the option to reduce the merchandise to 50 percent away and come out without getting any losses. This seems like it may be exactly the same strategy that home improvement stores use in selling their wooden furniture products. Regardless, there’s a way which it is possible to get around paying the extra money and that has to do with building it yourself. Luckily, there are some really excellent woodworking products that offer thousands of comprehensive woodworking keyword strategies for hundreds of different job types. Thus, you can really build anything you need or see in almost any home improvement store. Doing something yourself does take a little bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

DIY ethic

DIY ethic is the ethic of self-sufficiency through completing tasks without the aid of a paid expert. The "do it yourself" (DIY) ethic promotes the idea that anyone is capable of performing a variety of tasks rather than relying on paid specialists.

The DIY ethic requires that the adherent seeks out the knowledge required to complete a given task. This ethic emerges in correspondence to the punk subculture, the DIY ethic is tied to punk ideology and anticonsumerism. Central to the ethic is the empowerment of individuals and communities, encouraging the employment of alternative approaches when faced with bureaucratic or societal obstacles to achieving their objectives.

According to the punk aesthetic, one can express oneself and produce moving and serious works with limited means.[1] Arguably, the earliest example of this attitude was the punk music scene of the 1970s.[2] It supports the rejection of consumer culture, using existing systems or existing processes that would foster dependence on established societal structures.

Video: Woodworking Tools