Dollhouse Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are after because most of the ideas and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are actually lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those who are just getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to locate any project of their choice within this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large size. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available throughout the internet. Ted has done his best to direct them in every possible way he can, through easy to understand textual directions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You may always add to your arsenal as you get experience!

Dollhouse Furniture Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Each month the writers in woodworking publications do a story about how best to improve your woodworking craft. Whether it is showing you the way to apply an end to a completed project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Dollhouse Furniture Plans

If you’re just beginning and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you might land up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential aspects you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Making something new with your own hands is a special feeling. Don’t begin a job if you are not interested, because this might land you in a terrible location.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and analyze the time that you have, before you start with a project.

4. Start jobs that you’re able to complete. If you are in the midst of a work, then it’s wise not to begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Dollhouse Furniture Plans

If you keep these vital things in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects that you want to begin with. As a beginner, always pick a project that has a very basic build up or a simple structure. A few easy to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you can always move into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Dollhouse Furniture Plans

Tools are the means through which you can win the battle of woodworking. Many people believe power tools are needs. But for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you buy a hammer, always check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available in the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them can help you in advance woodworking. You can even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for novices, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed price on woodworking jobs. Based on the sort of job that you want to complete, pricing can be determined. The simple the job, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Therefore, it is better to fix a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you do not have to purchase any more material aside from the timber ply.

Time and Directions

Directions are one of the primary things which each and every newcomer should follow. Instructions guide is very easy to understand the process, what to do and the way to do it. It keyword is a systematic guide for completing the job. Time also plays an important part in the construction of woodworking projects. Woodworking projects require time and therefore it is necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to reach success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you understand the purpose of woodworking, then the item that you want to construct, the tools you require to own and the average time it’s possible to give every day; then you’re ready to go.

Conclusion, Dollhouse Furniture Plans

All these tips and education is likely to create the woodworking projects and strategies for novices fast to complete. Always make sure that you have all the essential tools, materials, space ready. Read the instructions for building a product handy. Appropriate strategy and preparation can help you to earn a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Dollhouse Furniture Plans

Folks when trying to find a way to pass time or want an alternative method to generate money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be quite careful when choosing which project to start out with because there are projects that may be too tough for a newbie. But do not be concerned about that since we are going to give you tips on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you pick your job you need to be aware of if you’ve got the available resources to work on that project. Try not to spend a good deal of cash on buying equipment when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no gap between the hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Dollhouse Furniture Plans

Woodworking at home will give you time to explore unique jobs and learn a lot of things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at any time learning about various jobs.
It’s very important you know more about different types of wood available for creating projects. Expect carpenters use several kinds of wood quality for decorating pieces, learning what type of wood that they use will allow you to prepare the wood you will need for specific jobs you might choose to pursue.
As soon as you know the basics of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to satisfy your needs.

Dollhouse Furniture Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of designs utilizing a variety of tools so that you may get the hang of working with the tools. When starting out you can make a number of mistakes but with time you will find out how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Dollhouse Furniture Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimal amount of gear and equipment. A small home workshop may generate a broad variety of simple projects that will help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved spot on your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to set up your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the family. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Dollhouse Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Dollhouse Furniture Plans if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. At the start, set up a bench area where you can shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf below the bench to home your hands power tools along with a pegboard above the bench to hang additional gear. Install a woodworking at one end of the bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Dollhouse Furniture Plans

The reach of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at your local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality lightly used programs out there which belong to people who embarked on that one molding job around the home or obtained tools as gifts that they will never utilize. You can usually buy tools for these sellers for under half the initial price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to elevated noise levels. These can contain earplugs or complete ear keyword muff protectors. I find a excellent pair of ear muff guards is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I am shielding my eyes and my ears. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the popular name, this can prove to be the most versatile instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw could be used to construct an entire house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut corners. It’s ideal for cutting holes in timber also like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need on your workshop. Purchase an range of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber bits. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you could spend. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the consumer to rapidly open and close the jaws with no dull handle turning. The wood clamping surfaces on your vice will periodically require replacement. I prefer to utilize soft pine in my vices that will not crush or damage lots of the various woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape usually in the 25-foot range. Although in your shop you may not use the tape in these spans, the bigger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Assessing when you are by yourself will be a lot simpler, and naturally, quality tape steps can endure for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I find that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of glue through all of your projects is a little cost consideration. Therefore, it makes sense to decide on the best. I have also found over the years that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Dollhouse Furniture Plans

The peaceful satisfaction of woodworking is a wonderful adventure in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, everyone can learn the profitable skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Astolat Dollhouse Castle

Astolat Dollhouse Castle (also known as Astolat Castle or Dollhouse Castle) is a museum quality dollhouse officially appraised as "the most valuable dollhouse in the world",[1][2][3][4] at $8.5 million in 2015.[5][6][7][8]

Its great value is attributable to its hand-made intricate 800 pound, 9 foot tall, 29 room structure, and its extensive collection of high-quality miniatures including extravagant furnishings, with working fireplaces, stained glass panels, and 10,000 handcrafted miniature pieces that include original works of art, gold chandeliers, and the smallest antique Bible in the world.[9][10][11][12][13] Many of its miniatures, including some made of gold, sterling silver, and are antique and one of a kind.[14][15][16] Few other museum quality dollhouses meet such criteria.[17]

Inspired by Alfred Tennyson's poetry about the Lady of Astolat, Astolat Dollhouse Castle was created between 1974 and 1987 primarily by master miniaturist Elaine Diehl with support and assistance from artisans throughout the world.[citation needed] In addition to its 9-foot height, it has 29 rooms, hallways, corridors, sitting areas, and windows. The Colleen Moore fairy Castle Dollhouse and the Astolat Dollhouse Castle were designed with fixed contiguous exterior walls to create a three-dimensional viewing effect. Astolat was built over a thirteen-year period. The exterior took a year to sculpt to the final finish. The interiors and adjoining areas were each constructed to the highest standards of that time.[20]

Video: Woodworking Projects