Door Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they are following because all the thoughts and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. People that are just getting started will discover the thoughts and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to find any project of their choice within this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the net. Ted has done his best to direct them in every possible way he can, through easy to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools which novices will need. You can always add to your arsenal as you gain experience!

Door Furniture Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story on how best to improve your woodworking craft. Whether it is showing you the way to apply an end to a completed project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Door Furniture Plans

If you are a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking could be interesting. If you do not have the right information, education, and skill, you might land up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be very interested in woodworking. Making something new with your own hands is a special feeling. Don’t begin a job if you’re not interested, because this might land you in a bad place.

2. Consider the primary reason behind creating this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and examine the time that you have, until you begin with a job.

4. Start jobs which you can finish. If you are in the midst of a work, then it is wise not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Door Furniture Plans

If you maintain these essential things in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you wish to start with. As a newcomer, always pick a project that has a very basic build up or a simple structure. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always move into the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their resources. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Door Furniture Plans

Tools would be the ways through which you can win the battle of woodworking. Many men and women think that power tools are needs. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available in the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You can also buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the task much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking jobs. Based on the type of project you want to finish, pricing could be determined. The simple the job, the less price it involves. However, at the very beginning buying the tools will be a little hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you do not need to buy any more material aside from the wood ply.

Time and Instructions

Directions are among the principal things which each and every newcomer should follow. Instructions manual is very simple to understand the process, what to do and how to do it. Time also plays a significant role in the building of woodworking projects. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper planning. With appropriate planning and a plan, it’s possible to achieve success immediately. If you understand the objective of woodworking, the thing you need to construct, the resources you need in order to possess and the typical time you can give every day; then you are all set to go.

Conclusion, Door Furniture Plans

These tips and instruction will create the woodworking projects and strategies for novices quickly to complete. Always make sure that you have all the vital tools, materials, space ready. Keep the instructions for building a product handy. Proper strategy and preparation can help you to make a great woodworking job for your property.

|

The Benefits of Woodworking Door Furniture Plans

Folks when looking for a way to pass time or want an alternate way to make money they usually turn into a hobby that they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be quite careful when choosing which job to start out with since there are jobs that may be too tough for a newbie. But don’t be concerned about that since we are going to provide you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you choose your job you need to be aware of whether you have the available tools to work on such a project. Try not to spend a lot of money on purchasing gear when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Door Furniture Plans

Woodworking in your home will give you time to explore unique jobs and find out a lot of things. That’s why it’s important to invest less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is very important you know about different types of wood available for making jobs. Anticipate carpenters utilize different kinds of wood quality for decorating bits, learning which type of wood that they use will help you prepare the wood you’ll need for certain projects you might want to pursue.
Once you understand the basics of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do will help you in creating good jobs to fulfill your wants.

Door Furniture Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs using a variety of tools so that you may get the hang of using the tools. When starting out you may earn a range of errors but with time you will find out how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Door Furniture Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimal amount of tools and equipment. A little home workshop may produce a broad variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you’ll do your woodworking, Depending on the size of your home, you may be able to produce a dedicated space to your woodworking activities. This might be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding may be perfect to set up your first store. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however depending on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Door Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Door Furniture Plans if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation is not hopeless, at least try to make a chair area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. At the start, set up a bench area where you are able to shop and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to home your hands power tools and a pegboard over the bench to hang additional gear. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Door Furniture Plans

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools at the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. You will find plenty of quality gently used tools out there which belong to people who embarked on that one molding project around the house or received tools as gifts that they will never utilize. You can usually purchase tools for all these sellers for under half of the initial price and save even more money if you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a few added dollars on a inexpensive piece of gear. The extra cost of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand equipment yet produced sophisticated and complex pieces. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the popular name, this can prove to be the most flexible tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be employed to construct an whole property. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your second job. After choosing the right saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It is perfect for cutting holes in timber also like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want in your workshop. Purchase an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander with a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll find that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you could spend. You can contact them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of your bench is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the user to rapidly open and close the jaws without dull handle rotation. The wood clamping surfaces on your vice will occasionally require replacement. I would rather utilize soft walnut in my vices which won’t crush or damage lots of the various forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your shop you might not use the tape at these spans, the larger tape measures offer more rigid tapes which won’t flop around and slip off the end of boards. Measuring when you’re by yourself will be a great deal simpler, and naturally, quality tape measures can endure for many years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes along the way.

Adhesives: Not all glues are made equal. Avoid inexpensive home brands marketed as carpenter’s glue. The cost of glue through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Door Furniture Plans

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of furniture types

This is a list of furniture types. Furniture includes objects such as tables, chairs, beds, desks, backpacks, dressers, cupboards or electronic devices (video game consoles, computers, TV, etc.). These objects are usually kept in a house or other building to make it suitable or comfortable for living or working in.

Video: Woodworking Projects