Easy Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they are after because most of the thoughts and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are actually lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. Those who are only getting started will find the thoughts and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step by step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to find any project of their choice within this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who purchase it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Yet, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his best to guide them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Easy Shed Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you’re not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Each month the writers in woodworking magazines do a story on how best to increase your woodworking craft. Whether it is showing you the way to apply an end to a completed job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Easy Shed Plans

If you are just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking could be interesting. If you don’t have the proper information, education, and ability, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having said, there are a couple of essential aspects that you should remember, before starting with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Do not begin a project if you’re not interested, because this might land you at a terrible place.

2. Think of the main reason behind creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start jobs that you’re able to complete. If you are in the middle of some work, then it’s wise to not begin any project at all.

Starting Your First Woodworking Shop Easy Shed Plans

If you keep those essential points in mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much because it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you wish to start with. As a newcomer, always pick a project which has a very basic construct up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always move to the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Easy Shed Plans

Tools would be the ways through which you can win the struggle of woodworking. Many people think that power tools are needs. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available on the marketplace. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them will help you in advance woodworking. You can even purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the task much easy.

8. Other small and basic tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking projects. Dependent on the sort of project you want to finish, pricing could be set. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it’s better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you do not need to buy any more material aside from the wood ply.

Time and Directions

Instructions are among the principal things which each and every beginner should follow. Instructions manual is quite easy to understand the procedure, what to do and the way to get it done. It keyword is a systematic guide for finishing the job. Time also plays a significant role in the construction of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which can allow you to reach success is proper planning. With appropriate planning and a plan, it’s likely to achieve success immediately. If you know the objective of woodworking, the thing that you need to build, the tools you need to own and the typical time it’s possible to give every day; then you are all set to go.

Conclusion, Easy Shed Plans

All these strategies and instruction is likely to create the woodworking projects and strategies for novices fast to finish. Always ensure you have all the vital tools, materials, area ready. Read the instructions for constructing an item handy. Proper strategy and planning can help you to make a great woodworking project for your property.

|

The Benefits of Woodworking Easy Shed Plans

People if you’re trying to find a way to pass time or want an alternative method to generate money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which job to start out with since you will find projects that can be too difficult for a beginner. But do not be concerned about that since we will give you tips on the right means to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, so before you pick your project you have to know if you’ve got the available tools to work on that job. Try not to invest a lot of cash on buying equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the hand as well as the hands.

The Benefits of Woodworking Easy Shed Plans

Woodworking in your home will give you time to explore different projects and learn so many things. That’s why it’s very important to invest less money when starting out so that you can afford to make mistakes and at some time learning about different jobs.
It is extremely important you know more about the different types of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating bits, learning what kind of wood they use can help you prepare the wood you’ll need for certain projects you may choose to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to fulfill your needs.

Easy Shed Plans practice makes perfect so make sure that you practice your work every day if possible. Try out a lot of layouts utilizing a variety of tools so that you may get the hang of using the tools. When starting out you can earn a range of errors but with time you will find out how to correctly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Easy Shed Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of tools and equipment. A little home workshop may generate a broad array of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you will perform your woodworking, Depending on the size of your home, you might be able to produce a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your first shop. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the rest of the family. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Easy Shed Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Easy Shed Plans if you can have a dedicated spot for a marathon all the better. Floor tools and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least try to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a seat area where you are able to store and use most of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hand power tools and a pegboard above the seat to hang additional equipment. Install a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Shed Plans

The scope of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. There are an abundance of quality lightly used programs out there that belong to individuals who stumbled on that one molding project around the home or received tools as presents that they will never utilize. You can usually purchase tools for all these sellers for under half the initial price and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and perhaps travel expenses. Weigh out the advantages of traveling around town to save a few added dollars on a cheap piece of gear. The excess cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet generated sophisticated and complex bits. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire faster when subjected to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. With this setup I am shielding my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this may end up being the most versatile tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an whole house. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After choosing the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut corners. It is ideal for cutting holes in wood too like manage slots. Eventually, you’ll want to get a band saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need on your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Even though the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor version disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on your first few projects you might find that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll find this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a set of the longest clamps which you can afford. You can get in touch with them for smaller glue jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enabled the consumer to quickly open and close the limbs with no dull handle rotation. The timber beamed surfaces on your vice will occasionally require replacement. I prefer to utilize soft pine in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most often used tools. Purchase a good excellent name brand tape measure with a wide tape usually in the 25-foot selection. Although in your shop you might not be using the tape at these spans, the bigger tape measures provide more rigid tapes which will not flop around and slide off the ending of planks. Measuring when you are by yourself will be a great deal easier, and of course, quality tape measures can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are made equal. Avoid inexpensive house brands marketed as carpenter’s glue. The expense of adhesive through all your jobs is a minor cost consideration. Therefore, it makes sense to decide on the very best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Easy Shed Plans

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Law of triviality

Parkinson's law of triviality is C. Northcote Parkinson's 1957 argument that members of an organization give disproportionate weight to trivial issues.[1] Parkinson provides the example of a fictional committee whose job was to approve the plans for a nuclear power plant spending the majority of its time on discussions about relatively minor but easy-to-grasp issues, such as what materials to use for the staff bike shed, while neglecting the proposed design of the plant itself, which is far more important and a far more difficult and complex task.

The law has been applied to software development and other activities.[2] The terms bicycle-shed effect, bike-shed effect, and bike-shedding were coined as a metaphor to illuminate the law of triviality; it was popularised in the Berkeley Software Distribution community by the Danish software developer Poul-Henning Kamp in 1999[3] and has spread from there to the whole software industry.

The concept was first presented as a corollary of his broader "Parkinson's law" spoof of management. He dramatizes this "law of triviality" with the example of a committee's deliberations on an atomic reactor, contrasting it to deliberations on a bicycle shed. As he put it: "The time spent on any item of the agenda will be in inverse proportion to the sum [of money] involved." A reactor is so vastly expensive and complicated that an average person cannot understand it, so one assumes that those who work on it understand it. On the other hand, everyone can visualize a cheap, simple bicycle shed, so planning one can result in endless discussions because everyone involved wants to add a touch and show personal contribution.[4]

Video: Woodworking Tools