Easy Small Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re after because most of the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step-by-step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice within this bundle quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to guide them in every possible way he can, through easy to comprehend textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Easy Small Wood Projects

Woodworking is one hobby that could also be a rewarding career if you like to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will be able to build all types of furniture, (table, beds, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Easy Small Wood Projects.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you’ll have the ability to create some really nice furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They will ask: How did you create it? How long can it take to finish the job? What type of wood did you use? What type of tools did you use? How on earth did you create such a gorgeous item of furniture? As you discuss your job, a feeling of pride will encounter you and don’t be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Easy Small Wood Projects

If you are thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Easy Small Wood Projects.

Begin with a concept in your mind of what you would like to construct then get a excellent woodworking project plan that is geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking merchants. A few woodworking program suggestions to get you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a couple. Of course, you can begin with as expansive a woodworking program as you choose. On the other hand, the chances are if you begin using a small woodworking job at first, you’ll have a better prospect of keyword completing the project.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the amount and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking gear, but you can easily break the bank buying a great deal of tools you may not use all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood adhesive! Obviously, you will need a dry area to work and might need a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools which beginners will need. You can always increase your arsenal as you gain experience!

Easy Small Wood Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking publications do a story about the best way to improve your woodworking craft. Whether it’s showing you the way to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Easy Small Wood Projects

If you’re a beginner and very interested in doing a DIY project for home then, woodworking could be interesting. If you don’t have the right information, education, and ability, you may land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a couple of essential aspects that you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Creating something new with your hands is a special feeling. Don’t start a job if you are not interested, as this may land you in a terrible place.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your skills and analyze the time you have, before you begin with a project.

4. Start jobs that you can finish. If you are in the midst of a work, then it is better to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Easy Small Wood Projects

If you keep those essential things in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you wish to start with. As a newcomer, always pick a job that has a very basic build up or a simple structure. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Easy Small Wood Projects

Tools are the means whereby you will win the struggle of woodworking. Many men and women believe power tools are needs. But for beginners, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the market. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You might even buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but using it might make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking jobs. Dependent on the sort of job you want to finish, pricing can be determined. The easy the project, the less cost it involves. But at the beginning buying the tools will be a little hefty. Therefore, it is better to resolve a budget on the tools, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t have to purchase any more material other than the timber ply.

Time and Instructions

Instructions are one of the principal things that each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and the way to get it done. Time also plays an important part in the construction of woodworking jobs. Woodworking projects demand time and so it’s crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that can help you to reach success is proper planning. With proper planning and a plan, it’s possible to achieve success immediately. If you understand the objective of woodworking, the item you need to construct, the resources you require to possess and the average time you can give daily; then you’re all set to go.

Conclusion, Easy Small Wood Projects

All these tips and instruction is likely to make the woodworking projects and plans for beginners fast to complete. Always make sure you have all the essential tools, materials, space prepared. Read the instructions for building a product handy. Proper strategy and planning will help you to make a fantastic woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Small Wood Projects

People if you’re looking for a way to pass time or desire an alternate way to make money they usually turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which project to begin with since you will find jobs that can be too difficult for a newbie. But don’t worry about that since we are going to provide you guidelines on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your job you need to be aware of if you have the available resources to work on that project. Try not to spend a lot of money on buying gear when starting out, purchase more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Easy Small Wood Projects

Woodworking in your home will give you time to research unique jobs and find out so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about various projects.
It’s extremely important that you know more about the different types of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating bits, learning which type of wood they use will help you prepare the wood you’ll need for certain projects you may want to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to fulfill your wants.

Easy Small Wood Projects practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of layouts utilizing various tools so that you can get the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Easy Small Wood Projects

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad variety of simple projects which can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will perform your woodworking, Depending on the dimensions of your house, you may be able to create a dedicated space into your woodworking activities. This might be a reserved place in your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without bothering the remainder of the household. A fantastic compromise might be the garage of your home.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Easy Small Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Easy Small Wood Projects if you can have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and equipment. In the start, set up a seat area where you can shop and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will let you work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools along with a pegboard above the seat to hang additional equipment. Put in a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Small Wood Projects

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality gently used tools out there that belong to people who embarked on that 1 molding job around the home or obtained tools as gifts which they won’t ever use. You can usually purchase tools for all these sellers for less than half the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a couple extra dollars on a cheap piece of gear. The excess expense of travel and time in these situations is generally justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum amount of hand gear yet generated sophisticated and intricate bits. Focus on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the popular name, this can prove to be the most flexible tool in a startup workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an whole house. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your next job. After choosing the right saw install a quality blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It’s perfect for cutting holes in timber too like manage slots. At some point, you’ll want to get a ring saw. Bandsaws are much more versatile but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t need in your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill piece to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Even though the most frequent, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander with a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it usually requires the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the maximum clamps that you can afford. You may contact them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of your seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the consumer to quickly open and close the jaws with no dull handle turning. The wood beamed surfaces on your vice will occasionally require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most frequently used tools. Purchase a fantastic quality name brand tape measure with a wide tape usually in the 25-foot range. Even though in your shop you may not be using the tape in these lengths, the bigger tape measures offer more rigid tapes which will not flop around and slip off the end of boards. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape measures can last for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the right angles in addition to compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. The cost of glue through all your projects is a little cost consideration. For that reason, it is sensible to go with the very best. I also have discovered over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Easy Small Wood Projects

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Wood

Wood is a porous and fibrous structural tissue found in the stems and roots of trees and other woody plants. It is an organic material, a natural composite of cellulose fibers that are strong in tension and embedded in a matrix of lignin that resists compression. Wood is sometimes defined as only the secondary xylem in the stems of trees,[1] or it is defined more broadly to include the same type of tissue elsewhere such as in the roots of trees or shrubs.[citation needed] In a living tree it performs a support function, enabling woody plants to grow large or to stand up by themselves. It also conveys water and nutrients between the leaves, other growing tissues, and the roots. Wood may also refer to other plant materials with comparable properties, and to material engineered from wood, or wood chips or fiber.

Wood has been used for thousands of years for fuel, as a construction material, for making tools and weapons, furniture and paper. More recently it emerged as a feedstock for the production of purified cellulose and its derivatives, such as cellophane and cellulose acetate.

As of 2005, the growing stock of forests worldwide was about 434 billion cubic meters, 47% of which was commercial.[2] As an abundant, carbon-neutral renewable resource, woody materials have been of intense interest as a source of renewable energy. In 1991 approximately 3.5 billion cubic meters of wood were harvested. Dominant uses were for furniture and building construction.[3]

Video: Woodworking Tools