Easy Stuff To Build With Wood | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking when they are following because most of the thoughts and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure whether they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the ideal option. There are actually many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. People who are just getting started will discover the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice within this package quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who buy it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found across the internet. Ted has done his best to guide them in every possible way he could, through easy to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find inside. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which beginners will need. You can always increase your arsenal as you get experience!

Easy Stuff To Build With Wood Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. When it’s showing you how to apply an end to a finished job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Stuff To Build With Wood

If you’re a beginner and very interested in doing a DIY project for home afterward, woodworking could be fun. If you do not have the proper information, education, and ability, you may land up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not start a job if you are not interested, because this might land you in a bad place.

2. Consider the main reason for making this woodworking project. Choose the uses of this thing you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start jobs that you’re able to finish. If you are in the middle of a work, then it is better to not begin any project in any way.

How to Become a Master Woodworker From Your Own Home Easy Stuff To Build With Wood

If you maintain these essential points in your mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs that you wish to start with. As a newcomer, always select a job which has quite a basic construct up or a simple construction. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you can always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so you have a better knowledge of working with forests and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Easy Stuff To Build With Wood

Tools are the means through which you can win the battle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, constantly assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You might even purchase keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills can make the task much easy.

8. Additional small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking projects. Based on the type of job that you want to complete, pricing could be set. The simple the project, the less cost it involves. However, at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the project. Buying the fundamental tools will make certain you do not need to purchase any more material aside from the timber ply.

Time and Directions

Instructions are among the principal things which each and every beginner should follow. Instructions manual is very simple to understand the procedure, what to do and the way to do it. It keyword is a systematic manual for finishing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that will help you to achieve success is proper planning. With proper planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the item that you need to build, the tools you require in order to own and the average time you can devote daily; then you are all set to go.

Conclusion, Easy Stuff To Build With Wood

These tips and instruction will make the woodworking projects and strategies for beginners quickly to complete. Always make sure that you have all the essential tools, materials, area prepared. Read the instructions for constructing a product handy. Proper strategy and planning can allow you to make a fantastic woodworking job for your home.

|

Starting Your First Woodworking Shop Easy Stuff To Build With Wood

People when looking for a way to pass time or desire an alternative method to generate money they generally turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which project to begin with since there are jobs that can be too difficult for a beginner. But do not worry about that since we are going to provide you tips on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, therefore before you pick your project you need to know if you’ve got the available resources to work on that job. Try not to invest a good deal of money on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Easy Stuff To Build With Wood

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research unique projects and learn so many things. That’s why it’s important to invest less money when starting out so you can afford to make errors and at any time learning about various projects.
It’s very important that you know more about different kinds of wood available for making jobs. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning which type of wood that they use will allow you to prepare the wood you’ll need for specific projects you may choose to pursue.
Once you know the basics of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

Easy Stuff To Build With Wood practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs using various tools so you may find the hang of working with the tools. When starting out you may make a range of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Stuff To Build With Wood

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimal number of tools and equipment. A small home workshop may generate a wide array of simple projects that can help you develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you’ll do your woodworking, Depending on the dimensions of your home, you may have the ability to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust that travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the top levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your home.

This can help minimize the problems of dust and noise, however based on where you live, a keyword garage layout may not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Easy Stuff To Build With Wood

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to work in. Easy Stuff To Build With Wood if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top gear can stay in place from project to project. If this installation isn’t impossible, at least try to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the beginning, establish a bench area where you can store and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to home your hand power tools and a pegboard above the seat to hang additional gear. Put in a woodworking at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Stuff To Build With Wood

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools at the regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used tools out there which belong to individuals who stumbled on that 1 molding job around the home or received tools as presents that they will never utilize. You can usually buy tools for all these sellers for less than half of the original price and save even more money should you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will take additional time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple extra dollars on a inexpensive piece of gear. The excess expense of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the gear you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this may prove to be the most versatile instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw could be employed to construct an entire house. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your second project. After selecting the right saw install an excellent blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut corners. It’s ideal for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents happen. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander using just a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools allow you to taper borders, sew high stains and correct any imperfections in timber pieces. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a pair of the longest clamps which you could afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to quickly open and close the limbs without dull handle turning. The timber clamping surfaces on your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage many of the various forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your shop you might not use the tape at these spans, the larger tape steps offer more rigid tapes that will not flop around and slide off the end of planks. Measuring when you’re on your own will be a great deal easier, and of course, quality tape steps can last for many decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles as well as compound angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not all glues are made equal. Avoid inexpensive home brands sold as carpenter’s glue. The expense of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the best. I have also discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Easy Stuff To Build With Wood

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Band of Brothers (miniseries)

Band of Brothers is a 2001 American war drama miniseries based on historian Stephen E. Ambrose's 1992 non-fiction book Band of Brothers.[3] The executive producers were Steven Spielberg and Tom Hanks, who had collaborated on the 1998 World War II film Saving Private Ryan.[4] The episodes first aired in 2001 on HBO. The series won Emmy and Golden Globe awards in 2001 for best miniseries.

The series dramatizes the history of "Easy" Company, 2nd Battalion, 506th Parachute Infantry Regiment, of the 101st Airborne Division, from jump training in the United States through its participation in major actions in Europe, up until Japan's capitulation and the war's end. The events are based on Ambrose's research and recorded interviews with Easy Company veterans. The series took literary license, adapting history for dramatic effect and series structure.[5][6] The characters portrayed are based on members of Easy Company. Some of the men were recorded in contemporary interviews, which viewers see as preludes to several episodes, with the men's real identities revealed in the finale.

The title for the book and series comes from the St Crispin's Day Speech in William Shakespeare's play Henry V, delivered by King Henry before the Battle of Agincourt. Ambrose quotes a passage from the speech on his book's first page; this passage is spoken by Carwood Lipton in the series finale.

Video: Woodworking Tools