Easy Stuff To Make Out Of Wood | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re following because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. People that are just getting started will find the ideas and jobs in Ted’s bundle quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this bundle quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it will be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Yet, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found across the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You may always increase your arsenal as you gain experience!

Easy Stuff To Make Out Of Wood Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the authors in woodworking publications do a story on how to increase your woodworking craft. When it is showing you how to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Stuff To Make Out Of Wood

If you are just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you don’t have the proper information, instruction, and skill, you might wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential aspects you should remember, before starting with any woodworking project.

1. If you’re just beginning, you should first need to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not start a job if you are not interested, as this may land you in a bad place.

2. Think of the main reason for making this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and examine the time that you have, until you begin with a job.

4. Start jobs that you’re able to finish. If you are in the middle of a work, then it’s better not to begin any project at all.

Starting Your First Woodworking Shop Easy Stuff To Make Out Of Wood

If you keep these essential things in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to begin with. As a newcomer, always select a job that has a very basic construct up or a very simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning projects should keyword be less complicated and less bothersome so that you have a better knowledge of working with forests and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Easy Stuff To Make Out Of Wood

Tools are the means through which you can win the battle of woodworking. Many people believe power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws available in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it might make work easier for you in a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Dependent on the sort of job that you want to complete, pricing can be set. The easy the project, the less cost it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it is much better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Instructions

Directions are among the primary things which each and every newcomer should follow. Instructions manual is very easy to comprehend the process, what to do and the way to get it done. Time also has a significant part in the building of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success immediately. If you know the purpose of woodworking, the thing you need to build, the resources you need to own and the average time it’s possible to give every day; then you’re all set to go.

Conclusion, Easy Stuff To Make Out Of Wood

All these tips and education will make the woodworking projects and plans for novices fast to complete. Always make sure you have all the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and preparation can help you to make a great woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Easy Stuff To Make Out Of Wood

Folks when trying to find a way to pass time or desire an alternate way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which job to start out with because there are projects that can be too difficult for a beginner. But don’t worry about that since we are going to provide you tips on the right way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your project you have to know if you’ve got the available resources to work on that job. Try not to spend a lot of money on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the artistic hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Easy Stuff To Make Out Of Wood

Woodworking in your home will give you time to research different projects and learn so many things. That is why it’s very important to invest less money when starting out so you can manage to make mistakes and at any time learning about various projects.
It is extremely important that you know about different kinds of wood available for creating projects. Anticipate carpenters use several types of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you will need for specific projects you might choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Easy Stuff To Make Out Of Wood practice makes perfect so make sure you practice your work every day if possible. Try out a lot of layouts utilizing various tools so you may get the hang of using the tools. When starting out you can make a number of mistakes but with time you will find out how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Easy Stuff To Make Out Of Wood

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of tools and equipment. A small home workshop can produce a broad array of simple projects which can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you’ll perform your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first store. A heated store detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the remainder of the household. A fantastic compromise could be the garage of your home.

This might help decrease the difficulties of dust and sound, however depending on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Stuff To Make Out Of Wood

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Easy Stuff To Make Out Of Wood if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a bench area where you are able to store and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools and a pegboard above the seat to hang additional equipment. Install a woodworking vice at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Stuff To Make Out Of Wood

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools in the local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional ads. There are an abundance of quality lightly used tools out there that belong to people who embarked on that 1 molding job around the house or received tools as gifts which they will never utilize. You can usually buy tools for all these sellers for less than half of the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple added bucks on a cheap piece of gear. The extra cost of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand gear yet generated sophisticated and intricate pieces. Focus on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the popular brand name, this may prove to be the most flexible tool in a startup workshop. In reality, at the hands of a professional, a power hand saw could be employed to build an whole house. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your second project. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t only cut curves. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t need in your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill piece to its prospective slot at the holder after every use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander using a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in wood pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the novice woodworker a few years to accumulate a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Receive a set of the maximum clamps which you can afford. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of your bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enable the user to quickly open and close the limbs with no dull handle rotation. The timber beamed surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices which will not crush or damage many of the different woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among your most frequently used tools. Buy a good quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not use the tape in these lengths, the larger tape measures provide more rigid tapes that won’t flop around and slide off the end of boards. Measuring when you’re by yourself will be a lot easier, and naturally, quality tape measures can endure for several years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Get the number two and three Robertson set. I find that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The expense of adhesive through all of your projects is a minor cost consideration. Therefore, it is sensible to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Easy Stuff To Make Out Of Wood

The peaceful satisfaction of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Out of the Woods (song)

"Out of the Woods" is a song by American singer-songwriter Taylor Swift. The song was written and produced by Swift and Jack Antonoff of fun.. It was the second song to be officially released from her fifth studio album 1989, serving as the first promotional single on October 14, 2014.[1][2] It is the fourth track on the album, after "Style". "Out of the Woods" serves as the sixth official single with an accompanying music video that premiered on December 31, 2015, during Dick Clark's New Year's Rockin' Eve on ABC. It was released to radio on February 5, 2016.[3] The song went number one in Israel and has reached the top 10 in Belgium, Canada, and New Zealand as well as the top 20 in Australia and the United States.

Swift premiered a 15-second clip of "Out of the Woods" on Good Morning America on October 13, 2014.[4] Swift called "Out of the Woods" one of her "favorite songs on this album because it best represents 1989."[1][5] She explained that the song is about "the fragility and breakable nature of some relationships. This was a relationship where I was kind of living day-to-day wondering where it was going, if it was going to go anywhere, if it was going to end the next day."[6] "Out of the Woods" was initially released as a promotional single on October 14, 2014,[7] with no plans for a music video or an official release.[8] On December 22, 2015, Good Morning America officially announced the release of a music video for the song to premiere during Dick Clark's New Year's Rockin' Eve.[citation needed] "Out of the Woods" also serves as the sixth official single from 1989,[9] and it was released to radio stations on February 5, 2016.[3]

"Out of the Woods" is a pop[12][13] and synth-pop song.[14] The track was written and produced by Swift and Antonoff and is the first song that Swift has written to an existing track. Antonoff sent an early version of the song without the vocals or lyrics to Swift, which she then added in just 30 minutes. Speculation as to whom the song is about is rampant.[8] The bridge section of the song references the snowmobile incident that Swift and her former boyfriend, One Direction's Harry Styles, were reported to be involved in during their relationship.[15] Max Martin produced Swift's vocals for the song.[16] It is written in the key of C major with Swift's vocals spanning two octaves, between G3 and E5[17] and runs three minutes and fifty-five seconds (3:55), at 92 bpm.[18]

Video: Woodworking Tools