Easy Things To Build Out Of Wood | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because most of the ideas and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more challenging to make the ideal choice. There are actually lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is involved; nonetheless, they will find it really easy to follow Ted’s simple step-by-step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice within this bundle quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his best to direct them in every possible way he could, through simple to comprehend textual directions, clear images and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools that beginners will need. You may always increase your arsenal as you gain experience!

Easy Things To Build Out Of Wood Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Each month the authors in woodworking magazines do a story on how to increase your woodworking craft. When it’s showing you the way to apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

The Benefits of Woodworking Easy Things To Build Out Of Wood

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you do not have the right information, education, and skill, you might wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a few essential aspects you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a job if you are not interested, as this may land you at a bad location.

2. Think of the main reason behind making this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and examine the time you have, until you start with a job.

4. Start projects that you can finish. If you are in the midst of a work, then it’s wise to not begin any project at all.

The Benefits of Woodworking Easy Things To Build Out Of Wood

If you maintain these vital things in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to start with. As a beginner, always pick a project which has quite a basic build up or a simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Easy Things To Build Out Of Wood

Tools are the means through which you can win the struggle of woodworking. Many men and women believe power tools are requires. But for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might even purchase keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed price on woodworking projects. Based on the type of job you want to finish, pricing could be determined. The simple the project, the less cost it involves. However, at the very beginning buying the tools will be a little hefty. Therefore, it’s much better to resolve a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to purchase any more material aside from the wood ply.

Time and Instructions

Directions are among the principal things that each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite easy to comprehend the process, what to do and how to do it. It keyword is a systematic manual for finishing the project. Time also has a significant role in the construction of woodworking projects. Woodworking projects require time and so it is necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which will help you to achieve success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you know the objective of woodworking, then the thing that you need to build, the resources you need in order to own and the average time you can give every day; then you are ready to go.

Conclusion, Easy Things To Build Out Of Wood

All these strategies and education is likely to create the woodworking projects and plans for novices fast to complete. Always make sure that you have all of the essential tools, materials, area ready. Read the instructions for building a product handy. Proper strategy and preparation will help you to earn a fantastic woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Easy Things To Build Out Of Wood

People when trying to find a way to pass time or want an alternate way to make money they usually turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be quite careful when choosing which project to begin with since there are projects that may be too difficult for a newbie. But do not be concerned about that because we are going to provide you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you have to be aware of whether you have the available resources to work on that job. Try not to invest a lot of cash on buying gear when starting out, purchase more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the hand as well as the hands.

The Benefits of Woodworking Easy Things To Build Out Of Wood

Woodworking at home will provide you time to explore different projects and find out so many things. That is why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about different projects.
It’s extremely important that you know about the different types of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating pieces, learning which kind of wood they use can allow you to prepare the wood you’ll need for certain projects you might want to pursue.
As soon as you know the basics of wood selection and the use of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to fulfill your needs.

Easy Things To Build Out Of Wood practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs utilizing various tools so you may get the hang of using the tools. When starting out you can make a number of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Things To Build Out Of Wood

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum number of tools and equipment. A small home workshop can generate a broad array of simple projects that will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will do your woodworking, Depending on the size of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the household. A good compromise could be the garage of your property.

This can help minimize the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Easy Things To Build Out Of Wood

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they add more space to function in. Easy Things To Build Out Of Wood if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top gear can stay in position from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, establish a bench area where you are able to store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will let you work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools along with a pegboard above the bench to hang additional gear. Install a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Things To Build Out Of Wood

The scope of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools in your local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are an abundance of quality lightly used programs out there that belong to individuals who stumbled on that one molding job around the house or received tools as presents which they won’t ever use. You can usually purchase tools for all these sellers for under half of the original cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenditures. Weigh the advantages of traveling around town to save a couple extra bucks on a inexpensive piece of equipment. The extra expense of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand equipment yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to elevated noise levels. Last, wear a cap to keep the dust from your hair. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw following the popular name, this can end up being the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to construct an whole property. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you start your next job. After choosing the proper saw install a quality blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade. All these have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut corners. It is perfect for cutting holes in wood too like manage slots. At some point, you’ll want to get a band saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life will be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not want in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its potential slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander with just a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll find this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber bits. {Start with a typical amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure remains the same. Get a pair of the maximum clamps that you could afford. You may contact them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the consumer to rapidly open and close the limbs without dull handle turning. The timber beamed surfaces in your vice will occasionally require replacement. I would rather utilize soft walnut in my vices which will not crush or damage lots of the different woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a good quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not be using the tape in these lengths, the larger tape measures provide more rigid tapes which will not flop around and slide off the end of planks. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape steps can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as compound angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The expense of adhesive through all of your projects is a little cost consideration. For that reason, it makes sense to go with the best. I also have found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Easy Things To Build Out Of Wood

The peaceful gratification of woodworking is a wonderful experience in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding skills of his time-tested avocation and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Joiner

A joiner is an artisan who builds things by joining pieces of wood, particularly lighter and more ornamental work than that done by a carpenter, including furniture and the "fittings" of a house, ship, etc.[1] Joiners may work in a workshop, because the formation of various joints is made easier by the use of non-portable, powered machinery, or on job site. A joiner usually produces items such as interior and exterior doors, windows, stairs, tables, bookshelves, cabinets, furniture, etc. In shipbuilding a marine joiner may work with materials other than wood such as linoleum, fiberglass, hardware, and gaskets.[2]

In the UK, an apprentice of wood occupations could choose to study bench joinery or site carpentry and joinery. Bench joinery is the preparation, setting out, and manufacture of joinery components while site carpentry and joinery focus on the installation of the joinery components, and on the setting out and fabrication of timber elements used in construction.

Video: Woodworking Tools