Easy Things To Build With Wood | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they are after because most of the thoughts and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice in this package quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found across the internet. Ted has done his very best to guide them in every possible way he can, through simple to understand textual directions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it is definitely worth buying!

The Benefits of Woodworking Easy Things To Build With Wood

Woodworking is one hobby that could also be a rewarding career if you love to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all types of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Easy Things To Build With Wood.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will have the ability to build some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It will be a subject of conversation when you have friends come over to visit. They’ll ask: How can you make it? How long did it take to finish the job? What type of tools did you use? How on earth did you create such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Easy Things To Build With Wood

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Easy Things To Build With Wood.

Begin with an idea in your mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are several small woodworking projects for beginners available for sale from online woodworking merchants. A couple of woodworking plan suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to name a couple. Of course, you can begin with as grand a woodworking program as you choose. On the other hand, the chances are if you begin using a little woodworking project at first, you will get a better chance of keyword completing the project.

Your woodworking project plan should include some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the essential hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Just buy what you need to complete your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you might not use all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood glue! Obviously, you will require a dry place to work and may need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Easy Things To Build With Wood Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the authors in woodworking magazines do a story on how to improve your woodworking craft. Whether it is showing you the way you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Things To Build With Wood

If you are a beginner and very interested in doing a DIY job for home then, woodworking could be fun. If you do not have the right information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have time and the correct tools. Having mentioned, there are a few essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a job if you are not interested, as this may land you at a terrible place.

2. Think of the main reason for creating this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start jobs which you can complete. If you’re in the middle of some work, then it is wise to not start any project in any way.

Starting Your First Woodworking Shop Easy Things To Build With Wood

If you maintain these vital points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you want to start with. As a beginner, always pick a project that has a very basic construct up or a very simple structure. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Easy Things To Build With Wood

Tools are the means whereby you will win the battle of woodworking. A lot of people think that power tools are requires. However, for beginners, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there on the marketplace. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Additional small and basic tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Dependent on the sort of job that you would like to finish, pricing could be determined. The easy the job, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Because of this, it is better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t have to buy any more material aside from the wood ply.

Time and Instructions

Instructions are one of the primary things that each and every newcomer should follow. Instructions guide is very simple to comprehend the process, what to do and the way to get it done. Time also plays a significant part in the construction of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword that will help you to achieve success is proper planning. With proper planning and a strategy, it’s likely to achieve success immediately. If you know the purpose of woodworking, then the item that you need to build, the tools you need to possess and the typical time it’s possible to devote every day; then you’re all set to go.

Conclusion, Easy Things To Build With Wood

These strategies and instruction will make the woodworking projects and plans for novices fast to complete. Always ensure that you have all of the vital tools, materials, space prepared. Keep the instructions for building a product handy. Proper strategy and planning can allow you to earn a great woodworking job for your home.

|

The Benefits of Woodworking Easy Things To Build With Wood

People if you’re looking for a way to pass time or desire an alternate way to generate money they usually turn into a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be very cautious when choosing which project to begin with because there are jobs that may be too tough for a beginner. But do not be concerned about that since we are going to give you guidelines on the ideal means to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you pick your job you have to know if you have the available tools to work on such a project. Try not to spend a good deal of money on purchasing gear when starting out, purchase more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Things To Build With Wood

Woodworking at home will provide you time to explore different projects and learn a lot of things. That is why it’s very important to invest less money when starting out so you can manage to make mistakes and at any time learning about different jobs.
It’s very important that you know more about different types of wood available for creating projects. Expect carpenters use several kinds of wood quality for decorating bits, learning what kind of wood they use can allow you to prepare the wood you will need for certain jobs you might choose to pursue.
Once you understand the basics of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

Easy Things To Build With Wood practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts using various tools so that you can get the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will find out how to correctly use them and create quality projects.

|

The Benefits of Woodworking Easy Things To Build With Wood

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal amount of tools and equipment. A little home workshop can generate a wide variety of simple projects which will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your house, you may have the ability to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably create dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the top levels of the house. Another advantage of detached workshops is, clearly, the noise level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Easy Things To Build With Wood

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Easy Things To Build With Wood if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can remain in place from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. In the start, set up a bench area where you are able to store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to home your hands power tools along with a pegboard over the bench to hang additional equipment. Put in a woodworking vice at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Things To Build With Wood

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in the local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional ads. There are plenty of quality gently used tools out there that belong to people who stumbled on that one molding job around the home or obtained tools as gifts which they won’t ever use. You can usually buy tools for these sellers for under half of the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The excess expense of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you had.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the popular name, this may prove to be the most flexible tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be used to build an whole property. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next project. After selecting the right saw install a quality blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It is ideal for cutting holes in timber too like handle slots. At some point, you’re going to want to get a band saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their battery life will be bad and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need on your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor version disc and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might find your palm sander with a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in wood bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a set of the maximum clamps which you can afford. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enable the consumer to rapidly open and close the jaws without tedious handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I would rather use soft walnut in my vices that won’t crush or damage many of the various woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your shop you might not use the tape at these lengths, the larger tape measures offer more rigid tapes that will not flop around and slip off the end of planks. Measuring when you’re by yourself will be a great deal easier, and of course, quality tape measures can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as compound angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The cost of glue through all of your projects is a little cost consideration. For that reason, it makes sense to decide on the very best. I have also found over time that I receive the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Easy Things To Build With Wood

The peaceful satisfaction of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Joiner

A joiner is an artisan who builds things by joining pieces of wood, particularly lighter and more ornamental work than that done by a carpenter, including furniture and the "fittings" of a house, ship, etc.[1] Joiners may work in a workshop, because the formation of various joints is made easier by the use of non-portable, powered machinery, or on job site. A joiner usually produces items such as interior and exterior doors, windows, stairs, tables, bookshelves, cabinets, furniture, etc. In shipbuilding a marine joiner may work with materials other than wood such as linoleum, fiberglass, hardware, and gaskets.[2]

In the UK, an apprentice of wood occupations could choose to study bench joinery or site carpentry and joinery. Bench joinery is the preparation, setting out, and manufacture of joinery components while site carpentry and joinery focus on the installation of the joinery components, and on the setting out and fabrication of timber elements used in construction.

Video: Woodworking Projects