Easy Wood Designs | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are following because all the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are actually many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and jobs in Ted’s package quite easy. No doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s simple step-by-step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice within this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found across the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to understand textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools which novices will need. You can always increase your toolbox as you gain experience!

Easy Wood Designs Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the writers in woodworking magazines do a story about how best to increase your woodworking craft. When it is showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Easy Wood Designs

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you don’t have the proper information, instruction, and skill, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a few essential factors you need to remember, before starting with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Making something new with your hands is a special sense. Don’t begin a job if you are not interested, as this may land you in a terrible place.

2. Consider the main reason for creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and examine the time you have, before you start with a job.

4. Start projects that you’re able to finish. If you are in the middle of some work, then it’s wise not to begin any project in any way.

Starting Your First Woodworking Shop Easy Wood Designs

If you maintain those vital points in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you wish to begin with. As a beginner, always pick a job that has a very basic construct up or a very simple structure. Some simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always proceed into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so you have a better knowledge of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Easy Wood Designs

Tools would be the ways whereby you will win the battle of woodworking. A lot of people think that power tools are requires. But for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, always assess the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws available on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You might even purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking projects. Based on the sort of job that you want to finish, pricing could be set. The simple the project, the less price it involves. However, at the beginning buying the tools will be a little hefty. Therefore, it is much better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not have to purchase any more material other than the timber ply.

Time and Instructions

Directions are one of the principal things that every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite simple to understand the procedure, what to do and the way to get it done. It keyword is a systematic manual for finishing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. But the most indispensable thing keyword which will allow you to reach success is proper preparation. With proper planning and a plan, it is possible to achieve success quickly. If you know the purpose of woodworking, then the item that you need to construct, the resources you need in order to possess and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Easy Wood Designs

These strategies and education will create the woodworking projects and plans for novices quickly to complete. Always make sure you have all the vital tools, materials, area prepared. Read the instructions for building a product handy. Appropriate strategy and planning can allow you to make a great woodworking project for your property.

|

The Benefits of Woodworking Easy Wood Designs

Folks when looking for a way to pass time or desire an alternative way to generate money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be very cautious when choosing which job to start out with since you will find jobs which may be too difficult for a beginner. But don’t worry about that because we are going to provide you tips on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you pick your job you have to know if you have the available tools to work on such a project. Try not to invest a good deal of money on buying gear when starting out, purchase more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the hand as well as the normal hands.

Starting Your First Woodworking Shop Easy Wood Designs

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will give you time to explore unique jobs and learn a lot of things. That is why it’s important to invest less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It’s extremely important you know more about different kinds of wood available for making projects. Anticipate carpenters use several types of wood quality for decorating pieces, learning which kind of wood that they use can help you prepare the wood you’ll need for certain projects you might want to pursue.
As soon as you know the basics of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good projects to fulfill your wants.

Easy Wood Designs practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so you can find the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Easy Wood Designs

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal number of gear and equipment. A small home workshop can produce a wide variety of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you’ll do your woodworking, based on the dimensions of your home, you might have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your first shop. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the remainder of the household. A fantastic compromise could be the garage of your home.

This can help minimize the problems of dust and sound, however depending on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Easy Wood Designs

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Easy Wood Designs if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation is not impossible, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the start, set up a seat area where you are able to shop and use the majority of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hand power tools and a pegboard over the bench to hang other gear. Install a woodworking vice at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Wood Designs

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find plenty of quality gently used programs out there that belong to people who stumbled on that one molding project around the house or received tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for under half of the original cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require extra time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple extra dollars on a cheap piece of gear. The excess cost of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together if you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to elevated noise levels. Select powerful hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust from your hair. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often known as a skill saw following the favorite name, this may prove to be the most flexible instrument in a startup workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an whole property. Eventually, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next job. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It’s perfect for cutting holes in wood also like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Through tough lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want in your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents happen. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The mind usually comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander using a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper borders, sew high stains and fix any imperfections in timber pieces. {Begin with a standard amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it usually requires the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a pair of the maximum clamps that you can spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer quick release mechanisms that enabled the consumer to quickly open and close the limbs with no dull handle rotation. The wood clamping surfaces in your vice will periodically require replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the different forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically in the 25-foot range. Although in your store you may not use the tape at these lengths, the larger tape steps provide more rigid tapes that won’t flop around and slip off the end of boards. Measuring when you’re by yourself will be a lot simpler, and of course, quality tape measures can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes on the way.

Adhesives: Not all glues are made equal. Avoid cheap house brands sold as carpenter’s glue. The cost of glue through all your jobs is a little cost consideration. Therefore, it makes sense to go with the best. I also have found over time that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Easy Wood Designs

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Split-rail fence

A split-rail fence or log fence (also known as a zigzag fence, worm fence or snake fence historically due to its meandering layout) is a type of fence constructed in the United States and Canada, and is made out of timber logs, usually split lengthwise into rails and typically used for agricultural or decorative fencing. Such fences require much more timber than other types of fences, and so are generally only common in areas where wood is abundant. However, they are very simple in their construction, and can be assembled with few tools even on hard or rocky ground. They also can be built without using any nails or other hardware; such hardware was often scarce in frontier areas. They are particularly popular in very rocky areas where post hole digging is almost impossible. They can even be partially or wholly disassembled if the fence needs to be moved or the wood becomes more useful for other purposes. During the American Civil War, these split rail fences were a major source of firewood for both the Union and Confederate armies.

Split rail fences were made of easy to split, rot-resistant wood. Traditionally American chestnut was the timber of choice until chestnut blight eliminated this tree. Currently, most split rails are made from cedar. Whether of chestnut or cedar, these logs were cut to a length of 10 to 12 feet (3.0 to 3.7 m) and split down the length of the log. Each half was then split into quarters, then eighths and so on until the rails were of a usable size. A log may produce from four rails from an 8-inch (20 cm) log to over a dozen from larger logs. The rails are stacked on top of one another. Most split rail fences have the rails stacked in an interlocking zig-zag fashion that is self-supporting, easy to create, easy to repair, and easy to disassemble.

Some timber fences have the rails stacked directly on top of each other and secured with double fence posts (one on either side of the rails). This made a more permanent and compact fence but remained easy to repair.

Video: Woodworking Tools