Easy Wood Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re after because all the ideas and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so he could gather enough material for an extensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are in fact many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People that are only getting started will discover the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any project of their choice in this bundle quite readily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Nonetheless, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available throughout the internet. Ted has done his very best to direct them in every possible way he can, through easy to comprehend textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools which novices will need. You may always add to your toolbox as you get experience!

Easy Wood Furniture Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the authors in woodworking magazines do a story on how best to increase your woodworking craft. Whether it is showing you the way to apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Easy Wood Furniture Plans

If you are a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you don’t have the right information, education, and ability, you may land up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a few essential factors that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not begin a project if you’re not interested, as this may land you in a bad place.

2. Think of the primary reason behind making this woodworking project. Choose the uses of this thing you are making.

3. Consider your skills and analyze the time you have, before you start with a project.

4. Start projects which you can finish. If you are in the middle of some work, then it is better to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Easy Wood Furniture Plans

If you maintain these essential things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you wish to start with. As a beginner, always select a job which has quite a basic construct up or a very simple construction. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you can always move to the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Easy Wood Furniture Plans

Tools would be the ways through which you can win the battle of woodworking. A lot of men and women think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking jobs. Based on the type of job that you would like to complete, pricing could be determined. The simple the job, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to buy any more material aside from the wood ply.

Time and Directions

Instructions are among the primary things which every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to understand the procedure, what to do and the way to do it. Time also plays an important part in the construction of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword that can help you to achieve success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you know the purpose of woodworking, the thing you need to build, the tools you require in order to possess and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Easy Wood Furniture Plans

All these strategies and education will create the woodworking projects and plans for novices fast to complete. Always make sure you have all of the vital tools, materials, space ready. Read the instructions for constructing an item handy. Proper strategy and planning can allow you to make a great woodworking job for your home.

|

The Benefits of Woodworking Easy Wood Furniture Plans

People when looking for a way to pass time or desire an alternative method to make money they usually turn into a hobby that they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be quite careful when choosing which project to start out with because there are projects which may be too tough for a beginner. But don’t worry about that because we will give you tips on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you pick your job you have to know if you have the available tools to work on such a job. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Easy Wood Furniture Plans

Woodworking in your home will provide you time to explore unique projects and learn a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at some time learning about various projects.
It is very important you know more about different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood they use will allow you to prepare the wood you’ll need for certain jobs you may want to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to satisfy your needs.

Easy Wood Furniture Plans practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so that you can get the hang of using the tools. When starting out you can earn a range of errors but with time you will learn how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Wood Furniture Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop can produce a wide variety of simple projects that can allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you will do your woodworking, based on the size of your home, you might have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved spot on your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns located in the basement draw up dust into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the remainder of the family. A fantastic compromise might be the garage of your property.

This can help minimize the difficulties of dust and sound, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Wood Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to function in. Easy Wood Furniture Plans if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can stay in place from project to project. If this setup is not hopeless, at least try to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, establish a seat area where you can store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to house your hands power tools along with a pegboard above the bench to hang additional gear. Put in a woodworking vice at one end of the bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Wood Furniture Plans

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are an abundance of quality gently used tools out there which belong to people who embarked on that one molding project around the house or obtained tools as presents which they will never utilize. You can usually purchase tools for these sellers for under half of the initial cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require extra time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a few added bucks on a cheap piece of gear. The excess cost of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the gear you wished you’d.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when exposed to elevated sound levels. Last, put on a cap to keep the dust from your hair. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I am shielding my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw after the popular name, this may prove to be the most flexible tool in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be used to build an entire house. At some point, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your second job. After selecting the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid blade. All these have a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut curves. It is perfect for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents occur. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll discover your palm sander with just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper borders, sew high stains and fix any imperfections in timber pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a set of the longest clamps that you can afford. You may get in touch with them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed in the end of your bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the user to rapidly open and close the jaws with no tedious handle turning. The timber clamping surfaces on your vice will periodically need replacement. I prefer to utilize soft pine in my vices that will not crush or damage many of the various woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Purchase a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you may not use the tape at these lengths, the bigger tape steps provide more rigid tapes that will not flop around and slip off the ending of planks. Measuring when you are by yourself will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not many glues are created equal. Avoid cheap home brands sold as carpenter’s glue. The cost of glue through all your jobs is a minor cost consideration. For that reason, it makes sense to go with the very best. I also have found over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Easy Wood Furniture Plans

The peaceful gratification of woodworking is an excellent adventure in this era of rushed lives, smart phones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Wood finishing

Wood finishing refers to the process of refining or protecting a wooden surface, especially in the production of furniture where typically it represents between 5 and 30% of manufacturing costs.[1][2]

Finishing is the final step of the manufacturing process that gives wood surfaces desirable characteristics, including enhanced appearance and increased resistance to moisture and other environmental agents. Finishing can also make wood easier to clean[3] and keep it sanitized, sealing pores that can be breeding grounds for bacteria. Finishing can also influence other wood properties, for example tonal qualities of musical instruments and hardness of flooring.[4][5] In addition, finishing provides a way of giving low-value woods the appearance of ones that are expensive and difficult to obtain.

Finishing of wood requires careful planning to ensure that the finished piece looks attractive, performs well in service and meets safety and environmental requirements.[6] Planning for finishing begins with the design of furniture.[6] Care should be taken to ensure that edges of furniture are rounded so they can be adequately coated and are able to resist wear and cracking. Careful attention should also be given to the design and strength of wooden joints to ensure they do not open-up in service and crack the overlying finish.[7] Care should also be taken to eliminate recesses in furniture, which are difficult to finish with some systems, especially UV-cured finishes.[8]

Video: Woodworking Tools