Easy Wood Furniture Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People who are just getting started will discover the ideas and projects in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice within this bundle quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it will be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that can be found across the net. Ted has done his very best to direct them in every conceivable way he can, through easy to understand textual directions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it is certainly worth buying!

The Benefits of Woodworking Easy Wood Furniture Projects

Woodworking is one hobby that could also be a rewarding career if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll be able to construct all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Easy Wood Furniture Projects.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will have the ability to build some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They’ll ask: How did you make it? How long did it take to finish the job? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your work, a feeling of pride will encounter you and also do not be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Easy Wood Furniture Projects

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Easy Wood Furniture Projects.

Begin with a concept in your mind of what you would like to build and then get a excellent woodworking project plan that’s geared toward beginners. There are several small woodworking projects for beginners available for purchase from online woodworking merchants. Obviously, you can begin with as expansive a woodworking program as you choose. However, the odds are if you begin with a small woodworking job at first, you will have a better prospect of keyword finishing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Just buy what you want to finish your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you may not use all that frequently. When you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry place to work and may need a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You can always add to your toolbox as you gain experience!

Easy Wood Furniture Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. However, if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Every month the authors in woodworking publications do a story about how to increase your woodworking craft. When it’s showing you the way to apply an end to a finished job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Easy Wood Furniture Projects

If you’re just beginning and very interested in doing a DIY job for home afterward, woodworking can be interesting. If you do not have the right information, instruction, and ability, you might land up spending more time and money than you initially meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a couple of essential factors that you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a special feeling. Do not start a project if you’re not interested, because this might land you in a terrible location.

2. Think of the main reason behind making this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a project.

4. Start projects which you’re able to finish. If you are in the middle of a work, then it’s wise to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Easy Wood Furniture Projects

If you keep these essential things in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects that you wish to begin with. As a newcomer, always select a project that has quite a basic build up or a very simple construction. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always move into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Easy Wood Furniture Projects

Tools are the ways whereby you can win the struggle of woodworking. Many people think that power tools are requires. However, for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws out there on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You can also buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for beginners, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much simple.

8. Additional small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed price on woodworking projects. Based on the type of project that you would like to complete, pricing could be set. The simple the job, the less price it involves. However, at the very beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the project. Purchasing the basic tools will make certain you do not need to buy any more material other than the wood ply.

Time and Directions

Directions are among the principal things that each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is very simple to understand the process, what to do and how to do it. Time also plays an important part in the construction of woodworking projects. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that will allow you to reach success is proper preparation. With proper planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, the thing that you want to construct, the resources you need to own and the typical time you can devote every day; then you are ready to go.

Conclusion, Easy Wood Furniture Projects

All these tips and education is likely to create the woodworking projects and strategies for beginners fast to finish. Always make sure that you have all of the essential tools, materials, space ready. Read the instructions for building an item handy. Appropriate strategy and planning will allow you to make a fantastic woodworking job for your property.

|

The Benefits of Woodworking Easy Wood Furniture Projects

Folks when looking for a way to pass time or desire an alternative way to make money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be very cautious when choosing which project to start out with because there are jobs which can be too difficult for a beginner. But do not worry about that since we will provide you guidelines on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your job you need to know if you have the available tools to work on such a job. Try not to spend a good deal of money on buying gear when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Easy Wood Furniture Projects

Woodworking at home will give you time to research different projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so that you can manage to make errors and at any time learning about different jobs.
It’s extremely important you know about the different types of wood available for making jobs. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what kind of wood that they use can allow you to prepare the wood you’ll need for certain jobs you may want to pursue.
As soon as you know the basics of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to fulfill your needs.

Easy Wood Furniture Projects practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of designs utilizing various tools so you can get the hang of working with the tools. When starting out you may earn a number of errors but with time you will learn how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Easy Wood Furniture Projects

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of gear and equipment. A little home workshop can produce a wide array of simple projects that will help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you will do your woodworking, Depending on the size of your home, you might have the ability to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your very first shop. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the top levels of the house. Another advantage of detached workshops is, of course, the noise level. You can work without bothering the rest of the family. A fantastic compromise could be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Wood Furniture Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Easy Wood Furniture Projects if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top gear can stay in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you get more tools and equipment. In the start, establish a seat area where you are able to shop and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard over the bench to hang additional gear. Put in a woodworking at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Wood Furniture Projects

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools in the regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. You will find an abundance of quality gently used tools out there that belong to people who embarked on that 1 molding job around the home or obtained tools as presents that they won’t ever use. You can usually purchase tools for these sellers for under half of the original price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple extra dollars on a inexpensive piece of gear. The excess cost of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum quantity of hand gear yet generated sophisticated and complex bits. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to elevated noise levels. These can contain earplugs or complete ear keyword muff protectors. I find a excellent pair of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. With this setup I’m protecting my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite name, this may end up being the most flexible instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an entire property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next project. After choosing the right saw put in an excellent blade. Most saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid blade. These possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot only cut corners. It’s ideal for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch version. Through hard lessons learned, I have found that purchasing quality, in this case, is more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t need on your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on your first few projects you’ll find that your palm sander with a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll get this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber bits. {Start with a standard number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it usually requires the novice woodworker a few years to collect a detailed set of wood clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the maximum clamps which you could spend. You may contact them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs without tedious handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the various woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most often used tools. Purchase a good quality name brand tape measure with a wide tape usually in the 25-foot range. Even though in your store you may not use the tape at these spans, the bigger tape steps offer more rigid tapes that will not flop around and slide off the ending of planks. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape steps can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Get the number three and two Robertson set. I discover the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The expense of glue through all of your projects is a minor cost consideration. For that reason, it is sensible to go with the best. I also have found over the years that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Easy Wood Furniture Projects

The peaceful satisfaction of woodworking is a wonderful adventure in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools